On Tuesday 13 May 2008, Matthew Garrett wrote:
> If a thermal zone is provided with a critical temperature, then there is
> obviously a concern on the part of the vendor that it may overheat.
> Currently Linux will only attempt to do something about that if the
> vendor has explicitly added a passive cooling trip point. However, it's
> clear that allowing the system to hit the critical trip point is far
> from ideal - the system will immediately shut down, and data will almost
> certainly be lost. This patch adds a default passive cooling zone if the
> platform does not provide its own, with the default being to have it be
> 5 degrees below the critical shutoff temperature. This should avoid the
> kernel limiting performance unless it's genuinely likely that the
> hardware is about to overheat and shut down. The default temperature
> value can be overridden by passing the thermal.psv argument at boot or
> module load time.
>
> Signed-off-by: Matthew Garrett <mjg@xxxxxxxxxx>
>
> ---
>
> While this is clearly something of a hack,
Yes, I'm aware of the Dell D610, and I'm truly sorry
that Dell built a machine with a poor thermal solution,
didn't supply _PSV, and somehow looked after Windows
without looking after Linux.
But I'm not willing to screw up Linux for the
benefit of an obsolete screwed up Dell laptop.
An entire new handheld product line will ship this year
where the assumption that the processor is the primary
contributor to heat may simply be _false_, thermal
zones may be totally unrelated to the processor,
and throttling the processor may be exactly the
wrong way to handle a thermal issue.
I'm sorry for D610 owners running Linux, really I am.
-Len
> I'd argue that it's the right
> thing to do. In the real world, it's highly unlikely that a piece of
> ahrdware is going to reach equilibrium at 5 degrees below the critical
> temperature. If we've reached that temperature, the machine is in
> serious danger of powering down in the near future and we really ought
> to do something about it.
>
> This patch associates the CPUs with the zone even if the zone may be
> relating to an entirely different part of the hardware. This is a
> pragmatic decision - right now the CPUs are the only hardware we really
> have any thermal control over, and even if the thermal zone is covering
> the GPU (for instance) then the only thing we can do to reduce the heat
> is to reduce the load on the CPU. I think this is certainly better than
> letting the machine power down.
>
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index 93cb3e8..19acfd3 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -116,6 +116,8 @@ static const struct acpi_device_id thermal_device_ids[] = {
> };
> MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
>
> +extern struct acpi_handle_list acpi_processor_list;
> +
> static struct acpi_driver acpi_thermal_driver = {
> .name = "thermal",
> .class = ACPI_THERMAL_CLASS,
> @@ -418,9 +420,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
> "_PSV", NULL, &tz->trips.passive.temperature);
> }
>
> - if (ACPI_FAILURE(status))
> - tz->trips.passive.flags.valid = 0;
> - else {
> + if (ACPI_SUCCESS(status)) {
> tz->trips.passive.flags.valid = 1;
> if (flag == ACPI_TRIPS_INIT) {
> status = acpi_evaluate_integer(
> @@ -440,20 +440,48 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
> tz->trips.passive.flags.valid = 0;
> }
> }
> +
> + if (!tz->trips.passive.flags.valid) {
> + /* If there's no valid passive zone, add a fake
> + one in order to ensure that we don't hit the
> + critical temperature limit */
> +
> + tz->trips.passive.flags.valid = 1;
> + tz->trips.passive.tc1 = 1;
> + tz->trips.passive.tc2 = 1;
> +
> + /* A high rate of polling here is acceptable -
> + if we're hitting this limit, then the
> + system is clearly under load. A higher
> + polling frequency means that we can weigh
> + the load against the temperature more
> + effeciently and overall reduce power
> + consumption */
> +
> + tz->trips.passive.tsp = 10;
> +
> + /* Set the passive trip temperature to be either
> + the option passed by the user or 5 degrees below the
> + critical temperature. That should give us enough
> + head room without limiting performance */
> +
> + if (!psv)
> + tz->trips.passive.temperature =
> + tz->trips.critical.temperature - 50;
> + }
> }
> if ((flag & ACPI_TRIPS_DEVICES) && tz->trips.passive.flags.valid) {
> memset(&devices, 0, sizeof(struct acpi_handle_list));
> status = acpi_evaluate_reference(tz->device->handle, "_PSL",
> NULL, &devices);
> - if (ACPI_FAILURE(status))
> - tz->trips.passive.flags.valid = 0;
> - else
> - tz->trips.passive.flags.valid = 1;
> -
> - if (memcmp(&tz->trips.passive.devices, &devices,
> + if (ACPI_FAILURE(status)) {
> + memcpy(&tz->trips.passive.devices,
> + &acpi_processor_list,
> + sizeof (struct acpi_handle_list));
> + } else if (memcmp(&tz->trips.passive.devices, &devices,
> sizeof(struct acpi_handle_list))) {
> memcpy(&tz->trips.passive.devices, &devices,
> - sizeof(struct acpi_handle_list));
> + sizeof(struct acpi_handle_list));
> ACPI_THERMAL_TRIPS_EXCEPTION(flag, "device");
> }
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
