Subject:ACPI: Set FAN device to correct state in boot phase From: Zhao Yakui <yakui.zhao@xxxxxxxxx> On some laptops when ACPI FAN driver is loaded, maybe the FAN device will be turned on. But if the temperature is below the threshold, the corresponding FAN device should be turned off in the course of loading thermal driver. So it is necessary to set the FAN device to the correct state in course of loading the thermal driver. http://bugzilla.kernel.org/show_bug.cgi?id=8049 Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx> Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx> --- drivers/acpi/thermal.c | 43 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) Index: linux-2.6/drivers/acpi/thermal.c =================================================================== --- linux-2.6.orig/drivers/acpi/thermal.c +++ linux-2.6/drivers/acpi/thermal.c @@ -769,6 +769,47 @@ static void acpi_thermal_run(unsigned lo acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data); } +static void acpi_thermal_active_off(void *data) +{ + int result = 0; + struct acpi_thermal *tz = data; + int i = 0; + int j = 0; + struct acpi_thermal_active *active = NULL; + + if (!tz) { + printk(KERN_ERR PREFIX "Invalid (NULL) context\n"); + return; + } + + result = acpi_thermal_get_temperature(tz); + if (result) + return; + + for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { + active = &(tz->trips.active[i]); + if (!active || !active->flags.valid) + break; + if (tz->temperature >= active->temperature) { + /* + * If the thermal temperature is greater than the + * active threshod, unnecessary to turn off the + * the active cooling device. + */ + continue; + } + /* + * Below Threshold? + * ---------------- + * Turn OFF all cooling devices associated with this + * threshold. + */ + for (j = 0; j < active->devices.count; j++) + result = acpi_bus_set_power(active->devices.handles[j], + ACPI_STATE_D3); + } +} + static void acpi_thermal_check(void *data) { int result = 0; @@ -1624,6 +1665,8 @@ static int acpi_thermal_add(struct acpi_ init_timer(&tz->timer); + acpi_thermal_active_off(tz); + acpi_thermal_check(tz); status = acpi_install_notify_handler(device->handle, -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
