[PATCH 055/122] ACPI suspend: Always use the 32-bit waking vector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rafael J. Wysocki <rjw@xxxxxxx>

According to the ACPI specification 2.0c and later, the 64-bit waking vector
should be cleared and the 32-bit waking vector should be used, unless we want
the wake-up code to be called by the BIOS in Protected Mode.  Moreover, some
systems (for example HP dv5-1004nr) are known to fail to resume if the 64-bit
waking vector is used.  Therefore, modify the code to clear the 64-bit waking
vector, for FACS version 1 or greater, and set the 32-bit one before suspend.

http://bugzilla.kernel.org/show_bug.cgi?id=11368

Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
---
 drivers/acpi/hardware/hwsleep.c |   39 ++++++++++++---------------------------
 1 files changed, 12 insertions(+), 27 deletions(-)

diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 130a44b..25dccdf 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -78,19 +78,17 @@ acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
 		return_ACPI_STATUS(status);
 	}
 
-	/* Set the vector */
+	/*
+	 * According to the ACPI specification 2.0c and later, the 64-bit
+	 * waking vector should be cleared and the 32-bit waking vector should
+	 * be used, unless we want the wake-up code to be called by the BIOS in
+	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
+	 * to fail to resume if the 64-bit vector is used.
+	 */
+	if (facs->version >= 1)
+		facs->xfirmware_waking_vector = 0;
 
-	if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
-		/*
-		 * ACPI 1.0 FACS or short table or optional X_ field is zero
-		 */
-		facs->firmware_waking_vector = (u32) physical_address;
-	} else {
-		/*
-		 * ACPI 2.0 FACS with valid X_ field
-		 */
-		facs->xfirmware_waking_vector = physical_address;
-	}
+	facs->firmware_waking_vector = (u32)physical_address;
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -134,20 +132,7 @@ acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
 	}
 
 	/* Get the vector */
-
-	if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
-		/*
-		 * ACPI 1.0 FACS or short table or optional X_ field is zero
-		 */
-		*physical_address =
-		    (acpi_physical_address) facs->firmware_waking_vector;
-	} else {
-		/*
-		 * ACPI 2.0 FACS with valid X_ field
-		 */
-		*physical_address =
-		    (acpi_physical_address) facs->xfirmware_waking_vector;
-	}
+	*physical_address = (acpi_physical_address)facs->firmware_waking_vector;
 
 	return_ACPI_STATUS(AE_OK);
 }
-- 
1.5.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux