From: Rafael J. Wysocki <rjw@xxxxxxx>
PCI ACPI: Rework PCI handling of wake-up
* Introduce function acpi_pm_device_sleep_wake() for enabling and
disabling the system wake-up capability of devices that are power
manageable by ACPI.
* Introduce function acpi_bus_can_wakeup() allowing other (dependent)
subsystems to check if ACPI is able to enable the system wake-up
capability of given device.
* Introduce callback .sleep_wake() in struct pci_platform_pm_ops and
for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake().
* Introduce callback .can_wakeup() in struct pci_platform_pm_ops and
for the ACPI 'driver' make it use acpi_bus_can_wakeup().
* Move the PME# handlig code out of pci_enable_wake() and split it
into two functions, pci_pme_capable() and pci_pme_active(),
allowing the caller to check if given device is capable of
generating PME# from given power state and to enable/disable the
device's PME# functionality, respectively.
* Modify pci_enable_wake() to use the new ACPI callbacks and the new
PME#-related functions.
* Drop the generic .platform_enable_wakeup() callback that is not
used any more.
* Introduce device_set_wakeup_capable() that will set the
power.can_wakeup flag of given device.
* Rework PCI device PM initialization so that, if given device is
capable of generating wake-up events, either natively through the
PME# mechanism, or with the help of the platform, its
power.can_wakeup flag is set and its power.should_wakeup flag is
unset as appropriate.
* Make ACPI set the power.can_wakeup flag for devices found to be
wake-up capable by it.
* Make the ACPI wake-up code enable/disable GPEs for devices that
have both power.can_wakeup flag and power.should_wakeup flags
set.
Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
drivers/acpi/bus.c | 11 ++
drivers/acpi/glue.c | 2
drivers/acpi/sleep/main.c | 25 ++++++
drivers/acpi/sleep/wakeup.c | 15 +++
drivers/base/power/sysfs.c | 3
drivers/pci/pci-acpi.c | 19 ++++
drivers/pci/pci.c | 172 ++++++++++++++++++++++++++++++++------------
drivers/pci/pci.h | 8 ++
drivers/pci/probe.c | 47 ------------
include/acpi/acpi_bus.h | 2
include/linux/pm_wakeup.h | 26 +-----
11 files changed, 215 insertions(+), 115 deletions(-)
Index: linux-next/drivers/acpi/sleep/main.c
===================================================================
--- linux-next.orig/drivers/acpi/sleep/main.c
+++ linux-next/drivers/acpi/sleep/main.c
@@ -467,6 +467,31 @@ int acpi_pm_device_sleep_state(struct de
*d_min_p = d_min;
return d_max;
}
+
+/**
+ * acpi_pm_device_sleep_wake - enable or disable the system wake-up
+ * capability of given device
+ * @dev: device to handle
+ * @enable: 'true' - enable, 'false' - disable the wake-up capability
+ */
+int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
+{
+ acpi_handle handle;
+ struct acpi_device *adev;
+
+ if (!device_may_wakeup(dev))
+ return -EINVAL;
+
+ handle = DEVICE_ACPI_HANDLE(dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_DEBUG "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ return enable ?
+ acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+ acpi_disable_wakeup_device_power(adev);
+}
#endif
static void acpi_power_off_prepare(void)
Index: linux-next/drivers/pci/pci-acpi.c
===================================================================
--- linux-next.orig/drivers/pci/pci-acpi.c
+++ linux-next/drivers/pci/pci-acpi.c
@@ -299,10 +299,29 @@ static int acpi_pci_set_power_state(stru
return error;
}
+static bool acpi_pci_can_wakeup(struct pci_dev *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+
+ return handle ? acpi_bus_can_wakeup(handle) : false;
+}
+
+static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+ int error = acpi_pm_device_sleep_wake(&dev->dev, enable);
+
+ if (!error)
+ printk(KERN_INFO "PCI: Wake-up capability of %s %s by ACPI\n",
+ pci_name(dev), enable ? "enabled" : "disabled");
+ return error;
+}
+
static struct pci_platform_pm_ops acpi_pci_platform_pm = {
.is_manageable = acpi_pci_power_manageable,
.set_state = acpi_pci_set_power_state,
.choose_state = acpi_pci_choose_state,
+ .can_wakeup = acpi_pci_can_wakeup,
+ .sleep_wake = acpi_pci_sleep_wake,
};
/* ACPI bus type */
Index: linux-next/drivers/pci/pci.h
===================================================================
--- linux-next.orig/drivers/pci/pci.h
+++ linux-next/drivers/pci/pci.h
@@ -17,6 +17,11 @@ extern void pci_cleanup_rom(struct pci_d
* platform; to be used during system-wide transitions from a
* sleeping state to the working state and vice versa
*
+ * @can_wakeup - returns 'true' if given device is capable of waking up the
+ * system from a sleeping state
+ *
+ * @sleep_wake - enables/disables the system wake up capability of given device
+ *
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.
*/
@@ -24,9 +29,12 @@ struct pci_platform_pm_ops {
bool (*is_manageable)(struct pci_dev *dev);
int (*set_state)(struct pci_dev *dev, pci_power_t state);
pci_power_t (*choose_state)(struct pci_dev *dev);
+ bool (*can_wakeup)(struct pci_dev *dev);
+ int (*sleep_wake)(struct pci_dev *dev, bool enable);
};
extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
+extern void pci_pm_init(struct pci_dev *dev);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
Index: linux-next/include/acpi/acpi_bus.h
===================================================================
--- linux-next.orig/include/acpi/acpi_bus.h
+++ linux-next/include/acpi/acpi_bus.h
@@ -337,6 +337,7 @@ int acpi_bus_get_status(struct acpi_devi
int acpi_bus_get_power(acpi_handle handle, int *state);
int acpi_bus_set_power(acpi_handle handle, int state);
bool acpi_bus_power_manageable(acpi_handle handle);
+bool acpi_bus_can_wakeup(acpi_handle handle);
#ifdef CONFIG_ACPI_PROC_EVENT
int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type,
@@ -383,6 +384,7 @@ acpi_handle acpi_get_pci_rootbridge_hand
#ifdef CONFIG_PM_SLEEP
int acpi_pm_device_sleep_state(struct device *, int *);
+int acpi_pm_device_sleep_wake(struct device *, bool);
#else /* !CONFIG_PM_SLEEP */
static inline int acpi_pm_device_sleep_state(struct device *d, int *p)
{
Index: linux-next/drivers/pci/pci.c
===================================================================
--- linux-next.orig/drivers/pci/pci.c
+++ linux-next/drivers/pci/pci.c
@@ -380,7 +380,8 @@ static struct pci_platform_pm_ops *pci_p
int pci_set_platform_pm(struct pci_platform_pm_ops *ops)
{
- if (!ops->is_manageable || !ops->set_state || !ops->choose_state)
+ if (!ops->is_manageable || !ops->set_state || !ops->choose_state
+ || !ops->sleep_wake || !ops->can_wakeup)
return -EINVAL;
pci_platform_pm = ops;
return 0;
@@ -403,6 +404,17 @@ static inline pci_power_t platform_pci_c
pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR;
}
+static inline bool platform_pci_can_wakeup(struct pci_dev *dev)
+{
+ return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false;
+}
+
+static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable)
+{
+ return pci_platform_pm ?
+ pci_platform_pm->sleep_wake(dev, enable) : -ENODEV;
+}
+
/**
* pci_raw_set_power_state - Use PCI PM registers to set the power state of
* given PCI device
@@ -1036,6 +1048,56 @@ int pci_set_pcie_reset_state(struct pci_
}
/**
+ * pci_pme_capable - check the capability of PCI device to generate PME#
+ * @dev: PCI device to handle.
