attached
Gateway P-7811 FX
Thanks for the great work.
BIOS EBDA/lowmem at: 0009f400/0009f400
Linux version 2.6.27-git9 (drtyrell@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #2 SMP PREEMPT Thu Oct 23 01:27:15 EDT 2008
Command line: root=UUID=b1edd8da-628f-4937-a7ad-cc36a597253d ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf8b1000 (usable)
BIOS-e820: 00000000bf8b1000 - 00000000bf8b7000 (reserved)
BIOS-e820: 00000000bf8b7000 - 00000000bf9bc000 (usable)
BIOS-e820: 00000000bf9bc000 - 00000000bfa0f000 (reserved)
BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable)
BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved)
BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
BIOS-e820: 00000000bfd1f000 - 00000000bfd64000 (usable)
BIOS-e820: 00000000bfd64000 - 00000000bfd9f000 (ACPI NVS)
BIOS-e820: 00000000bfd9f000 - 00000000bfde5000 (usable)
BIOS-e820: 00000000bfde5000 - 00000000bfdfd000 (ACPI data)
BIOS-e820: 00000000bfdfd000 - 00000000bfe00000 (usable)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbfe00 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00bfe00000 page 2M
kernel direct mapping tables up to bfe00000 @ 8000-c000
last_map_addr: bfe00000 end: bfe00000
init_memory_mapping
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ a000-10000
last_map_addr: 140000000 end: 140000000
RAMDISK: 37b08000 - 37fefc92
ACPI: RSDP 000F6EF0, 0024 (r2 PTLTD )
ACPI: XSDT BFDF56E6, 005C (r1 GATEWA SYSTEM 6040000 BNWG 0)
ACPI: FACP BFDE7000, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
ACPI: DSDT BFDE8000, 74A4 (r2 Intel CANTIGA 6040000 MSFT 3000000)
ACPI: FACS BFD9EFC0, 0040
ACPI: HPET BFDFCD86, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG BFDFCDBE, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: SLIC BFDFCDFA, 0176 (r1 GATEWA SYSTEM 6040000 GWNB 1)
ACPI: APIC BFDFCF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: BOOT BFDFCFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
ACPI: SSDT BFDE6000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(7 early reservations) ==> bootmem [0000000000 - 0140000000
#0 [0000000000 - 0000001000
#1 [0000006000 - 0000008000
#2 [0000200000 - 000062fa78
#3 [0037b08000 - 0037fefc92
#4 [000009f400 - 0000100000
#5 [0000008000 - 000000a000
#6 [000000a000 - 000000b000
[ffffe20000000000-ffffe200045fffff
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[9
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x000bf8b1
0: 0x000bf8b7 -> 0x000bf9bc
0: 0x000bfa0f -> 0x000bfb08
0: 0x000bfd0f -> 0x000bfd18
0: 0x000bfd1f -> 0x000bfd64
0: 0x000bfd9f -> 0x000bfde5
0: 0x000bfdfd -> 0x000bfe00
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1047269
DMA zone: 56 pages used for memmap
DMA zone: 1173 pages reserved
DMA zone: 2770 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 766846 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00
ACPI: LAPIC (acpi_id[0x01
ACPI: LAPIC_NMI (acpi_id[0x00
ACPI: LAPIC_NMI (acpi_id[0x01
ACPI: IOAPIC (id[0x02
IOAPIC[0
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at c0000000 (gap: bfe00000:40200000)
PERCPU: Allocating 49152 bytes of per cpu data
NR_CPUS: 4, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1028176
Kernel command line: root=UUID=b1edd8da-628f-4937-a7ad-cc36a597253d ro quiet splash
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2261.164 MHz processor.
