Works better with the boot param "acpi_osi=Linux" Without it, the PS/2 keyboard and USB mouse does not work at all. Here is the rest of the info: [ 0.456522] ACPI: DMI System Vendor: Gateway [ 0.456523] ACPI: DMI Product Name: DX4720-03 [ 0.456524] ACPI: DMI Product Version: To Be Filled By O.E.M. [ 0.456525] ACPI: DMI Board Name: MS-7399 [ 0.456526] ACPI: DMI BIOS Vendor: American Megatrends Inc. [ 0.456528] ACPI: DMI BIOS Date: 08/06/2008 [ 0.456529] ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx .............. [ 0.506485] ACPI Error (uteval-0289): Return object type is incorrect [\_SB_.LATA._CRS] (Node ffff88013fa39160), AE_TYPE [ 0.506492] ACPI Error (uteval-0295): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20080609] [ 0.506496] ACPI Exception (pci_link-0291): AE_TYPE, Evaluating _CRS [20080609] [ 0.506498] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.506550] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 1E, should be 1D [20080609] Attached is all the dmesg. All the best and thank you for your effort, M.T.M.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-9-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 22:15:32 UTC 2008 (Ubuntu 2.6.27-9.19-generic) [ 0.000000] Command line: root=UUID=eea2505d-ad28-4408-b7c1-d2b54eb38e06 ro quiet splash acpi_osi=Linux [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000affa0000 (usable) [ 0.000000] BIOS-e820: 00000000affa0000 - 00000000affae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000affae000 - 00000000affe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000affe0000 - 00000000affee000 (reserved) [ 0.000000] BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff [ 0.000000] last_pfn = 0xaffa0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00affa0000 page 4k [ 0.000000] kernel direct mapping tables up to affa0000 @ 8000-d000 [ 0.000000] last_map_addr: affa0000 end: affa0000 [ 0.000000] init_memory_mapping [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] last_map_addr: 140000000 end: 140000000 [ 0.000000] RAMDISK: 377a9000 - 37fef7a0 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FA620, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT AFFA0000, 004C (r1 GATEWA SYSTEM 20080806 MSFT 97) [ 0.000000] ACPI: FACP AFFA0200, 0084 (r1 080608 FACP1142 20080806 MSFT 97) [ 0.000000] ACPI: DSDT AFFA0620, 635F (r1 A7399 A7399202 202 INTL 20051117) [ 0.000000] ACPI: FACS AFFAE000, 0040 [ 0.000000] ACPI: APIC AFFA0390, 0080 (r1 080608 APIC1142 20080806 MSFT 97) [ 0.000000] ACPI: MCFG AFFA0410, 003C (r1 080608 OEMMCFG 20080806 MSFT 97) [ 0.000000] ACPI: SLIC AFFA0450, 0176 (r1 GATEWA SYSTEM 20080806 MSFT 97) [ 0.000000] ACPI: WDRT AFFA05D0, 0047 (r1 080608 NV-WDRT 20080806 MSFT 97) [ 0.000000] ACPI: OEMB AFFAE040, 0071 (r1 080608 OEMB1142 20080806 MSFT 97) [ 0.000000] ACPI: HPET AFFA6980, 0038 (r1 080608 OEMHPET0 20080806 MSFT 97) [ 0.000000] ACPI: NVHD AFFAE0C0, 0554 (r1 080608 NVHDCP 20080806 MSFT 97) [ 0.000000] ACPI: AWMI AFFAE620, 004E (r1 080608 OEMB1142 20080806 MSFT 97) [ 0.000000] ACPI: SSDT AFFAEF90, 0A7C (r1 DpgPmm CpuPm 12 INTL 20051117) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000c000 - 0000000000033fff] pages 28 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [00377a9000 - 0037fef7a0] RAMDISK ==> [00377a9000 - 0037fef7a0] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #6 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe20004ffffff] PMD -> [ffff880028200000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000affa0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 982847 [ 0.000000] DMA zone: 2110 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 700384 pages, LIFO batch:31 [ 0.000000] Normal zone: 258048 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000affa0000 - 00000000affae000 [ 0.000000] PM: Registered nosave memory: 00000000affae000 - 00000000affe0000 [ 0.000000] PM: Registered nosave memory: 00000000affe0000 - 00000000affee000 [ 0.000000] PM: Registered nosave memory: 00000000affee000 - 00000000afff0000 [ 0.000000] PM: Registered nosave memory: 00000000afff0000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b8000000 (gap: b0000000:4ec00000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 960542 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=eea2505d-ad28-4408-b7c1-d2b54eb38e06 