Hi, I am running Linux kernel 2.6.28-rc5. I get the following warning message during boot in dmesg: [ 21.425678] ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] What does it mean? Is it a serious problem? The laptop is a Clevo D410J. The dmesg attached. Regards, Márton Németh
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800 [ 0.000000] Linux version 2.6.28-rc5 (nmarci@europa) (gcc version 4.3.2 (Debian 4.3.2-1) ) #1 PREEMPT Wed Nov 19 21:24:54 CET 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) [ 0.000000] BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3bf70 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-d000 [ 0.000000] ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BF7AFC0, 0040 [ 0.000000] ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 71MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00009000 - 0000ff00 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 00008b8350] TEXT DATA BSS ==> [0000100000 - 00008b8350] [ 0.000000] #2 [00008b9000 - 00008bd000] INIT_PG_TABLE ==> [00008b9000 - 00008bd000] [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f6870] 000f6870 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003bf70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003bf70 [ 0.000000] On node 0 totalpages: 245519 [ 0.000000] free_area_init_node: node 0, pgdat c042a280, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 143 pages used for memmap [ 0.000000] HighMem zone: 18147 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243600 [ 0.000000] Kernel command line: root=/dev/hda3 ro acpi.debug_layer=0x00090004 acpi.debug_level=0x01f resume=/dev/hda2 log_buf_len=128M [ 0.000000] log_buf_len: 134217728 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1603.357 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000999] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000999] ... MAX_LOCK_DEPTH: 48 [ 0.000999] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000999] ... CLASSHASH_SIZE: 4096 [ 0.000999] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.000999] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.000999] ... CHAINHASH_SIZE: 8192 [ 0.000999] memory used by lock dependency info: 2335 kB [ 0.000999] per task-struct memory footprint: 1152 bytes [ 0.000999] ------------------------ [ 0.000999] | Locking API testsuite: [ 0.000999] ---------------------------------------------------------------------------- [ 0.000999] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000999] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000999] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000999] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] recursive read-lock: | ok | | ok | [ 0.000999] recursive read-lock #2: | ok | | ok | [ 0.000999] mixed read-write-lock: | ok | | ok | [ 0.000999] mixed write-read-lock: | ok | | ok | [ 0.000999] -------------------------------------------------------------------------- [ 0.000999] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000999] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000999] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000999] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000999] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000999] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000999] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000999] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000999] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000999] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000999] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000999] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000999] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000999] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000999] hard-irq read-recursion/123: ok | [ 0.000999] soft-irq read-recursion/123: ok | [ 0.000999] hard-irq read-recursion/132: ok | [ 0.000999] soft-irq read-recursion/132: ok | [ 0.000999] hard-irq read-recursion/213: ok | [ 0.000999] soft-irq read-recursion/213: ok | [ 0.000999] hard-irq read-recursion/231: ok | [ 0.000999] soft-irq read-recursion/231: ok | [ 0.000999] hard-irq read-recursion/312: ok | [ 0.000999] soft-irq read-recursion/312: ok | [ 0.000999] hard-irq read-recursion/321: ok | [ 0.000999] soft-irq read-recursion/321: ok | [ 0.000999] ------------------------------------------------------- [ 0.000999] Good, all 218 testcases passed! | [ 0.000999] --------------------------------- [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 834284k/982464k available (2289k kernel code, 147536k reserved, 987k data, 328k init, 73160k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) [ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000999] .init : 0xc0436000 - 0xc0488000 ( 328 kB) [ 0.000999] .data : 0xc033c771 - 0xc0433498 ( 987 kB) [ 0.000999] .text : 0xc0100000 - 0xc033c771 (2289 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.001031] Calibrating delay loop (skipped), value calculated using timer frequency.. 