Console: colour VGA+ 80x25
console [tty0
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 4034668k/5242880k available (2119k kernel code, 153412k reserved, 1320k data, 332k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4524.75 BogoMIPS (lpj=7537213)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20080609
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
APIC calibration not consistent with PM Timer: 301ms instead of 100ms
APIC delta adjusted to PM-Timer: 1662497 (5015958)
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4523.43 BogoMIPS (lpj=7536695)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1
Brought up 2 CPUs
Total of 2 processors activated (9047.19 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 912 bytes
Time: 17:56:18 Date: 10/23/08
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: Gateway
ACPI: DMI Product Name: P-7811FX
ACPI: DMI Product Version: Gateway MG1
ACPI: DMI Board Name:
ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
ACPI: DMI BIOS Date: 08/28/2008
ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@xxxxxxxxxxxxxxx
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f
pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4504800-0xf4504bff
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f
pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f
pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4504c00-0xf4504fff
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7
pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7
pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef
pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3
pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4504000-0xf45047ff
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff
pci 0000:02:00.0: reg 10 64bit mmio: [0xf4000000-0xf4003fff
pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff
pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff
pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf40fffff
pci 0000:04:00.0: reg 10 64bit mmio: [0xf4100000-0xf4101fff
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: bridge 32bit mmio: [0xf4100000-0xf41fffff
pci 0000:00:1c.4: bridge io port: [0x4000-0x4fff
pci 0000:00:1c.4: bridge 32bit mmio: [0xf2000000-0xf3ffffff
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff
pci 0000:0d:06.0: reg 10 32bit mmio: [0xf4200000-0xf4200fff
pci 0000:0d:06.0: reg 14 32bit mmio: [0xf4202000-0xf42027ff
pci 0000:0d:06.0: supports D1 D2
pci 0000:0d:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:06.0: PME# disabled
pci 0000:0d:06.2: reg 10 32bit mmio: [0xf4202800-0xf42028ff
pci 0000:0d:06.2: supports D1 D2
pci 0000:0d:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:06.2: PME# disabled
pci 0000:0d:06.3: reg 10 32bit mmio: [0xf4201000-0xf4201fff
pci 0000:0d:06.3: supports D1 D2
pci 0000:0d:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0d:06.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf42fffff
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT
ACPI: PCI Interrupt Link [LNKA
ACPI: PCI Interrupt Link [LNKB
ACPI: PCI Interrupt Link [LNKC
ACPI: PCI Interrupt Link [LNKD
ACPI: PCI Interrupt Link [LNKE
ACPI: PCI Interrupt Link [LNKF
ACPI: PCI Interrupt Link [LNKG
ACPI: PCI Interrupt Link [LNKH
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:07: ioport range 0x480-0x48f has been reserved
system 00:07: ioport range 0xffff-0xffff has been reserved
system 00:07: ioport range 0xffff-0xffff has been reserved
system 00:07: ioport range 0x400-0x47f has been reserved
system 00:07: ioport range 0x1180-0x11ff has been reserved
system 00:07: ioport range 0xfe00-0xfe00 has been reserved
system 00:07: iomem range 0xff800000-0xff800fff has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xf4000000-0xf40fffff
pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c00fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xf4100000-0xf41fffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4: IO window: 0x4000-0x4fff
pci 0000:00:1c.4: MEM window: 0xf2000000-0xf3ffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xf4200000-0xf42fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff
bus: 01 index 0 io port: [0x2000-0x2fff
bus: 01 index 1 mmio: [0xcc000000-0xceffffff
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff
bus: 01 index 3 mmio: [0x0-0x0
bus: 02 index 0 io port: [0x3000-0x3fff