ro quiet splash acpi_osi=Linux [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2499.880 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000 [ 0.004000] Memory: 3788124k/5242880k available (3112k kernel code, 143264k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.76 BogoMIPS (lpj=9999520) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004166] Mount-cache hash table entries: 256 [ 0.004360] Initializing cgroup subsys ns [ 0.004365] Initializing cgroup subsys cpuacct [ 0.004367] Initializing cgroup subsys memory [ 0.004382] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004383] CPU: L2 cache: 2048K [ 0.004386] CPU 0/0 -> Node 0 [ 0.004387] CPU: Physical Processor ID: 0 [ 0.004388] CPU: Processor Core ID: 0 [ 0.004395] CPU0: Thermal monitoring enabled (TM2) [ 0.004396] using mwait in idle threads. [ 0.006289] ACPI: Core revision 20080609 [ 0.007725] ACPI: Checking initramfs for custom DSDT [ 0.317781] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.357909] CPU0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 [ 0.357912] Using local APIC timer interrupts. [ 0.360023] APIC timer calibration result 12499443 [ 0.360024] Detected 12.499 MHz APIC timer. [ 0.360135] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4999.76 BogoMIPS (lpj=9999522) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.448416] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 [ 0.448436] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.452063] Brought up 2 CPUs [ 0.452065] Total of 2 processors activated (9999.52 BogoMIPS). [ 0.452123] CPU0 attaching sched-domain: [ 0.452125] domain 0: span 0-1 level MC [ 0.452127] groups: 0 1 [ 0.452130] domain 1: span 0-1 level NODE [ 0.452131] groups: 0-1 [ 0.452135] CPU1 attaching sched-domain: [ 0.452136] domain 0: span 0-1 level MC [ 0.452137] groups: 1 0 [ 0.452139] domain 1: span 0-1 level NODE [ 0.452141] groups: 0-1 [ 0.452218] net_namespace: 1552 bytes [ 0.452218] Booting paravirtualized kernel on bare hardware [ 0.452264] Time: 19:47:51 Date: 12/08/08 [ 0.452290] NET: Registered protocol family 16 [ 0.452305] ACPI: bus type pci registered [ 0.452305] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.452305] PCI: Not using MMCONFIG. [ 0.452305] PCI: Using configuration type 1 for base access [ 0.452796] ACPI: EC: Look up EC in DSDT [ 0.456520] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.456522] ACPI: DMI System Vendor: Gateway [ 0.456523] ACPI: DMI Product Name: DX4720-03 [ 0.456524] ACPI: DMI Product Version: To Be Filled By O.E.M. [ 0.456525] ACPI: DMI Board Name: MS-7399 [ 0.456526] ACPI: DMI BIOS Vendor: American Megatrends Inc. [ 0.456528] ACPI: DMI BIOS Date: 08/06/2008 [ 0.456529] ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx [ 0.464796] ACPI: Interpreter enabled [ 0.464798] ACPI: (supports S0 S1 S3 S4 S5) [ 0.464811] ACPI: Using IOAPIC for interrupt routing [ 0.464918] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.471674] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.478607] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.488101] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.488922] PCI: 0000:00:03.0 reg 10 io port: [4f00, 4fff] [ 0.488966] PCI: 0000:00:03.1 reg 10 io port: [4900, 493f] [ 0.488979] PCI: 0000:00:03.1 reg 20 io port: [4d00, 4d3f] [ 0.488983] PCI: 0000:00:03.1 reg 24 io port: [4e00, 4e3f] [ 0.489000] pci 0000:00:03.1: PME# supported from D3hot D3cold [ 0.489005] pci 0000:00:03.1: PME# disabled [ 0.489061] PCI: 0000:00:03.3 reg 10 32bit mmio: [fea80000, feafffff] [ 0.489232] PCI: 0000:00:04.0 reg 10 32bit mmio: [fea7f000, fea7ffff] [ 0.489258] pci 0000:00:04.0: supports D1 [ 0.489259] pci 0000:00:04.0: supports D2 [ 0.489260] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489263] pci 0000:00:04.0: PME# disabled [ 0.489286] PCI: 0000:00:04.1 reg 10 32bit mmio: [fea7ec00, fea7ecff] [ 0.489316] pci 0000:00:04.1: supports D1 [ 0.489317] pci 0000:00:04.1: supports D2 [ 0.489318] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489321] pci 0000:00:04.1: PME# disabled [ 0.489360] PCI: 0000:00:08.0 reg 20 io port: [ffa0, ffaf] [ 0.489395] PCI: 0000:00:09.0 reg 10 32bit mmio: [fea78000, fea7bfff] [ 0.489422] pci 0000:00:09.0: PME# supported from D3hot