3206.71 BogoMIPS (lpj=1603357) [ 0.001291] Mount-cache hash table entries: 512 [ 0.002263] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002324] CPU: L2 Cache: 128K (64 bytes/line) [ 0.002380] Intel machine check architecture supported. [ 0.002437] Intel machine check reporting enabled on CPU#0. [ 0.002504] CPU: Mobile AMD Sempron(tm) Processor 2600+ stepping 00 [ 0.002653] Checking 'hlt' instruction... OK. [ 0.006472] Freeing SMP alternatives: 0k freed [ 0.006528] ACPI: Core revision 20080926 [ 0.018856] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.029011] net_namespace: 800 bytes [ 0.029549] NET: Registered protocol family 16 [ 0.031124] EISA bus registered [ 0.031229] ACPI: bus type pci registered [ 0.038928] PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 [ 0.038998] PCI: Using configuration type 1 for base access [ 0.046983] ACPI: EC: Look up EC in DSDT [ 0.056783] ACPI: Interpreter enabled [ 0.056848] ACPI: (supports S0 S3 S4 S5) [ 0.057097] ACPI: Using IOAPIC for interrupt routing [ 0.072739] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.571980] ACPI: EC: missing confirmations, switch off interrupt mode. [ 0.577013] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 [ 0.577077] ACPI: EC: driver started in poll mode [ 0.577372] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.577805] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff] [ 0.578231] pci 0000:00:01.0: supports D1 [ 0.578284] pci 0000:00:08.0: reg 10 io port: [0x1000-0x10ff] [ 0.578292] pci 0000:00:08.0: reg 14 32bit mmio: [0xd0004000-0xd00040ff] [ 0.578329] pci 0000:00:08.0: supports D1 D2 [ 0.578332] pci 0000:00:08.0: PME# supported from D1 D2 D3hot D3cold [ 0.578396] pci 0000:00:08.0: PME# disabled [ 0.578497] pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.578509] pci 0000:00:0c.0: supports D1 D2 [ 0.578512] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.578572] pci 0000:00:0c.0: PME# disabled [ 0.578678] pci 0000:00:0e.0: reg 10 32bit mmio: [0xd0001000-0xd0001fff] [ 0.578686] pci 0000:00:0e.0: reg 14 32bit mmio: [0xd0000000-0xd0000fff] [ 0.578722] pci 0000:00:0e.0: supports D1 D2 [ 0.578725] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold [ 0.578785] pci 0000:00:0e.0: PME# disabled [ 0.578881] pci 0000:00:0e.1: reg 10 32bit mmio: [0xd0003000-0xd0003fff] [ 0.578889] pci 0000:00:0e.1: reg 14 32bit mmio: [0xd0002000-0xd0002fff] [ 0.578925] pci 0000:00:0e.1: supports D1 D2 [ 0.578928] pci 0000:00:0e.1: PME# supported from D1 D2 D3hot D3cold [ 0.578957] pci 0000:00:0e.1: PME# disabled [ 0.579083] pci 0000:00:10.0: reg 20 io port: [0x1c00-0x1c1f] [ 0.579104] pci 0000:00:10.0: supports D1 D2 [ 0.579107] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.579167] pci 0000:00:10.0: PME# disabled [ 0.579291] pci 0000:00:10.1: reg 20 io port: [0x1c20-0x1c3f] [ 0.579313] pci 0000:00:10.1: supports D1 D2 [ 0.579315] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.579375] pci 0000:00:10.1: PME# disabled [ 0.579491] pci 0000:00:10.2: reg 20 io port: [0x1c40-0x1c5f] [ 0.579512] pci 0000:00:10.2: supports D1 D2 [ 0.579515] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.579575] pci 0000:00:10.2: PME# disabled [ 0.579671] pci 0000:00:10.3: reg 10 32bit mmio: [0xd0004400-0xd00044ff] [ 0.579713] pci 0000:00:10.3: supports D1 D2 [ 0.579715] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.579776] pci 0000:00:10.3: PME# disabled [ 0.579969] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.580032] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.580092] pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB [ 0.580220] pci 0000:00:11.1: reg 20 io port: [0x1c60-0x1c6f] [ 0.580291] pci 0000:00:11.5: reg 10 io port: [0x1400-0x14ff] [ 0.580334] pci 0000:00:11.5: supports D1 D2 [ 0.580388] pci 0000:00:11.6: reg 10 io port: [0x1800-0x18ff] [ 0.580670] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.580677] pci 0000:01:00.0: reg 14 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.580698] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.580707] pci 0000:01:00.0: supports D1 D2 [ 0.580749] pci 0000:00:01.