Extend the usb-switch binding to support DisplayPort (DP) alternate
modes. A third port for the DP signal is necessary when a mode-switch is
muxing USB and DP together onto a usb type-c connector. Add data-lanes
to the usbc output node to allow a device using this binding to remap
the data lanes on the output. Add an example to show how this new port
can be used.
Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Benson Leung <bleung@xxxxxxxxxxxx>
Cc: Guenter Roeck <groeck@xxxxxxxxxxxx>
Cc: Prashant Malani <pmalani@xxxxxxxxxxxx>
Cc: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
Cc: <devicetree@xxxxxxxxxxxxxxx>
Cc: <chrome-platform@xxxxxxxxxxxxxxx>
Cc: Pin-yen Lin <treapking@xxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
.../devicetree/bindings/usb/usb-switch.yaml | 89 +++++++++++++++++++
1 file changed, 89 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml
index f5dc7e23b134..816f295f322f 100644
--- a/Documentation/devicetree/bindings/usb/usb-switch.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml
@@ -52,6 +52,14 @@ properties:
endpoint:
$ref: '#/$defs/usbc-in-endpoint'
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+ properties:
+ endpoint:
+ $ref: '#/$defs/dp-endpoint'
+
oneOf:
- required:
- port
@@ -65,6 +73,19 @@ $defs:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
description: Super Speed (SS) output endpoint to a type-c connector
unevaluatedProperties: false
+ properties:
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ An array of physical USB Type-C data lane indexes.
+ - 0 is SSRX1 lane
+ - 1 is SSTX1 lane
+ - 2 is SSTX2 lane
+ - 3 is SSRX2 lane
+ minItems: 4
+ maxItems: 4
+ items:
+ maximum: 3
usbc-in-endpoint:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
@@ -79,7 +100,75 @@ $defs:
items:
maximum: 8
+ dp-endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ description: DisplayPort (DP) input from the DP PHY
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ An array of physical DP data lane indexes
+ - 0 is DP ML0 lane
+ - 1 is DP ML1 lane
+ - 2 is DP ML2 lane
+ - 3 is DP ML3 lane
+ oneOf:
+ - items:
+ - const: 0
+ - const: 1
+ - items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+
examples:
+ # A USB + DP mode and orientation switch which muxes DP altmode
+ # and USB onto a usb-c-connector node.
+ - |
+ device {
+ mode-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint {
+ remote-endpoint = <&usb_c_connector>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint {
+ remote-endpoint = <&usb_ss_phy>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint {
+ remote-endpoint = <&dp_phy>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+
# A USB orientation switch which flips the pin orientation
# for a usb-c-connector node.
- |
--
https://chromeos.dev
