Introduce acpi_root_table=rsdt boot param and dmi list to force rsdt References: http://bugzilla.kernel.org/show_bug.cgi?id=8246 Blacklist R40e, R51e and T40, T40p, T41, T41p, T42, T42p, R50 and R50p ThinkPads to use the RSDT instead of the XSDT. R40e (c-states freeze machine) and R51e (slow booting) have known problems. The rest share one BIOS and have been added in hope that this bug gets solved, but this is not proven: T41p shutting down due to "temperature critical" https://bugzilla.novell.com/show_bug.cgi?id=378327 I saw a kind of fixed temperature offset with the exact same machine models and exact same BIOS. Short after cold boot the one machine showed about 15 degree C more than the other. This looked like wrong, too high temperature values read from EC on the one machine. I never found out why, this could explain and fix it, but I did not double check. It does not matter to have this BIOS also use 32 bit addresses, XP and OpenSUSE 11.0 does that and it works fine. Signed-off-by: Thomas Renninger <trenn@xxxxxxx> Tested-by: Mark Doughty <me@xxxxxxxxxxxxxxxxx> CC: Yakui Zhao <yakui.zhao@xxxxxxxxx> --- Documentation/kernel-parameters.txt | 5 ++++ drivers/acpi/tables.c | 37 ++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -237,6 +237,11 @@ and is between 256 and 4096 characters. to assume that this machine's pmtimer latches its value and always returns good values. + acpi_root_table= [X86,ACPI] + { rsdt } + rsdt: Take RSDT address for fetching + ACPI tables (instead of XSDT) + agp= [AGP] { off | try_unsupported } off: disable AGP support --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -32,6 +32,7 @@ #include <linux/errno.h> #include <linux/acpi.h> #include <linux/bootmem.h> +#include <linux/dmi.h> #define PREFIX "ACPI: " @@ -282,6 +283,37 @@ static void __init check_multiple_madt(v return; } +static struct dmi_system_id __initdata acpi_rsdt_dmi_table[] = { + { + .ident = "ThinkPad ", /* R40e, broken C-states */ + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "IBM"), + DMI_MATCH(DMI_BIOS_VERSION, "1SET")}, + }, + { + .ident = "ThinkPad ", /* R50e, slow booting */ + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "IBM"), + DMI_MATCH(DMI_BIOS_VERSION, "1WET")}, + }, + { + .ident = "ThinkPad ", /* T40, T40p, T41, T41p, T42, T42p + R50, R50p */ + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "IBM"), + DMI_MATCH(DMI_BIOS_VERSION, "1RET")}, + }, + {} +}; + +static int __init acpi_force_rsdt(char *opt) +{ + if (!strcmp(opt, "rsdt")) + acpi_gbl_force_rsdt = 1; + return 0; +} +early_param("acpi_root_table", acpi_force_rsdt); + /* * acpi_table_init() * @@ -293,6 +325,11 @@ static void __init check_multiple_madt(v int __init acpi_table_init(void) { + if (dmi_check_system(acpi_rsdt_dmi_table)) + acpi_gbl_force_rsdt = 1; + if (acpi_gbl_force_rsdt) + printk(KERN_INFO "Using RSDT as ACPI root table\n"); + acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0); check_multiple_madt(); return 0; -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