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.580755] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf3ffffff] [ 0.580789] bus 00 -> node 0 [ 0.580811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.605535] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. [ 0.606280] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. [ 0.607040] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. [ 0.607469] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. [ 0.607996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) [ 0.608696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 [ 0.609409] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 [ 0.610173] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.612493] PCI: Using ACPI for IRQ routing [ 0.613268] pnp: PnP ACPI init [ 0.613268] ACPI: bus type pnp registered [ 0.623728] pnp: PnP ACPI: found 11 devices [ 0.623790] ACPI: ACPI bus type pnp unregistered [ 0.623880] system 00:05: iomem range 0x0-0x9ffff could not be reserved [ 0.623941] system 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 0.624054] system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.624125] system 00:05: iomem range 0xffee0000-0xffefffff has been reserved [ 0.624185] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.624245] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.624321] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.624380] system 00:06: ioport range 0xfe10-0xfe11 has been reserved [ 0.624439] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.624499] system 00:06: ioport range 0x4000-0x407f has been reserved [ 0.624558] system 00:06: ioport range 0x8100-0x811f could not be reserved [ 0.661608] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf4000000-0xf3ffffff] [ 0.661684] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.661741] pci 0000:00:01.0: IO window: disabled [ 0.661800] pci 0000:00:01.0: MEM window: 0xd1000000-0xd1ffffff [ 0.661859] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff [ 0.661933] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:02 [ 0.661997] pci 0000:00:0c.0: IO window: 0x002000-0x0020ff [ 0.662056] pci 0000:00:0c.0: IO window: 0x002400-0x0024ff [ 0.662115] pci 0000:00:0c.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.662175] pci 0000:00:0c.0: MEM window: 0x54000000-0x57ffffff [ 0.662250] pci 0000:00:01.0: setting latency timer to 64 [ 0.662259] pci 0000:00:0c.0: enabling device (0000 -> 0003) [ 0.662329] pci 0000:00:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.662394] pci 0000:00:0c.0: setting latency timer to 64 [ 0.662399] bus: 00 index 0 io port: [0x00-0xffff] [ 0.662454] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.662510] bus: 01 index 0 mmio: [0x0-0x0] [ 0.662565] bus: 01 index 1 mmio: [0xd1000000-0xd1ffffff] [ 0.662621] bus: 01 index 2 mmio: [0xf0000000-0xf3ffffff] [ 0.662677] bus: 01 index 3 mmio: [0x0-0x0] [ 0.662732] bus: 02 index 0 io port: [0x2000-0x20ff] [ 0.662787] bus: 02 index 1 io port: [0x2400-0x24ff] [ 0.662842] bus: 02 index 2 mmio: [0x50000000-0x53ffffff] [ 0.662898] bus: 02 index 3 mmio: [0x54000000-0x57ffffff] [ 0.663025] NET: Registered protocol family 2 [ 0.663460] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.664144] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.665425] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.671420] TCP: Hash tables configured (established 131072 bind 65536) [ 0.671523] TCP reno registered [ 0.671793] NET: Registered protocol family 1 [ 0.675201] audit: initializing netlink socket (disabled) [ 0.675328] type=2000 audit(1227136378.674:1): initialized [ 0.677994] highmem bounce pool size: 64 pages [ 0.678758] msgmni has been set to 1487 [ 0.679364] io scheduler noop registered [ 0.679449] io scheduler cfq registered (default) [ 0.679538] PCI: VIA PCI bridge detected.Disabling DAC. [ 0.679722] pci 0000:01:00.0: Boot video device [ 0.686699] isapnp: Scanning for PnP cards... [ 1.043334] isapnp: No Plug & Play device found [ 1.161997] Switched to high resolution mode on CPU 0 [ 1.198823] Uniform Multi-Platform E-IDE driver [ 1.199319] via82cxxx 0000:00:11.1: VIA vt8235 (rev 00) IDE UDMA133 [ 1.199381] via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06) [ 1.199561] pci 0000:00:11.1: power state changed by ACPI to D0 [ 1.199764] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug [ 1.199940] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 [ 1.200000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 [ 1.200144] pci 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 23 (level, low) -> IRQ 23 [ 1.200335] via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later [ 1.200408] ide0: BM-DMA at 0x1c60-0x1c67 [ 1.200472] ide1: BM-DMA at 0x1c68-0x1c6f [ 1.200529] Probing IDE interface ide0... [ 1.586112] hda: SAMSUNG MP0804H, ATA DISK drive [ 2.198344] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 2.198413] hda: UDMA/100 mode selected [ 2.198529] Probing IDE interface ide1... [ 