If an IDE controller is in compatibility mode, it expects to use IRQs 14 and 15, so PNP should avoid them. This patch should resolve this problem report: parallel driver grabs IRQ14 preventing legacy SFF ATA controller from working https://bugzilla.novell.com/show_bug.cgi?id=375836 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@xxxxxx> Index: work14/drivers/pnp/resource.c =================================================================== --- work14.orig/drivers/pnp/resource.c 2008-06-17 16:40:04.000000000 -0600 +++ work14/drivers/pnp/resource.c 2008-06-24 15:39:08.000000000 -0600 @@ -286,6 +286,61 @@ static irqreturn_t pnp_test_handler(int return IRQ_HANDLED; } +#ifdef CONFIG_PCI +static int pci_dev_uses_irq(struct pnp_dev *pnp, struct pci_dev *pci, + unsigned int irq) +{ + u32 class; + u8 progif; + + if (pci->irq == irq) { + dev_dbg(&pnp->dev, "device %s using irq %d\n", + pci_name(pci), irq); + return 1; + } + + /* + * See pci_setup_device() and ata_pci_sff_activate_host() for + * similar IDE legacy detection. + */ + pci_read_config_dword(pci, PCI_CLASS_REVISION, &class); + class >>= 8; /* discard revision ID */ + progif = class & 0xff; + class >>= 8; + + if (class == PCI_CLASS_STORAGE_IDE) { + /* + * Unless both channels are native-PCI mode only, + * treat the compatibility IRQs as busy. + */ + if ((progif & 0x5) != 0x5) + if (pci_get_legacy_ide_irq(pci, 0) == irq || + pci_get_legacy_ide_irq(pci, 1) == irq) { + dev_dbg(&pnp->dev, "legacy IDE device %s " + "using irq %d\n", pci_name(pci), irq); + return 1; + } + } + + return 0; +} +#endif + +static int pci_uses_irq(struct pnp_dev *pnp, unsigned int irq) +{ +#ifdef CONFIG_PCI + struct pci_dev *pci = NULL; + + for_each_pci_dev(pci) { + if (pci_dev_uses_irq(pnp, pci, irq)) { + pci_dev_put(pci); + return 1; + } + } +#endif + return 0; +} + int pnp_check_irq(struct pnp_dev *dev, struct resource *res) { int i; @@ -317,18 +372,9 @@ int pnp_check_irq(struct pnp_dev *dev, s } } -#ifdef CONFIG_PCI /* check if the resource is being used by a pci device */ - { - struct pci_dev *pci = NULL; - for_each_pci_dev(pci) { - if (pci->irq == *irq) { - pci_dev_put(pci); - return 0; - } - } - } -#endif + if (pci_uses_irq(dev, *irq)) + return 0; /* check if the resource is already in use, skip if the * device is active because it itself may be in use */ -- -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