bus: 02 index 1 mmio: [0xf4000000-0xf40fffff
bus: 02 index 2 mmio: [0xc0000000-0xc00fffff
bus: 02 index 3 mmio: [0x0-0x0
bus: 03 index 0 mmio: [0x0-0x0
bus: 03 index 1 mmio: [0x0-0x0
bus: 03 index 2 mmio: [0x0-0x0
bus: 03 index 3 mmio: [0x0-0x0
bus: 04 index 0 mmio: [0x0-0x0
bus: 04 index 1 mmio: [0xf4100000-0xf41fffff
bus: 04 index 2 mmio: [0x0-0x0
bus: 04 index 3 mmio: [0x0-0x0
bus: 05 index 0 io port: [0x4000-0x4fff
bus: 05 index 1 mmio: [0xf2000000-0xf3ffffff
bus: 05 index 2 mmio: [0xf0000000-0xf1ffffff
bus: 05 index 3 mmio: [0x0-0x0
bus: 0d index 0 mmio: [0x0-0x0
bus: 0d index 1 mmio: [0xf4200000-0xf42fffff
bus: 0d index 2 mmio: [0x0-0x0
bus: 0d index 3 io port: [0x00-0xffff
bus: 0d index 4 mmio: [0x000000-0xffffffffffffffff
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 5023k freed
Simple Boot Flag at 0x57 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1224784586.824:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 7891
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:01.0: irq 47 for MSI/MSI-X
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie02: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pcieport-driver 0000:00:1c.0: irq 46 for MSI/MSI-X
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pcieport-driver 0000:00:1c.1: irq 45 for MSI/MSI-X
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pcieport-driver 0000:00:1c.2: irq 44 for MSI/MSI-X
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pcieport-driver 0000:00:1c.4: irq 43 for MSI/MSI-X
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
Linux agpgart interface v0.103
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, , hpet irqs irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
Magic number: 12:447:947
tty tty4: hash matches
rtc_cmos 00:08: setting system clock to 2008-10-23 17:56:27 UTC (1224784587)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 332k freed
fuse init (API version 7.10)
ACPI: SSDT BFD1AC20, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT BFD18620, 0549 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1
input: AT Translated Set 2 keyboard as /class/input/input0
processor ACPI0007:00: registered as cooling_device0
ACPI: SSDT BFD19CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624)
ACPI: SSDT BFD19F20, 008D (r1 PmRef ApCst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1
processor ACPI0007:01: registered as cooling_device1
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZS0
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZS1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf4504800
sky2 driver version 1.22
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 (chip 0xba) chip revision 0
No dock devices found.
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4504c00
SCSI subsystem initialized
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
sky2 0000:02:00.0: Marvell Yukon 88E8057 Gigabit Ethernet Controller
Part Number: Yukon 88E8057
Engineering Level: Rev. 1.1
Manufacturer: Marvell
sky2 0000:02:00.0: irq 42 for MSI/MSI-X
sky2 eth0: addr 00:1d:72:c2:16:97
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504180 irq 41
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504380 irq 41
usb 7-3: new high speed USB device using ehci_hcd and address 2
Clocksource tsc unstable (delta = -159528579 ns)
usb 7-3: configuration #1 chosen from 1 choice
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9200420AS, 3.AAA, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
usb 5-1: new low speed USB device using uhci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input1
generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: Optiarc DVD RW AD-7583S, LX01, max UDMA/100, ATAPI AN
ata6.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST9200420AS 3.AA PQ: 0 ANSI: 5
scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7583S LX01 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sd 0:0:0:0: [sda
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: [sda
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
udevd version 124 started
input: Power Button (FF) as /class/input/input2
ACPI: WMI: Mapper loaded
ACPI: Power Button (FF) [PWRF
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID0
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB
cfg80211: Calling CRDA to update world regulatory domain
nvidia: module license 'NVIDIA' taints kernel.