+ * @pm: PCI PM capability offset of the device.
+ * @state: PCI state from which device will issue PME#.
+ */
+static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state)
+{
+ u16 pmc;
+
+ if (!pm)
+ return false;
+
+ /* Check device's ability to generate PME# from given state */
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
+
+ pmc &= PCI_PM_CAP_PME_MASK;
+ pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+
+ return !!(pmc & (1 << state));
+}
+
+/**
+ * pci_pme_active - enable or disable PCI device's PME# function
+ * @dev: PCI device to handle.
+ * @pm: PCI PM capability offset of the device.
+ * @enable: 'true' to enable PME# generation; 'false' to disable it.
+ *
+ * The caller must verify that the device is capable of generating PME# before
+ * calling this function with @enable equal to 'true'.
+ */
+static void pci_pme_active(struct pci_dev *dev, int pm, bool enable)
+{
+ u16 pmcsr;
+
+ if (!pm)
+ return;
+
+ pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+ /* Clear PME_Status by writing 1 to it and enable PME# */
+ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ if (!enable)
+ pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
+
+ pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr);
+
+ printk(KERN_INFO "PCI: PME# from device %s %s\n", pci_name(dev),
+ enable ? "enabled" : "disabled");
+}
+
+/**
* pci_enable_wake - enable PCI device as wakeup event source
* @dev: PCI device affected
* @state: PCI state from which device will issue wakeup events
@@ -1046,66 +1108,84 @@ int pci_set_pcie_reset_state(struct pci_
* called automatically by this routine.
*
* Devices with legacy power management (no standard PCI PM capabilities)
- * always require such platform hooks. Depending on the platform, devices
- * supporting the standard PCI PME# signal may require such platform hooks;
- * they always update bits in config space to allow PME# generation.
- *
- * -EIO is returned if the device can't ever be a wakeup event source.
- * -EINVAL is returned if the device can't generate wakeup events from
- * the specified PCI state. Returns zero if the operation is successful.
+ * always require such platform hooks.
+ *
+ * RETURN VALUE:
+ * 0 is returned on success
+ * -EINVAL is returned if device is not supposed to wake up the system
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable)
{
int pm;
- int status;
- u16 value;
+ int error = 0;
- /* Note that drivers should verify device_may_wakeup(&dev->dev)
- * before calling this function. Platform code should report
- * errors when drivers try to enable wakeup on devices that
- * can't issue wakeups, or on which wakeups were disabled by
- * userspace updating the /sys/devices.../power/wakeup file.
- */
+ if (!device_may_wakeup(&dev->dev))
+ return -EINVAL;
- status = call_platform_enable_wakeup(&dev->dev, enable);
+ if (enable && platform_pci_can_wakeup(dev)) {
+ error = platform_pci_sleep_wake(dev, true);
+ if (!error)
+ /*
+ * The platform claims to have handled the device and
+ * we have to trust it to avoid double wake-up events.
+ */
+ return 0;
+ }
- /* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* If device doesn't support PM Capabilities, but caller wants to
- * disable wake events, it's a NOP. Otherwise fail unless the
- * platform hooks handled this legacy device already.
- */
- if (!pm)
- return enable ? status : 0;
-
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev,pm+PCI_PM_PMC,&value);
-
- value &= PCI_PM_CAP_PME_MASK;
- value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
-
- /* Check if it can generate PME# from requested state. */
- if (!value || !(value & (1 << state))) {
- /* if it can't, revert what the platform hook changed,
- * always reporting the base "EINVAL, can't PME#" error
- */
+ if (!enable || pci_pme_capable(dev, pm, state)) {
+ pci_pme_active(dev, pm, enable);
if (enable)
- call_platform_enable_wakeup(&dev->dev, 0);
- return enable ? -EINVAL : 0;
+ return 0;
}
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
+ if (!enable && platform_pci_can_wakeup(dev))
+ error = platform_pci_sleep_wake(dev, false);
- /* Clear PME_Status by writing 1 to it and enable PME# */
- value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE;
+ return error;
+}
- if (!enable)
- value &= ~PCI_PM_CTRL_PME_ENABLE;
+/**
+ * pci_pm_init - Initialize PM functions of given PCI device
+ * @dev: PCI device to handle.