D3cold [ 0.489425] pci 0000:00:09.0: PME# disabled [ 0.489478] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489481] pci 0000:00:0b.0: PME# disabled [ 0.489509] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489511] pci 0000:00:0c.0: PME# disabled [ 0.489540] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489542] pci 0000:00:0d.0: PME# disabled [ 0.489562] PCI: 0000:00:0e.0 reg 10 io port: [d480, d487] [ 0.489566] PCI: 0000:00:0e.0 reg 14 io port: [d400, d403] [ 0.489569] PCI: 0000:00:0e.0 reg 18 io port: [d080, d087] [ 0.489573] PCI: 0000:00:0e.0 reg 1c io port: [d000, d003] [ 0.489576] PCI: 0000:00:0e.0 reg 20 io port: [cc00, cc0f] [ 0.489580] PCI: 0000:00:0e.0 reg 24 32bit mmio: [fea7c000, fea7dfff] [ 0.489613] PCI: 0000:00:0f.0 reg 10 32bit mmio: [fea73000, fea73fff] [ 0.489617] PCI: 0000:00:0f.0 reg 14 io port: [c880, c887] [ 0.489621] PCI: 0000:00:0f.0 reg 18 32bit mmio: [fea7e800, fea7e8ff] [ 0.489625] PCI: 0000:00:0f.0 reg 1c 32bit mmio: [fea7e400, fea7e40f] [ 0.489644] pci 0000:00:0f.0: supports D1 [ 0.489645] pci 0000:00:0f.0: supports D2 [ 0.489646] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489650] pci 0000:00:0f.0: PME# disabled [ 0.489666] PCI: 0000:00:10.0 reg 10 32bit mmio: [fd000000, fdffffff] [ 0.489670] PCI: 0000:00:10.0 reg 14 32bit mmio: [d0000000, dfffffff] [ 0.489677] PCI: 0000:00:10.0 reg 1c 64bit mmio: [fc000000, fcffffff] [ 0.489683] PCI: 0000:00:10.0 reg 30 32bit mmio: [fea40000, fea5ffff] [ 0.489736] PCI: 0000:01:05.0 reg 10 32bit mmio: [febf0000, febfffff] [ 0.489742] PCI: 0000:01:05.0 reg 14 io port: [ec00, ec07] [ 0.489772] pci 0000:01:05.0: PME# supported from D3hot D3cold [ 0.489775] pci 0000:01:05.0: PME# disabled [ 0.489800] PCI: 0000:01:07.0 reg 10 32bit mmio: [febef800, febeffff] [ 0.489806] PCI: 0000:01:07.0 reg 14 io port: [e880, e8ff] [ 0.489839] pci 0000:01:07.0: supports D2 [ 0.489840] pci 0000:01:07.0: PME# supported from D2 D3hot D3cold [ 0.489844] pci 0000:01:07.0: PME# disabled [ 0.489870] pci 0000:00:0a.0: transparent bridge [ 0.489873] PCI: bridge 0000:00:0a.0 io port: [e000, efff] [ 0.489875] PCI: bridge 0000:00:0a.0 32bit mmio: [feb00000, febfffff] [ 0.490020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.490280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.490442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.490553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.490667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.500439] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.500521] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 [ 0.500765] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.501013] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11 [ 0.501256] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.501499] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.504062] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.504307] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 0.504554] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.504801] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.505048] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7 [ 0.505295] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7 [ 0.505541] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 [ 0.505794] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.506045] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 [ 0.506295] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.506485] ACPI Error (uteval-0289): Return object type is incorrect [\_SB_.LATA._CRS] (Node ffff88013fa39160), AE_TYPE [ 0.506492] ACPI Error (uteval-0295): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20080609] [ 0.506496] ACPI Exception (pci_link-0291): AE_TYPE, Evaluating _CRS [20080609] [ 0.506498] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.506550] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 1E, should be 1D [20080609] [ 0.506550] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.506550] pnp: PnP ACPI init [ 0.506550] ACPI: bus type pnp registered [ 0.512357] pnp: PnP ACPI: found 12 devices [ 0.512359] ACPI: ACPI bus type pnp unregistered [ 0.512375] PCI: Using ACPI for IRQ routing [ 0.532059] NET: Registered protocol family 8 [ 0.532062] NET: Registered protocol family 20 [ 0.532085] NetLabel: Initializing [ 0.532085] NetLabel: domain hash size = 128 [ 0.532085] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.532085] NetLabel: unlabeled traffic allowed by default [ 0.532107] PCI-GART: No AMD northbridge found. [ 0.532113] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.532116] hpet0: 3 32-bit timers, 25000000 Hz [ 0.535033] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.535035] actual entries 65586 [ 0.535187] AppArmor: AppArmor Filesystem Enabled [ 0.535211] ACPI: RTC can wake from S4 [ 0.536041] Switched to high resolution mode on CPU 0 [ 0.536469] Switched to high resolution mode on CPU 1 [ 0.548037] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.548041] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.548045] system 00:04: ioport range 0x4000-0x407f has been reserved [ 0.548049] system 00:04: ioport range 0x4080-0x40ff has been reserved [ 0.548053] system 00:04: ioport range 0x4400-0x447f has been reserved [ 0.548056] system 00:04: ioport range 0x4480-0x44ff has been reserved [ 0.548060] system 00:04: ioport range 0x4800-0x487f has been reserved [ 0.548064] system 00:04: ioport range 0x4880-0x48ff has been reserved [ 0.548067] system 00:04: ioport range 0x4900-0x493f has been reserved [ 0.548071] system 00:04: ioport range 0x4c00-0x4c7f has been reserved [ 0.548075] system 00:04: ioport range 0x4c80-0x4cff has been reserved [ 0.548079] system 00:04: iomem range 0xfec80000-0xfed3ffff has been reserved [ 0.548084] system 00:04: iomem range 0xfed45000-0x1fd93ffff could not be reserved [ 0.548088] system 00:04: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.548091] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.548095] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.548106] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.548110] system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.548120] system 00:08: ioport range 0xa00-0xa0f has been reserved [ 0.548128] system 00:08: ioport range 0xa10-0xa1f has been reserved [ 0.548137] system 00:08: ioport range 0xa20-0xa2f has been reserved [ 0.548138] system 00:08: ioport range 0xa30-0xa3f has been reserved [ 0.548143] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.548147] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.548149] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.548151] system 00:0b: iomem range 0x100000-0xbfffffff could not be reserved [ 0.548153] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.553114] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.553117] pci 0000:00:0a.0: IO window: 0xe000-0xefff [ 0.553121] pci 0000:00:0a.0: MEM window: 0xfeb00000-0xfebfffff [ 0.553124] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.553128] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.553129] pci 0000:00:0b.0: IO window: disabled [ 0.553132] pci 0000:00:0b.0: MEM window: disabled [ 0.553134] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.553137] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.553139] pci 0000:00:0c.0: IO window: disabled [ 0.553141] pci 0000:00:0c.0: MEM window: disabled [ 0.553144] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.553147] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.553148] pci 0000:00:0d.0: IO window: disabled [ 0.553151] pci 0000:00:0d.0: MEM window: disabled [ 0.553153] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.553162] pci 0000:00:0a.0: setting latency timer to 64 [ 0.553167] pci 0000:00:0b.0: setting latency timer to 64 [ 0.553172] pci 0000:00:0c.0: setting latency timer to 64 [ 0.553176] pci 0000:00:0d.0: setting latency timer to 64 [ 0.553179] bus: 00 index 0 io port: [0, ffff] [ 0.553180] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.553182] bus: 01 index 0 io port: [e000, efff] [ 0.553183] bus: 01 index 1 mmio: [feb00000, febfffff] [ 0.553184] bus: 01 index 2 mmio: [0, 0] [ 0.553185] bus: 01 index 3 io port: [0, ffff] [ 0.553187] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 0.553188] bus: 02 index 0 mmio: [0, 0] [ 0.553189] bus: 02 index 1 mmio: [0, 0] [ 0.553190] bus: 02 index 2 mmio: [0, 0] [ 0.553191] bus: 02 index 3 mmio: [0, 0] [ 0.553192] bus: 03 index 0 mmio: [0, 0] [ 0.553193] bus: 03 index 1 mmio: [0, 0] [ 0.553194] bus: 03 index 2 mmio: [0, 0] [ 0.553195] bus: 03 index 3 mmio: [0, 0] [ 0.553197] bus: 04 index 0 mmio: [0, 0] [ 0.553198] bus: 04 index 1 mmio: [0, 0] [ 0.553199] bus: 04 index 2 mmio: [0, 0] [ 0.553200] bus: 04 index 3 mmio: [0, 0] [ 0.553209] NET: Registered protocol family 2 [ 0.592195] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.593697] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.598207] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.598776] TCP: Hash tables configured (established 524288 bind 65536) [ 0.598778] TCP reno registered [ 0.608159] NET: Registered protocol family 1 [ 0.608267] checking if image is initramfs... it is [ 1.234690] Freeing initrd memory: 8473k freed [ 1.241385] audit: initializing netlink socket (disabled) [ 1.241413] type=2000 audit(1228765671.240:1): initialized [ 1.246298] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.248215] VFS: Disk quotas dquot_6.5.1 [ 1.248280] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.248367] msgmni has been set to 7415 [ 1.248462] io scheduler noop registered [ 1.248464] io scheduler anticipatory registered [ 1.248465] io scheduler deadline registered [ 1.248564] io scheduler cfq registered (default) [ 1.271070] pci 0000:00:10.0: Boot video device [ 1.271174] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.271202] pcieport-driver 0000:00:0b.0: found MSI capability [ 1.271228] pci_express 0000:00:0b.0:pcie00: allocate port service [ 1.271261] pci_express 0000:00:0b.0:pcie03: allocate port service [ 1.271327] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.271354] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.271377] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.271407] pci_express 0000:00:0c.0:pcie03: allocate port service [ 1.271473] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.271500] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.271522] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.271555] pci_express 0000:00:0d.0:pcie03: allocate port service [ 1.296616] Linux agpgart interface v0.103 [ 1.296621] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.296752] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.297303] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.298624] brd: module loaded [ 1.298680] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.298764] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.298765] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.298873] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.316761] mice: PS/2 mouse device common for all mice [ 1.316857] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.316890] rtc0: alarms up to one year, y3k, hpet irqs [ 1.316919] cpuidle: using governor ladder [ 1.316920] cpuidle: using governor menu [ 1.317225] TCP cubic registered [ 1.317379] registered taskstats version 1 [ 1.317502] Magic number: 4:888:798 [ 1.317574] tty ptyr6: hash matches [ 1.317646] rtc_cmos 00:05: setting system clock to 2008-12-08 19:47:52 UTC (1228765672) [ 1.317648] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.317649] EDD information not available. [ 1.317684] Freeing unused kernel memory: 536k freed [ 1.317964] Write protecting the kernel read-only data: 4348k [ 1.338743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.432374] fuse init (API version 7.9) [ 1.526274] ACPI: SSDT AFFAE670, 0277 (r1 DpgPmm P001Ist 11 INTL 20051117) [ 1.526602] processor ACPI0007:00: registered as cooling_device0 [ 1.526605] ACPI: Processor [P001] (supports 8 throttling states) [ 1.526916] ACPI: SSDT AFFAEB00, 0277 (r1 DpgPmm P002Ist 12 INTL 20051117) [ 1.527220] processor ACPI0007:01: registered as cooling_device1 [ 1.528818] ACPI: Expecting a [Reference] package element, found type C [ 1.528945] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.529137] ACPI: Thermal Zone [THRM] (33 C) [ 1.754216] No dock devices found. [ 1.763177] SCSI subsystem initialized [ 1.780888] libata version 3.00 loaded. [ 1.782108] usbcore: registered new interface driver usbfs [ 1.782137] usbcore: registered new interface driver hub [ 1.782189] usbcore: registered new device driver usb [ 1.782417] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 1.784516] pata_amd 0000:00:08.0: version 0.3.10 [ 1.784587] pata_amd 0000:00:08.0: setting latency timer to 64 [ 1.786258] scsi0 : pata_amd [ 1.786443] scsi1 : pata_amd [ 1.787826] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 1.787828] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 1.789454] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.955072] ata2: port disabled. ignoring. [ 1.957550] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.957559] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 1.957572] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.957574] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.957623] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 1.957644] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfea7f000 [ 2.014227] usb usb1: configuration #1 chosen from 1 choice [ 2.014252] hub 1-0:1.0: USB hub found [ 2.014262] hub 1-0:1.0: 10 ports detected [ 2.220687] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 2.220698] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 2.220716] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 2.220719] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 2.220743] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 2.220779] ehci_hcd 0000:00:04.1: debug port 1 [ 2.220783] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 2.220801] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfea7ec00 [ 2.232012] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.232142] usb usb2: configuration #1 chosen from 1 choice [ 2.232162] hub 2-0:1.0: USB hub found [ 2.232168] hub 2-0:1.0: 10 ports detected [ 2.440267] ahci 0000:00:0e.0: version 3.0 [ 2.440638] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 [ 2.440643] ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21 [ 2.440727] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 2.440730] ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio [ 2.440733] ahci 0000:00:0e.0: setting latency timer to 64 [ 2.441012] scsi2 : ahci [ 2.441071] scsi3 : ahci [ 2.441118] scsi4 : ahci [ 2.441166] scsi5 : ahci [ 2.441235] ata3: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c100 irq 2300 [ 2.441237] ata4: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c180 irq 2300 [ 2.441239] ata5: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c200 irq 2300 [ 2.441240] ata6: SATA max UDMA/133 abar m8192@0xfea7c000 port 0xfea7c280 irq 2300 [ 2.884017] usb 2-7: new high speed USB device using ehci_hcd and address 4 [ 2.924518] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.925326] ata3.00: ATA-8: WDC WD6400AAKS-22A7B0, 01.03B01, max UDMA/133 [ 2.925328] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.926207] ata3.00: configured for UDMA/133 [ 3.052970] usb 2-7: configuration #1 chosen from 1 choice [ 3.244517] ata4: SATA link down (SStatus 0 SControl 300) [ 3.356018] usb 1-3: new low speed USB device using ohci_hcd and address 2 [ 3.565171] usb 1-3: configuration #1 chosen from 1 choice [ 3.872030] usb 1-4: new full speed USB device using ohci_hcd and address 3 [ 4.081185] usb 1-4: configuration #1 chosen from 1 choice [ 4.132515] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.133877] ata5.00: ATAPI: Optiarc DVD RW AD-7203S, 1-B0, max UDMA/100 [ 4.135253] ata5.00: configured for UDMA/100 [ 4.452016] ata6: SATA link down (SStatus 0 SControl 300) [ 4.452153] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5 [ 4.453733] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7203S 1-B0 PQ: 0 ANSI: 5 [ 4.453862] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 4.454249] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 4.454256] forcedeth 0000:00:0f.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 4.454260] forcedeth 0000:00:0f.0: setting latency timer to 64 [ 4.972767] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:21:85:71:19:35 [ 4.972770] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 4.973161] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 [ 4.973167] ohci1394 0000:01:07.