From: Zhang Rui <rui.zhang@xxxxxxxxx>
Subject: AHCI: Speed-up resume
During resume, sleep 1 second to wait for the HBA reset
to finish is a waste of time.
According to the AHCI 1.2 spec,
We should poll the HOST_CTL register,
and return error if the host reset is not
finished within 1 second.
Test results show that the HBA reset can be done quickly(in usecs).
And this patch may save nearly 1 second during resume.
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Acked-by: Tejun Heo <tj@xxxxxxxxxx>
Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
--
drivers/ata/ahci.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
Index: linux-next/drivers/ata/ahci.c
===================================================================
--- linux-next.orig/drivers/ata/ahci.c
+++ linux-next/drivers/ata/ahci.c
@@ -1142,12 +1142,15 @@ static int ahci_reset_controller(struct
readl(mmio + HOST_CTL); /* flush */
}
- /* reset must complete within 1 second, or
+ /*
+ * to perform host reset, OS should set HOST_RESET
+ * and poll until this bit is read to be "0".
+ * reset must complete within 1 second, or
* the hardware should be considered fried.
*/
- ssleep(1);
+ tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
+ HOST_RESET, 10, 1000);
- tmp = readl(mmio + HOST_CTL);
if (tmp & HOST_RESET) {
dev_printk(KERN_ERR, host->dev,
"controller reset failed (0x%x)\n", tmp);
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