+ */
+void pci_pm_init(struct pci_dev *dev)
+{
+ int pm;
+ u16 pmc;
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
+ /* find PCI PM capability in list */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (!pm)
+ return;
+ /* Check device's ability to generate PME# */
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc);
- return 0;
+ if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
+ dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n",
+ pmc & PCI_PM_CAP_VER_MASK);
+ return;
+ }
+
+ if (pmc & PCI_PM_CAP_PME_MASK) {
+ dev_printk(KERN_INFO, &dev->dev,
+ "PME# supported from%s%s%s%s%s\n",
+ (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
+ (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
+ (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
+ (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
+ (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
+ /*
+ * Make device's PM flags reflect the wake-up capability, but
+ * let the user space enable it to wake up the system as needed.
+ */
+ device_set_wakeup_capable(&dev->dev, true);
+ device_set_wakeup_enable(&dev->dev, false);
+ /* Disable the PME# generation functionality */
+ pci_pme_active(dev, pm, false);
+ }
}
int
Index: linux-next/include/linux/pm_wakeup.h
===================================================================
--- linux-next.orig/include/linux/pm_wakeup.h
+++ linux-next/include/linux/pm_wakeup.h
@@ -35,6 +35,11 @@ static inline void device_init_wakeup(st
dev->power.can_wakeup = dev->power.should_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val)
+{
+ dev->power.can_wakeup = !!val;
+}
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -47,21 +52,7 @@ static inline void device_set_wakeup_ena
static inline int device_may_wakeup(struct device *dev)
{
- return dev->power.can_wakeup & dev->power.should_wakeup;
-}
-
-/*
- * Platform hook to activate device wakeup capability, if that's not already
- * handled by enable_irq_wake() etc.
- * Returns zero on success, else negative errno
- */
-extern int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- if (platform_enable_wakeup)
- return (*platform_enable_wakeup)(dev, is_on);
- return 0;
+ return dev->power.can_wakeup && dev->power.should_wakeup;
}
#else /* !CONFIG_PM */
@@ -80,11 +71,6 @@ static inline int device_can_wakeup(stru
#define device_set_wakeup_enable(dev, val) do {} while (0)
#define device_may_wakeup(dev) 0
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- return 0;
-}
-
#endif /* !CONFIG_PM */
#endif /* _LINUX_PM_WAKEUP_H */
Index: linux-next/drivers/base/power/sysfs.c
===================================================================
--- linux-next.orig/drivers/base/power/sysfs.c
+++ linux-next/drivers/base/power/sysfs.c
@@ -6,9 +6,6 @@
#include <linux/string.h>
#include "power.h"
-int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-
/*
* wakeup - Report/change current wakeup option for device
*
Index: linux-next/drivers/acpi/bus.c
===================================================================
--- linux-next.orig/drivers/acpi/bus.c
+++ linux-next/drivers/acpi/bus.c
@@ -306,6 +306,17 @@ bool acpi_bus_power_manageable(acpi_hand
EXPORT_SYMBOL(acpi_bus_power_manageable);
+bool acpi_bus_can_wakeup(acpi_handle handle)
+{
+ struct acpi_device *device;
+ int result;
+
+ result = acpi_bus_get_device(handle, &device);
+ return result ? false : device->wakeup.flags.valid;
+}
+
+EXPORT_SYMBOL(acpi_bus_can_wakeup);
+
/* --------------------------------------------------------------------------
Event Management
-------------------------------------------------------------------------- */
Index: linux-next/drivers/pci/probe.c
===================================================================
--- linux-next.orig/drivers/pci/probe.c
+++ linux-next/drivers/pci/probe.c
@@ -859,49 +859,6 @@ int pci_cfg_space_size_ext(struct pci_de
return PCI_CFG_SPACE_SIZE;
}
-/**
- * pci_disable_pme - Disable the PME function of PCI device
- * @dev: PCI device affected
- * -EINVAL is returned if PCI device doesn't support PME.