2.992111] hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive [ 3.604235] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.604348] hdc: UDMA/33 mode selected [ 3.604695] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.701857] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.703922] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.704427] ide-gd driver 1.18 [ 3.704587] hda: max request size: 512KiB [ 3.704786] hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 [ 3.705348] hda: cache flushes supported [ 3.705712] hda: hda1 hda2 hda3 [ 3.708741] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.711783] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.713159] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.713247] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.713305] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.713363] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.713421] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.714426] cpuidle: using governor ladder [ 3.714486] cpuidle: using governor menu [ 3.714855] TCP cubic registered [ 3.714913] NET: Registered protocol family 17 [ 3.715033] Using IPI Shortcut mode [ 3.737905] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.954141] ReiserFS: hda3: found reiserfs format "3.6" with standard journal [ 3.954265] ReiserFS: hda3: using ordered data mode [ 3.963274] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 3.965618] ReiserFS: hda3: checking transaction log (hda3) [ 4.044467] ReiserFS: hda3: Using r5 hash to sort names [ 4.044653] VFS: Mounted root (reiserfs filesystem) readonly. [ 4.045169] Freeing unused kernel memory: 328k freed [ 4.045394] Write protecting the kernel text: 2292k [ 4.045519] Write protecting the kernel read-only data: 800k [ 21.311731] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 21.312201] processor ACPI_CPU:00: registered as cooling_device0 [ 21.328615] input: Power Button (FF) as /class/input/input1 [ 21.335250] ACPI: Power Button (FF) [PWRF] [ 21.335535] input: Power Button (CM) as /class/input/input2 [ 21.342201] ACPI: Power Button (CM) [PWB] [ 21.342441] input: Sleep Button (CM) as /class/input/input3 [ 21.349249] ACPI: Sleep Button (CM) [SLPB] [ 21.349513] input: Lid Switch as /class/input/input4 [ 21.354149] ACPI: Lid Switch [LID] [ 21.385359] ACPI: AC Adapter [AC] (on-line) [ 21.425678] ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] [ 21.432415] ACPI: Battery Slot [BAT0] (battery present) [ 21.449375] ACPI: Invalid active0 threshold [ 21.449917] thermal LNXTHERM:01: registered as thermal_zone0 [ 21.453303] ACPI: Thermal Zone [THRM] (50 C) [ 21.740395] Serial: 8250/16550 driver4 ports, IRQ sharing disabled [ 21.740797] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 21.762348] parport_pc 00:0a: reported by Plug and Play ACPI [ 21.762597] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 21.989980] input: Video Bus as /class/input/input5 [ 21.998245] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 22.030551] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.143744] 8139too Fast Ethernet driver 0.9.28 [ 22.143882] 8139too 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 22.144833] eth0: RealTek RTL8139 at 0xf84a6000, 00:90:f5:3e:5a:ca, IRQ 19 [ 22.144894] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 22.305250] usbcore: registered new interface driver usbfs [ 22.305471] usbcore: registered new interface driver hub [ 22.305665] usbcore: registered new device driver usb [ 22.368427] yenta_cardbus 0000:00:0c.0: CardBus bridge found [1558:4702] [ 22.368513] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI [ 22.368582] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI [ 22.368644] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x00001002, devctl 0x44 [ 22.591762] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0820, PCI irq 16 [ 22.591827] yenta_cardbus 0000:00:0c.0: Socket status: 30000006 [ 22.703826] input: PC Speaker as /class/input/input6 [ 22.749961] uhci_hcd: USB Universal Host Controller Interface driver [ 22.750303] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug [ 22.750482] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 [ 22.750542] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 [ 22.750609] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 22.750699] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 22.754230] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 22.754370] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 [ 22.755166] usb usb1: configuration #1 chosen from 1 choice [ 22.755676] hub 1-0:1.0: USB hub found [ 22.755903] hub 1-0:1.0: 2 ports detected [ 22.757575] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 