Hi
...thanks for taking time out to help a newb!
@ Zhang Riu
> The temperature is gotten from somewhere in ec address space.
> And now it seems that the value returned is totally wrong.
> In order to see if EC is working correctly,
> will you please attach the full dmesg output after boot?
@ Len Brown
> It is possible that the EC is out to lunch.
> Do other EC things work, such as battery status?
Battery status works fine. I've attached dmesg.
@ Len Brown
> I recommend that you verify that you've got the latest BIOS.
@ Zhang Riu
> will you please check if there is any new BIOS released?
> A BIOS upgrade would be helpful.
I'm using the latest BIOS release from the HP website, which I installed the 2 weeks ago
after buying a new hard drive. (The previous one failed after 2 years I now know due to
heat damage).
However,
**I'm beginning to think though that I have quite simply a badly designed laptop!***
I did some digging on my Win xp to see if it's just a linux problem. Swiftfan could find no control over the fans,
and even the famous Everest Ultimate couldn't find an internal CPU temperature sensor, I think I might just
not have one?
...i.e. same problem on windows as linux, it seems. (Overheating is just as bad on either)
Sorry if anyone on this list works for HP, from my own experience and what I have heard I am greatly unimpressed by
their laptops. By locking users out of changing any but the most trivial settings in the BIOS I am unable to lower the
temperature trigger point for the fans and so correct their complete incompetence. I was clearly mistaken in thinking
them a good brand of laptop.
I called esupport to see if their BIOS could help any but I was advised that the best I could do would be to take my laptop
to a repair centre and get a bigger fan & heat sink installed.
Either that or a new motherboard, so I can get a reasonable BIOS? (Unbelievable to have to do that just for the sake
of simple BIOS settings. For what it's worth I'll complain to HP)
Thanks anyway,
LS
_________________________________________________________________
http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-18-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 19:28:38 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[ 0.000000] Command line: root=UUID=0820e513-7fa9-42f2-b9f2-1014d2a5e42d ro splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fea0000 (usable)
[ 0.000000] BIOS-e820: 000000003fea0000 - 000000003feac000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003feac000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261792) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7C40 checksum 0
[ 0.000000] ACPI: RSDP 000F7C40, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FEA3ED4, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FEABE3B, 0074 (r1 HP Piranha 6040000 ATI F4240)
[ 0.000000] ACPI: DSDT 3FEA3F08, 7F33 (r1 HP 309B 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEACFC0, 0040
[ 0.000000] ACPI: SSDT 3FEABEAF, 00CF (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3FEABF7E, 0046 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG 3FEABFC4, 003C (r1 HP PORSCHE 6040000 LOHR 0)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] CPU has 1 num_cores
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fea0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261792) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fea0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 261792
[ 0.000000] On node 0 totalpages: 261695
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1219 pages reserved
[ 0.000000] DMA zone: 2724 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3523 pages used for memmap
[ 0.000000] DMA32 zone: 254173 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256897
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=0820e513-7fa9-42f2-b9f2-1014d2a5e42d ro splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 10.456240] time.c: Detected 1790.830 MHz processor.
[ 10.457084] Console: colour VGA+ 80x25
[ 10.457088] console [tty0] enabled
[ 10.459864] Checking aperture...
[ 10.459908] CPU 0: aperture @ 52c000000 size 32 MB
[ 10.459953] Aperture too small (32 MB)
[ 10.471975] No AGP bridge found
[ 10.487309] Memory: 1019460k/1047168k available (2488k kernel code, 27320k reserved, 1319k data, 320k init)
[ 10.487410] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 10.566075] Calibrating delay using timer specific routine.. 3585.49 BogoMIPS (lpj=7170989)
[ 10.566203] Security Framework initialized
[ 10.566254] SELinux: Disabled at boot.
[ 10.566313] AppArmor: AppArmor initialized
[ 10.566360] Failure registering capabilities with primary security module.
[ 10.566513] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 10.567684] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 10.568280] Mount-cache hash table entries: 256
[ 10.568499] Initializing cgroup subsys ns
[ 10.568547] Initializing cgroup subsys cpuacct
[ 10.568604] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 10.568650] CPU: L2 Cache: 512K (64 bytes/line)
[ 10.568695] CPU 0/0 -> Node 0
[ 10.568764] SMP alternatives: switching to UP code
[ 10.569403] Freeing SMP alternatives: 24k freed
[ 10.569952] Early unpacking initramfs... done
[ 10.932858] ACPI: Core revision 20070126
[ 10.932975] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 11.612597] Using local APIC timer interrupts.