- * Zero is returned if the PME is supported and can be disabled.
- */
-static int pci_disable_pme(struct pci_dev *dev)
-{
- int pm;
- u16 value;
-
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* If device doesn't support PM Capabilities, it means that PME is
- * not supported.
- */
- if (!pm)
- return -EINVAL;
- /* Check device's ability to generate PME# */
- pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
-
- value &= PCI_PM_CAP_PME_MASK;
- /* Check if it can generate PME# */
- if (!value) {
- /*
- * If it is zero, it means that PME is still unsupported
- * although there exists the PM capability.
- */
- return -EINVAL;
- }
-
- pci_read_config_word(dev, pm + PCI_PM_CTRL, &value);
-
- /* Clear PME_Status by writing 1 to it */
- value |= PCI_PM_CTRL_PME_STATUS ;
- /* Disable PME enable bit */
- value &= ~PCI_PM_CTRL_PME_ENABLE;
- pci_write_config_word(dev, pm + PCI_PM_CTRL, value);
-
- return 0;
-}
-
int pci_cfg_space_size(struct pci_dev *dev)
{
int pos;
@@ -1009,7 +966,6 @@ static struct pci_dev *pci_scan_device(s
}
pci_vpd_pci22_init(dev);
- pci_disable_pme(dev);
return dev;
}
@@ -1030,6 +986,9 @@ void pci_device_add(struct pci_dev *dev,
/* Fix up broken headers */
pci_fixup_device(pci_fixup_header, dev);
+ /* Initialize power management of the device */
+ pci_pm_init(dev);
+
/*
* Add the device to our list of discovered devices
* and the bus list for fixup functions, etc.
Index: linux-next/drivers/acpi/glue.c
===================================================================
--- linux-next.orig/drivers/acpi/glue.c
+++ linux-next/drivers/acpi/glue.c
@@ -165,6 +165,8 @@ static int acpi_bind_one(struct device *
"firmware_node");
ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
"physical_node");
+ if (acpi_dev->wakeup.flags.valid)
+ device_set_wakeup_capable(dev, true);
}
return 0;
Index: linux-next/drivers/acpi/sleep/wakeup.c
===================================================================
--- linux-next.orig/drivers/acpi/sleep/wakeup.c
+++ linux-next/drivers/acpi/sleep/wakeup.c
@@ -66,12 +66,18 @@ void acpi_enable_wakeup_device(u8 sleep_
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
+ struct device *ldev;
+ bool wakeup_enabled;
+
if (!dev->wakeup.flags.valid)
continue;
+ ldev = acpi_get_physical_device(dev->handle);
+ wakeup_enabled = dev->wakeup.state.enabled ||
+ (ldev ? device_may_wakeup(ldev) : false);
/* If users want to disable run-wake GPE,
* we only disable it for wake and leave it for runtime
*/
- if (!dev->wakeup.state.enabled ||
+ if (!wakeup_enabled ||
sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
spin_unlock(&acpi_device_lock);
@@ -107,10 +113,15 @@ void acpi_disable_wakeup_device(u8 sleep
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
+ struct device *ldev;
+ bool wakeup_enabled;
if (!dev->wakeup.flags.valid)
continue;
- if (!dev->wakeup.state.enabled ||
+ ldev = acpi_get_physical_device(dev->handle);
+ wakeup_enabled = dev->wakeup.state.enabled ||
+ (ldev ? device_may_wakeup(ldev) : false);
+ if (!wakeup_enabled ||
sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
spin_unlock(&acpi_device_lock);
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