22.757666] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 22.757824] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 22.757933] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 [ 22.758395] usb usb2: configuration #1 chosen from 1 choice [ 22.758573] hub 2-0:1.0: USB hub found [ 22.758650] hub 2-0:1.0: 2 ports detected [ 22.759272] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 22.759364] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 22.759523] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 22.759633] uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 [ 22.760090] usb usb3: configuration #1 chosen from 1 choice [ 22.760256] hub 3-0:1.0: USB hub found [ 22.760333] hub 3-0:1.0: 2 ports detected [ 22.791317] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.791382] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 22.791522] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKD] -> GSI 21 (level, low) -> IRQ 21 [ 22.791731] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 22.791912] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 22.792101] ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 [ 22.798204] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 22.798748] usb usb4: configuration #1 chosen from 1 choice [ 22.798928] hub 4-0:1.0: USB hub found [ 22.799107] hub 4-0:1.0: 6 ports detected [ 22.867407] ide-cd driver 5.00 [ 22.876822] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 22.877156] Uniform CD-ROM driver Revision: 3.20 [ 23.184071] Marking TSC unstable due to TSC halts in idle [ 23.423079] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 23.492633] input: PS/2 Generic Mouse as /class/input/input7 [ 23.676741] usb 1-2: configuration #1 chosen from 1 choice [ 23.689561] VIA 82xx Modem 0000:00:11.6: power state changed by ACPI to D0 [ 23.689761] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug [ 23.689934] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 23.689994] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 23.691573] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 23.692052] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 23.724834] mice: PS/2 mouse device common for all mice [ 23.831679] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: clean. [ 23.835301] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean. [ 23.836496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean. [ 23.837960] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 23.848425] input: PS/2 Mouse as /class/input/input8 [ 23.872288] input: AlpsPS/2 ALPS GlidePoint as /class/input/input9 [ 23.876203] usbcore: registered new interface driver usbhid [ 23.876270] usbhid: v2.6:USB HID core driver [ 24.094164] input: USB Keyboard as /class/input/input10 [ 24.095457] bright 0003:1241:1503.0001: input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:10.0-2/input0 [ 24.185549] input: USB Keyboard as /class/input/input11 [ 24.186513] bright 0003:1241:1503.0002: input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:10.0-2/input1 [ 24.198297] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0 [ 24.198376] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 24.198608] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 26.168421] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k [ 37.686757] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu cores) (version 2.20.00) [ 37.687485] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 [ 37.687543] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 [ 37.688482] powernow-k8: ph2 null fid transition 0x8 [ 38.219801] Linux agpgart interface v0.103 [ 39.127354] [drm] Initialized drm 1.1.0 20060810 [ 39.487512] pci 0000:01:00.0: power state changed by ACPI to D0 [ 39.487590] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 39.489377] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 39.600175] leds_clevo_mail: 'Clevo D410J' found [ 39.600893] Registered led device: clevo::mail [ 50.014487] ReiserFS: hda1: found reiserfs format "3.6" with standard journal [ 50.014601] ReiserFS: hda1: using ordered data mode [ 50.019220] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 50.020695] ReiserFS: hda1: checking transaction log (hda1) [ 50.087378] ReiserFS: hda1: Using r5 hash to sort names [ 51.445106] ip_tables: (C) 2000-2006 Netfilter Core Team [ 51.810882] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 55.551178] NET: Registered protocol family 10 [ 59.020170] lp0: using parport0 (interrupt-driven). [ 59.050185] ppdev: user-space parallel port driver [ 63.661065] Clocksource tsc unstable (delta = -129277605 ns) [ 64.395180] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 65.766039] eth0: no IPv6 routers present