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19 [ 5.025864] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[febef800-febeffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.036731] scsi 2:0:0:0: Attached scsi generic sg0 type 0 [ 5.036758] scsi 4:0:0:0: Attached scsi generic sg1 type 5 [ 5.052489] usbcore: registered new interface driver libusual [ 5.057857] Initializing USB Mass Storage driver... [ 5.059269] scsi6 : SCSI emulation for USB Mass Storage devices [ 5.061309] usbcore: registered new interface driver usb-storage [ 5.061312] USB Mass Storage support registered. [ 5.061327] usb-storage: device found at 4 [ 5.061328] usb-storage: waiting for device to settle before scanning [ 5.061412] usbcore: registered new interface driver hiddev [ 5.080326] Driver 'sd' needs updating - please use bus_type methods [ 5.081163] sd 2:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB) [ 5.081481] sd 2:0:0:0: [sda] Write Protect is off [ 5.081484] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.081511] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.081578] sd 2:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB) [ 5.081591] sd 2:0:0:0: [sda] Write Protect is off [ 5.081592] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.081614] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.081617] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 5.102194] sda1 sda2 sda3 < sda5 > [ 5.122070] sd 2:0:0:0: [sda] Attached SCSI disk [ 5.128471] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.128475] Uniform CD-ROM driver Revision: 3.20 [ 5.128556] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.301358] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc100091926d01] [ 11.060172] usb-storage: device scan complete [ 11.065924] scsi 6:0:0:0: Direct-Access IOI CF/M icroDrive Disk.. 1.09 PQ: 0 ANSI: 0 CCS [ 11.067099] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 11.067205] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 15.064116] usbhid: timeout initializing reports [ 15.064254] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on usb-0000:00:04.1-7 [ 15.069608] input: USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb1/1-3/1-3:1.0/input/input2 [ 15.092123] input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:04.0-3 [ 15.092151] usbcore: registered new interface driver usbhid [ 15.092153] usbhid: v2.6:USB HID core driver [ 20.227499] kjournald starting. Commit interval 5 seconds [ 20.227513] EXT3-fs: mounted filesystem with ordered data mode. [ 23.938643] udevd version 124 started [ 24.259423] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 24.276534] ACPI: Power Button (FF) [PWRF] [ 24.276633] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 24.308531] ACPI: Power Button (CM) [PWRB] [ 24.403836] ACPI: WMI: Mapper loaded [ 24.694978] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 24.717442] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.905737] Linux video capture interface: v2.00 [ 25.005761] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 25.148910] nvidia: module license 'NVIDIA' taints kernel. [ 25.403612] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23 [ 25.403617] nvidia 0000:00:10.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23 [ 25.403622] nvidia 0000:00:10.0: setting latency timer to 64 [ 25.404026] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008 [ 25.432593] gspca: main v2.2.0 registered [ 25.452036] gspca: probing 0c45:608f [ 25.459700] gspca: probe ok [ 25.459713] gspca: probing 0c45:608f [ 25.459719] gspca: probing 0c45:608f [ 25.459736] usbcore: registered new interface driver sonixb [ 25.459738] sonixb: registered [ 25.612797] usbcore: registered new interface driver snd-usb-audio [ 25.649584] HDA Intel 0000:00:09.0: power state changed by ACPI to D0 [ 25.649953] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 25.649957] HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 25.649978] HDA Intel 0000:00:09.0: setting latency timer to 64 [ 26.942024] lp: driver loaded but no devices found [ 27.415887] EXT3 FS on sda5, internal journal [ 28.037585] type=1505 audit(1228783699.196:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4185 [ 28.037735] type=1505 audit(1228783699.196:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4185 [ 28.143573] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.136648] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 29.376681] NET: Registered protocol family 10 [ 29.378265] lo: Disabled Privacy Extensions [ 29.514910] ppdev: user-space parallel port driver [ 35.204363] NET: Registered protocol family 17 [ 45.280010] eth0: no IPv6 routers present
