在 2025/1/15 23:51, Rafael J. Wysocki 写道:
On Wed, Jan 15, 2025 at 1:38 PM Xiaofei Tan <tanxiaofei@xxxxxxxxxx> wrote:
When the module HED is built-in, the init order is determined by
Makefile order. That order violates expectations. Because the module
HED init is behind evged. RAS records can't be handled in the
special time window that evged has initialized while HED not.
If the number of such RAS records is more than the APEI HEST error
source number, the HEST resources could be occupied all, and then
could affect subsequent RAS error reporting.
If build HED as a module, the problem remains. To solve this problem
completely, change the ACPI_HED from tristate to bool.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
---
drivers/acpi/Kconfig | 2 +-
drivers/acpi/Makefile | 8 +++++++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index d81b55f5068c..7f10aa38269d 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -452,7 +452,7 @@ config ACPI_SBS
the modules will be called sbs and sbshc.
config ACPI_HED
- tristate "Hardware Error Device"
+ bool "Hardware Error Device"
help
This driver supports the Hardware Error Device (PNP0C33),
which is used to report some hardware errors notified via
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 40208a0f5dfb..b50d1baeb71f 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -15,6 +15,13 @@ endif
obj-$(CONFIG_ACPI) += tables.o
+#
+# The hed.o needs to be in front of evged.o to avoid the problem that
+# RAS errors cannot be handled in the special time window of startup
+# phase that evged has initialized while hed not.
+#
+obj-$(CONFIG_ACPI_HED) += hed.o
+
I'm not sure why you are insisting on this Makefile ordering change.
It would be much more robust to run the hed driver init at a different
initcall level than evged.
If there is a problem with this approach, it needs to be mentioned in
the changelog or in the comment above.
Hi Rafael，
The approach of changing the initcall level can work too. Will send v3 patch later, thanks.
#
# ACPI Core Subsystem (Interpreter)
#
@@ -95,7 +102,6 @@ obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_SBS) += sbshc.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
-obj-$(CONFIG_ACPI_HED) += hed.o
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
--
.