[ 11.668406] APIC timer calibration result 12436325
[ 11.668409] Detected 12.436 MHz APIC timer.
[ 11.668509] Brought up 1 CPUs
[ 11.668619] CPU0 attaching sched-domain:
[ 11.668622] domain 0: span 01
[ 11.668624] groups: 01
[ 11.668789] net_namespace: 120 bytes
[ 11.669262] Time: 18:06:54 Date: 06/20/08
[ 11.669340] NET: Registered protocol family 16
[ 11.669574] ACPI: bus type pci registered
[ 11.669695] PCI: Using configuration type 1
[ 11.670625] ACPI: EC: Look up EC in DSDT
[ 11.672347] ACPI: Interpreter enabled
[ 11.672393] ACPI: (supports S0 S3 S4 S5)
[ 11.672603] ACPI: Using IOAPIC for interrupt routing
[ 11.676759] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 11.720933] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
[ 11.720981] ACPI: EC: driver started in interrupt mode
[ 11.721060] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.722671] PCI: Transparent bridge - 0000:00:14.4
[ 11.722791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.722928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 11.723044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 11.723164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 11.724978] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 11.725343] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 11.725703] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 11.726062] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 11.726421] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 11.726782] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 11.727141] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 11.727500] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 11.727870] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.727945] pnp: PnP ACPI init
[ 11.727994] ACPI: bus type pnp registered
[ 11.748419] pnp: PnP ACPI: found 10 devices
[ 11.748466] ACPI: ACPI bus type pnp unregistered
[ 11.748737] PCI: Using ACPI for IRQ routing
[ 11.748782] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.748839] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
[ 11.748884] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
[ 11.760355] NET: Registered protocol family 8
[ 11.760399] NET: Registered protocol family 20
[ 11.760566] AppArmor: AppArmor Filesystem Enabled
[ 11.764333] Time: tsc clocksource has been installed.
[ 11.772356] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 11.772409] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 11.772461] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 11.772519] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 11.772566] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 11.772612] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 11.772658] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 11.772704] system 00:08: ioport range 0x870-0x87f has been reserved
[ 11.772750] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 11.772796] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 11.772842] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 11.772888] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 11.772934] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 11.772980] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 11.773026] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 11.773072] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 11.773118] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 11.773164] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 11.773210] system 00:08: ioport range 0x280-0x293 has been reserved
[ 11.773261] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 11.773308] system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 11.773360] system 00:09: iomem range 0x0-0xfff could not be reserved
[ 11.773786] PCI: Bridge: 0000:00:01.0
[ 11.773831] IO window: 9000-9fff
[ 11.773876] MEM window: c0100000-c01fffff
[ 11.773920] PREFETCH window: c8000000-cfffffff
[ 11.773965] PCI: Bridge: 0000:00:05.0
[ 11.774007] IO window: disabled.
[ 11.774051] MEM window: disabled.
[ 11.774095] PREFETCH window: disabled.
[ 11.774145] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 11.774189] IO window: 0000a400-0000a4ff
[ 11.774237] IO window: 0000a800-0000a8ff
[ 11.774284] PREFETCH window: 50000000-53ffffff
[ 11.774331] MEM window: 54000000-57ffffff
[ 11.774378] PCI: Bridge: 0000:00:14.4
[ 11.774422] IO window: a000-afff
[ 11.774470] MEM window: c0200000-c02fffff
[ 11.774516] PREFETCH window: disabled.
[ 11.774580] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 11.774612] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 11.774747] NET: Registered protocol family 2
[ 11.808374] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 11.808967] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 11.811259] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 11.812407] TCP: Hash tables configured (established 131072 bind 65536)
[ 11.812456] TCP reno registered
[ 11.824422] checking if image is initramfs... it is
[ 12.275629] Switched to high resolution mode on CPU 0
[ 12.538052] Freeing initrd memory: 7980k freed
[ 12.547439] audit: initializing netlink socket (disabled)
[ 12.547501] audit(1213985213.412:1): initialized
[ 12.549862] VFS: Disk quotas dquot_6.5.1
[ 12.549984] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 12.550175] io scheduler noop registered
[ 12.550219] io scheduler anticipatory registered
[ 12.550263] io scheduler deadline registered
[ 12.550405] io scheduler cfq registered (default)
[ 12.550456] PCI: MSI quirk detected. MSI deactivated.
[ 12.551129] Boot video device is 0000:01:05.0
[ 12.551346] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 12.551367] assign_interrupt_mode Found MSI capability
[ 12.551417] Allocate Port Service[0000:00:05.0:pcie00]
[ 12.578960] Real Time Clock Driver v1.12ac
[ 12.579105] Linux agpgart interface v0.102
[ 12.579165] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.579698] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 12.579792] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 12.580430] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.580547] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 12.580679] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 12.607572] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.607619] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.619135] mice: PS/2 mouse device common for all mice
[ 12.619211] cpuidle: using governor ladder
[ 12.619256] cpuidle: using governor menu
[ 12.619457] NET: Registered protocol family 1
[ 12.619605] registered taskstats version 1
[ 12.619779] Magic number: 12:476:140
[ 12.619945] hash matches device device:11
[ 12.620001] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 12.620054] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 12.620099] EDD information not available.
[ 12.620150] Freeing unused kernel memory: 320k freed
[ 12.647069] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 13.858482] fuse init (API version 7.9)
[ 13.880513] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 13.880521] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 13.882584] Marking TSC unstable due to TSC halts in idle
[ 13.885240] Time: acpi_pm clocksource has been installed.
[ 13.890852] ACPI Exception (thermal-0471): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 13.897404] ACPI: Thermal Zone [THRM] (0 C)
[ 14.649134] usbcore: registered new interface driver usbfs
[ 14.649157] usbcore: registered new interface driver hub
[ 14.658452] usbcore: registered new device driver usb
[ 14.669992] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 14.670056] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 14.670197] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 14.670463] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 14.670491] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
[ 14.696112] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.696121] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.728242] usb usb1: configuration #1 chosen from 1 choice
[ 14.728270] hub 1-0:1.0: USB hub found
[ 14.728282] hub 1-0:1.0: 4 ports detected
[ 14.814619] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 14.832051] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 14.832204] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 14.832286] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 14.832307] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
[ 14.891963] usb usb2: configuration #1 chosen from 1 choice
[ 14.891991] hub 2-0:1.0: USB hub found
[ 14.892002] hub 2-0:1.0: 4 ports detected
[ 14.995907] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 14.996058] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 14.996127] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 14.996188] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
[ 15.007667] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.007793] usb usb3: configuration #1 chosen from 1 choice
[ 15.007822] hub 3-0:1.0: USB hub found
[ 15.007830] hub 3-0:1.0: 8 ports detected
[ 15.111733] ATIIXP: IDE controller (0x1002:0x4376 rev 0x00) at PCI slot 0000:00:14.1
[ 15.111758] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.111769] ATIIXP: not 100% native mode: will probe irqs later
[ 15.111779] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 15.111795] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 15.111806] Probing IDE interface ide0...
[ 16.070519] hda: ST9160821A, ATA DISK drive
[ 16.070559] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 16.072310] hda: UDMA/100 mode selected
[ 16.072566] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 16.100849] Probing IDE interface ide1...
[ 17.168922] hdc: HL-DT-ST DVDRAM GSA-4082N, ATAPI CD/DVD-ROM drive
[ 17.168963] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 17.170000] hdc: MWDMA2 mode selected
[ 17.170527] ide1 at 0x170-0x177,0x376 on irq 15
[ 17.182287] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 17.184844] SCSI subsystem initialized
[ 17.193836] libata version 3.00 loaded.
[ 17.240458] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[ 17.240844] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 17.240847] 8139cp 0000:06:06.0: Try the "8139too" driver instead.
[ 17.243557] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 23 (level, low) -> IRQ 23
[ 17.293722] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[c0209000-c02097ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 17.306927] 8139too Fast Ethernet driver 0.9.28
[ 17.311647] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 17.312853] eth0: RealTek RTL8139 at 0xa000, 00:0f:b0:c7:27:ee, IRQ 22
[ 17.312856] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 17.327549] hda: max request size: 512KiB
[ 17.328918] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 17.331070] hda: cache flushes supported
[ 17.331107] hda: hda1 hda2 hda3
[ 17.416101] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 17.416112] Uniform CD-ROM driver Revision: 3.20
[ 17.814564] Attempting manual resume
[ 17.814569] swsusp: Resume From Partition 3:2
[ 17.814571] PM: Checking swsusp image.
[ 17.814768] PM: Resume from disk failed.
[ 17.852540] kjournald starting. Commit interval 5 seconds
[ 17.852557] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.436573] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 28.504081] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.701078] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 28.772479] input: Power Button (FF) as /devices/virtual/input/input2
[ 28.787501] ACPI: Power Button (FF) [PWRF]
[ 28.787645] input: Sleep Button (FF) as /devices/virtual/input/input3
[ 28.800372] ACPI: Sleep Button (FF) [SLPF]
[ 28.800503] input: Lid Switch as /devices/virtual/input/input4
[ 28.800590] ACPI: Lid Switch [LID]
[ 28.800651] input: Power Button (CM) as /devices/virtual/input/input5
[ 28.815469] ACPI: Power Button (CM) [PWRB]
[ 29.016522] ACPI: WMI-Acer: Mapper loaded
[ 29.404503] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 29.726184] [fglrx] Maximum main memory to use for locked dma buffers: 921 MBytes.
[ 29.726221] [fglrx] ASYNCIO init succeed!
[ 29.726381] [fglrx] PAT is enabled successfully!
[ 29.728143] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 29.808432] ACPI: AC Adapter [ACAD] (on-line)
[ 30.013765] ACPI: Battery Slot [BAT1] (battery absent)
[ 30.351166] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input6
[ 30.365192] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 31.516515] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 31.631427] Yenta: CardBus bridge found at 0000:06:04.0 [103c:30a4]
[ 31.631455] Yenta: Enabling burst memory read transactions
[ 31.631461] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 31.631463] Yenta: Routing CardBus interrupts to ISA
[ 31.631469] Yenta TI: socket 0000:06:04.0, mfunc 0x00a61b22, devctl 0x64
[ 31.863823] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 31.863830] Socket status: 30000006
[ 31.863834] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 31.863837] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 31.877003] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 31.948590] sdhci: Secure Digital Host Controller Interface driver
[ 31.948596] sdhci: Copyright(c) Pierre Ossman
[ 32.709818] b43-phy0: Broadcom 4318 WLAN found
[ 32.783715] phy0: Selected rate control algorithm 'simple'
[ 32.877479] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 32.949439] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 33.066504] ttySHSF0 at MMIO 0x0 (irq = 17) is a Conexant HSF softmodem (PCI-1002:4378-103c:30a4)
[ 33.069327] ACPI: PCI Interrupt 0000:06:04.3[B] -> GSI 23 (level, low) -> IRQ 23
[ 33.069490] sdhci: SDHCI controller found at 0000:06:04.4 [104c:8034] (rev 0)
[ 33.069511] ACPI: PCI Interrupt 0000:06:04.4[A] -> GSI 20 (level, low) -> IRQ 20
[ 33.069633] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 33.069728] mmc0: SDHCI at 0xc020a000 irq 20 DMA
[ 33.069811] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 33.069890] mmc1: SDHCI at 0xc0209c00 irq 20 DMA
[ 33.069972] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 33.070055] mmc2: SDHCI at 0xc0209800 irq 20 DMA
[ 33.125064] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 35.705487] lp: driver loaded but no devices found
[ 36.008303] Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 across:996020k
[ 114.885355] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 114.890003] EXT3 FS on hda3, internal journal
[ 115.017573] device-mapper: uevent: version 1.0.3
[ 115.017606] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
[ 116.591783] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 117.170991] No dock devices found.
[ 117.577955] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-32 processors (1 cpu cores) (version 2.20.00)
[ 117.578000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4
[ 117.578003] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6
[ 117.578005] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16
[ 117.578047] powernow-k8: ph2 null fid transition 0xa
[ 119.526923] eth0: link up, 10Mbps, half-duplex, lpa 0x0000
[ 119.585007] input: b43-phy0 as /devices/virtual/input/input9
[ 120.914837] Registered led device: b43-phy0:radio
[ 121.211692] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 122.800256] [fglrx] GART Table is not in FRAME_BUFFER range
[ 122.800271] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
[ 122.800274] [fglrx] Reserve Block - 1 offset = 0X7ff5000 length = 0Xb000
[ 122.931998] [fglrx] interrupt source 20008000 successfully enabled
[ 122.932006] [fglrx] enable ID = 0x00000004
[ 122.932016] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 123.293331] NET: Registered protocol family 17
[ 123.419432] Clocksource tsc unstable (delta = -189673346 ns)
[ 125.411390] NET: Registered protocol family 10
[ 125.411761] lo: Disabled Privacy Extensions
[ 125.412644] ADDRCONF(NETDEV_UP): wlan0: link is not ready