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1280b1, caps: 0xa04711/0xa04000
ACPI: Battery Slot [BAT0
ACPI: AC Adapter [ADP1
input: SynPS/2 Synaptics TouchPad as /class/input/input5
Linux video capture interface: v2.00
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:06.2: SDHCI controller found [1217:7120
sdhci-pci 0000:0d:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
mmc0: Unknown controller version (2). You may experience problems.
mmc0: SDHCI controller on PCI [0000:0d:06.2
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 177.80 Wed Oct 1 14:43:46 PDT 2008
uvcvideo: Found UVC 1.00 device Gateway USB 2.0 Webcam (04f2:b027)
input: Gateway USB 2.0 Webcam as /class/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:04:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f
ACPI: Device needs an ACPI driver
i2c /dev entries driver
Adding 4000144k swap on /dev/sda6. Priority:-1 extents:1 across:4000144k
EXT3 FS on sda5, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
platform microcode: firmware: requesting intel-ucode/06-17-06
platform microcode: firmware: requesting intel-ucode/06-17-06
Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx> <peter.oruba@xxxxxxx>
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
nvidia 0000:01:00.0: irq 39 for MSI/MSI-X
sky2 eth0: enabling interface
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:04:00.0: irq 38 for MSI/MSI-X
iwlagn 0000:04:00.0: firmware: requesting iwlwifi-5000-1.ucode
iwlagn: Radio disabled by HW RF Kill switch
NET: Registered protocol family 17
nvidia 0000:01:00.0: irq 39 for MSI/MSI-X
nm-system-setti[5902
sky2 eth0: disabling interface
iwlagn 0000:04:00.0: PCI INT A disabled
NetworkManager[5889
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
nvidia 0000:01:00.0: irq 39 for MSI/MSI-X
sky2 eth0: enabling interface
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:04:00.0: irq 38 for MSI/MSI-X
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
iwlagn: Error sending REPLY_ADD_STA: time out after 500ms.
iwlagn: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
sky2 eth0: disabling interface
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
iwlagn 0000:04:00.0: PCI INT A disabled
sky2 eth0: enabling interface
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:04:00.0: irq 38 for MSI/MSI-X
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
iwlagn: Error sending REPLY_ADD_STA: time out after 500ms.
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
wlan0: direct probe to AP 00:13:49:23:e2:6a try 2
wlan0: direct probe to AP 00:13:49:23:e2:6a try 3
wlan0: direct probe to AP 00:13:49:23:e2:6a timed out
iwlagn: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
wlan0: direct probe to AP 00:13:49:23:e2:6a try 2
wlan0: direct probe to AP 00:13:49:23:e2:6a try 3
wlan0: direct probe to AP 00:13:49:23:e2:6a timed out
iwlagn: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
iwlagn: Error sending REPLY_STATISTICS_CMD: enqueue_hcmd failed: -5
iwlagn 0000:04:00.0: PCI INT A disabled
iwlagn 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:04:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
iwlagn 0000:04:00.0: irq 38 for MSI/MSI-X
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
wlan0: direct probe to AP 00:13:49:23:e2:6a try 2
wlan0: direct probe to AP 00:13:49:23:e2:6a try 3
wlan0: direct probe to AP 00:13:49:23:e2:6a timed out
wlan0: direct probe to AP 00:13:49:23:e2:6a try 1
wlan0: direct probe to AP 00:13:49:23:e2:6a try 2
wlan0: direct probe to AP 00:13:49:23:e2:6a try 3
wlan0: direct probe to AP 00:13:49:23:e2:6a timed out
wlan0: direct probe to AP 00:18:39:74:6f:ae try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:18:39:74:6f:ae
wlan0: authenticated
wlan0: associate with AP 00:18:39:74:6f:ae
wlan0: RX AssocResp from 00:18:39:74:6f:ae (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: disassociating by local choice (reason=3)
wlan0: deauthenticated
wlan0: direct probe to AP 00:0d:14:00:98:92 try 1
wlan0: direct probe to AP 00:0d:14:00:98:92 try 1
wlan0 direct probe responded
wlan0: authenticate with AP 00:0d:14:00:98:92
wlan0: authenticated
wlan0: associate with AP 00:0d:14:00:98:92
wlan0: RX AssocResp from 00:0d:14:00:98:92 (capab=0x431 status=0 aid=1)
wlan0: associated
CE: hpet increasing min_delta_ns to 15000 nsec
