Re: [PATCH] Cleanup of i7300_idle based on review comments

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



applied to acpi-test

thanks,
-len

On Wed, 22 Oct 2008, Venki Pallipadi wrote:

> 
> 
> Cleanup of i7300 idle driver based on review comments from Randy Dunlap,
> Andi Kleen and Len Brown.
> 
> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@xxxxxxxxx>
> 
> ---
>  drivers/idle/Kconfig      |   11 ++++++-----
>  drivers/idle/i7300_idle.c |   33 ++++++++++++++++++---------------
>  2 files changed, 24 insertions(+), 20 deletions(-)
> 
> Index: linux-acpi-2.6/drivers/idle/Kconfig
> ===================================================================
> --- linux-acpi-2.6.orig/drivers/idle/Kconfig	2008-10-22 11:43:08.000000000 -0700
> +++ linux-acpi-2.6/drivers/idle/Kconfig	2008-10-22 11:43:37.000000000 -0700
> @@ -5,12 +5,13 @@ config I7300_IDLE_IOAT_CHANNEL
>  	bool
>  
>  config I7300_IDLE
> -	tristate "Intel chipset idle power saving driver"
> +	tristate "Intel chipset idle memory power saving driver"
>  	select I7300_IDLE_IOAT_CHANNEL
> -	depends on X86_64
> +	depends on X86_64 && EXPERIMENTAL
>  	help
> -	  Enable idle power savings with certain Intel server chipsets.
> -	  The chipset must have I/O AT support, such as the Intel 7300.
> -	  The power savings depends on the type and quantity of DRAM devices.
> +	  Enable memory power savings when idle with certain Intel server
> +	  chipsets. The chipset must have I/O AT support, such as the
> +	  Intel 7300. The power savings depends on the type and quantity of
> +	  DRAM devices.
>  
>  endmenu
> Index: linux-acpi-2.6/drivers/idle/i7300_idle.c
> ===================================================================
> --- linux-acpi-2.6.orig/drivers/idle/i7300_idle.c	2008-10-22 11:43:08.000000000 -0700
> +++ linux-acpi-2.6/drivers/idle/i7300_idle.c	2008-10-22 11:43:37.000000000 -0700
> @@ -35,6 +35,8 @@
>  #define I7300_IDLE_DRIVER_VERSION	"1.55"
>  #define I7300_PRINT			"i7300_idle:"
>  
> +#define MAX_STOP_RETRIES	10
> +
>  static int debug;
>  module_param_named(debug, debug, uint, 0644);
>  MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
> @@ -47,12 +49,12 @@ MODULE_PARM_DESC(debug, "Enable debug pr
>   *  0 = No throttling
>   *  1 = Throttle when > 4 activations per eval window (Maximum throttling)
>   *  2 = Throttle when > 8 activations
> - *  168 = Throttle when > 168 activations (Minimum throttling)
> + *  168 = Throttle when > 672 activations (Minimum throttling)
>   */
> -#define MAX_THRTLWLIMIT		168
> -static uint i7300_idle_thrtlowlm = 1;
> -module_param_named(thrtlwlimit, i7300_idle_thrtlowlm, uint, 0644);
> -MODULE_PARM_DESC(thrtlwlimit,
> +#define MAX_THROTTLE_LOW_LIMIT		168
> +static uint throttle_low_limit = 1;
> +module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644);
> +MODULE_PARM_DESC(throttle_low_limit,
>  		"Value for THRTLOWLM activation field "
>  		"(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)");
>  
> @@ -111,9 +113,9 @@ static int i7300_idle_ioat_start(void)
>  static void i7300_idle_ioat_stop(void)
>  {
>  	int i;
> -	u8 sts;
> +	u64 sts;
>  
> -	for (i = 0; i < 5; i++) {
> +	for (i = 0; i < MAX_STOP_RETRIES; i++) {
>  		writeb(IOAT_CHANCMD_RESET,
>  			ioat_chanbase + IOAT1_CHANCMD_OFFSET);
>  
> @@ -127,9 +129,10 @@ static void i7300_idle_ioat_stop(void)
>  
>  	}
>  
> -	if (i == 5)
> -		dprintk("failed to suspend+reset I/O AT after 5 retries\n");
> -
> +	if (i == MAX_STOP_RETRIES) {
> +		dprintk("failed to stop I/O AT after %d retries\n",
> +			MAX_STOP_RETRIES);
> +	}
>  }
>  
>  /* Test I/O AT by copying 1024 byte from 2k to 1k */
> @@ -276,7 +279,7 @@ static void __exit i7300_idle_ioat_exit(
>  	i7300_idle_ioat_stop();
>  
>  	/* Wait for a while for the channel to halt before releasing */
> -	for (i = 0; i < 10; i++) {
> +	for (i = 0; i < MAX_STOP_RETRIES; i++) {
>  		writeb(IOAT_CHANCMD_RESET,
>  		       ioat_chanbase + IOAT1_CHANCMD_OFFSET);
>  
> @@ -390,9 +393,9 @@ static void i7300_idle_start(void)
>  	new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT;
>  	pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl);
>  
> -	limit = i7300_idle_thrtlowlm;
> -	if (unlikely(limit > MAX_THRTLWLIMIT))
> -		limit = MAX_THRTLWLIMIT;
> +	limit = throttle_low_limit;
> +	if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT))
> +		limit = MAX_THROTTLE_LOW_LIMIT;
>  
>  	pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit);
>  
> @@ -441,7 +444,7 @@ static int i7300_idle_notifier(struct no
>  	static ktime_t idle_begin_time;
>  	static int time_init = 1;
>  
> -	if (!i7300_idle_thrtlowlm)
> +	if (!throttle_low_limit)
>  		return 0;
>  
>  	if (unlikely(time_init)) {
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux