From: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx> Attempt to preserve fan state across sleep and hibernation if the fan control mode is enabled. For safety reasons, only the PWM OFF (fan at 100%) or maximum closed-loop level (level 7) are preserved. If the fan state was set to anything else, it will not be restored. Also, should the fan be at PWM OFF mode at resume, it will be left at that state (but this is extremely unlikely, no ThinkPad firmware was ever reported to do this). For reference, the known states used for fan control upon resume by the firmware are either "auto" or "level 7" depending on whether the laptop wakes due to normal conditions or a thermal emergency. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11331 Signed-off-by: Henrique de Moraes Holschuh <hmh@xxxxxxxxxx> Cc: Richard Hartmann <richih.mailinglist@xxxxxxxxx> Signed-off-by: Len Brown <len.brown@xxxxxxxxx> --- drivers/misc/thinkpad_acpi.c | 48 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 48 insertions(+), 0 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 6b93007..1dcf066 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -5983,6 +5983,52 @@ static void fan_exit(void) flush_workqueue(tpacpi_wq); } +static void fan_suspend(pm_message_t state) +{ + if (!fan_control_allowed) + return; + + /* Store fan status in cache */ + fan_get_status_safe(NULL); + if (tp_features.fan_ctrl_status_undef) + fan_control_desired_level = TP_EC_FAN_AUTO; +} + +static void fan_resume(void) +{ + u8 saved_fan_level; + u8 current_level = 7; + bool do_set = false; + + /* DSDT *always* updates status on resume */ + tp_features.fan_ctrl_status_undef = 0; + + saved_fan_level = fan_control_desired_level; + if (!fan_control_allowed || + (fan_get_status_safe(¤t_level) < 0)) + return; + + switch (fan_control_access_mode) { + case TPACPI_FAN_WR_ACPI_SFAN: + do_set = (saved_fan_level > current_level); + break; + case TPACPI_FAN_WR_ACPI_FANS: + case TPACPI_FAN_WR_TPEC: + do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) || + (saved_fan_level == 7 && + !(current_level & TP_EC_FAN_FULLSPEED))); + break; + default: + return; + } + if (do_set) { + printk(TPACPI_NOTICE + "restoring fan level to 0x%02x\n", + saved_fan_level); + fan_set_level_safe(saved_fan_level); + } +} + static int fan_read(char *p) { int len = 0; @@ -6174,6 +6220,8 @@ static struct ibm_struct fan_driver_data = { .read = fan_read, .write = fan_write, .exit = fan_exit, + .suspend = fan_suspend, + .resume = fan_resume, }; /**************************************************************************** -- 1.5.5.1 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
