From: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
This folds acpi_pci_irq_derive() into acpi_pci_irq_lookup() so it
can be easily used by both acpi_pci_irq_enable() and acpi_pci_irq_disable().
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
---
drivers/acpi/pci_irq.c | 55 +++++++++--------------------------------------
1 files changed, 11 insertions(+), 44 deletions(-)
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index b35e64d..b03bb84 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -382,6 +382,8 @@ static struct acpi_prt_entry *
acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
{
struct acpi_prt_entry *entry;
+ struct pci_dev *bridge;
+ u8 bridge_pin, orig_pin = pin;
entry = acpi_pci_irq_find_prt_entry(dev, pin);
if (entry) {
@@ -390,19 +392,6 @@ acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
return entry;
}
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No %s[%c] _PRT entry\n",
- pci_name(dev), pin_name(pin)));
- return NULL;
-}
-
-static struct acpi_prt_entry *
-acpi_pci_irq_derive(struct pci_dev *dev, int pin)
-{
- struct acpi_prt_entry *entry = NULL;
- struct pci_dev *bridge;
- u8 bridge_pin = 0, orig_pin = pin;
-
-
/*
* Attempt to derive an IRQ for this device from a parent bridge's
* PCI interrupt routing entry (eg. yenta bridge and add-in card bridge).
@@ -423,7 +412,7 @@ acpi_pci_irq_derive(struct pci_dev *dev, int pin)
pin = bridge_pin;
}
- entry = acpi_pci_irq_lookup(bridge, pin);
+ entry = acpi_pci_irq_find_prt_entry(bridge, pin);
if (entry) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Derived GSI for %s INT %c from %s\n",
@@ -467,26 +456,8 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
return 0;
}
- /*
- * First we check the PCI IRQ routing table (PRT) for an IRQ. PRT
- * values override any BIOS-assigned IRQs set during boot.
- */
entry = acpi_pci_irq_lookup(dev, pin);
-
- /*
- * If no PRT entry was found, we'll try to derive an IRQ from the
- * device's parent bridge.
- */
- if (!entry)
- entry = acpi_pci_irq_derive(dev, pin);
-
- if (entry)
- gsi = acpi_pci_allocate_irq(entry, &triggering, &polarity,
- &link);
- else
- gsi = -1;
-
- if (gsi < 0) {
+ if (!entry) {
/*
* IDE legacy mode controller IRQs are magic. Why do compat
* extensions always make such a nasty mess.
@@ -495,6 +466,13 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
(dev->class & 0x05) == 0)
return 0;
}
+
+ if (entry)
+ gsi = acpi_pci_allocate_irq(entry, &triggering, &polarity,
+ &link);
+ else
+ gsi = -1;
+
/*
* No IRQ known to the ACPI subsystem - maybe the BIOS /
* driver reported one, then use it. Exit in any case.
@@ -550,18 +528,7 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (!pin)
return;
- /*
- * First we check the PCI IRQ routing table (PRT) for an IRQ.
- */
entry = acpi_pci_irq_lookup(dev, pin);
-
- /*
- * If no PRT entry was found, we'll try to derive an IRQ from the
- * device's parent bridge.
- */
- if (!entry)
- entry = acpi_pci_irq_derive(dev, pin);
-
if (!entry)
return;
--
1.5.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
