This series adds support for the below ECR approved by ASWG. 1) MADT - https://drive.google.com/file/d/1oMGPyOD58JaPgMl1pKasT-VKsIKia7zR/view?usp=sharing The series primarily enables irqchip drivers for RISC-V ACPI based platforms. The series can be broadly categorized like below. 1) PCI ACPI related functions are migrated from arm64 to common file so that we don't need to duplicate them for RISC-V. 2) Added support for re-ordering the probe of interrupt controllers when IRQCHIP_ACPI_DECLARE is used. 3) To ensure probe order between interrupt controllers and devices, implicit dependency is created similar to when _DEP is present. 4) ACPI support added in RISC-V interrupt controller drivers. Changes since v7: 1) Updated commit messages as per feedback from Bjorn on patches 2, 3 and 8. 2) Addressed Anup Patel's comments. 3) Added Tested-by tag from Björn Töpe which I missed to add in previous version. 4) Rebased to 6.11-rc3 and updated the RB tags from Anup. Changes since v6: 1) Update to commit message/code comments as per feedback from Bjorn. 2) Rebased to 6.11-rc1. Changes since v5: 1) Addressed feedback from Thomas. 2) Created separate patch for refactoring DT code in IMSIC 3) Separated a fix in riscv-intc irqchip driver and sent separately. This series depends on that patch [1]. 4) Dropped serial driver patch since it depends on Andy's refactoring series [2]. RISC-V patches will be sent separately later once Andy series get accepted. 5) Rebased to v6.10-rc1 which has AIA DT patches. 6) Updated tags. Changes since RFC v4: 1) Removed RFC tag as the RFCv4 design looked reasonable. 2) Dropped PCI patch needed to avoid warning when there is no MSI controller. This will be sent later separately after the current series. 3) Dropped PNP handling of _DEP since there is new ACPI ID for generic 16550 UART. Added the serial driver patch instead. 4) Rebased to latest linux-next. 5) Reordered/squashed patches in the series Changes since RFC v3: 1) Moved to _DEP method instead of fw_devlink. 2) PLIC/APLIC driver probe using namespace devices. 3) Handling PNP devices as part of clearing dependency. 4) Rebased to latest linux-next to get AIA DT drivers. Changes since RFC v2: 1) Introduced fw_devlink for ACPI nodes for IRQ dependency. 2) Dropped patches in drivers which are not required due to fw_devlink support. 3) Dropped pci_set_msi() patch and added a patch in pci_create_root_bus(). 4) Updated pnp_irq() patch so that none of the actual PNP drivers need to change. Changes since RFC v1: 1) Abandoned swnode approach as per Marc's feedback. 2) To cope up with AIA series changes which changed irqchip driver probe from core_initcall() to platform_driver, added patches to support deferred probing. 3) Rebased on top of Anup's AIA v11 and added tags. To test the series, 1) qemu should be built using the latest master branch. 2) EDK2 should be built using the instructions at: https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md NOTE: One should be able to use u-boot as well as per instructions from Björn. https://lore.kernel.org/lkml/87a5lqsrvh.fsf@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ 3) Build Linux using this series (+ serial driver patches which are already in linux-next). aia_b2_v8 branch in https://github.com/vlsunil/linux.git all these patches. Run Qemu: qemu-system-riscv64 \ -M virt,pflash0=pflash0,pflash1=pflash1,aia=aplic-imsic \ -m 2G -smp 8 \ -serial mon:stdio \ -device virtio-gpu-pci -full-screen \ -device qemu-xhci \ -device usb-kbd \ -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \ -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \ -netdev user,id=net0 -device virtio-net-pci,netdev=net0 \ -kernel arch/riscv/boot/Image \ -initrd rootfs.cpio \ -append "root=/dev/ram ro console=ttyS0 rootwait earlycon=sbi" To boot with APLIC only, use aia=aplic. To boot with PLIC, remove aia= option. Sunil V L (17): arm64: PCI: Migrate ACPI related functions to pci-acpi.c ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe ACPI: bus: Add acpi_riscv_init() function ACPI: scan: Refactor dependency creation ACPI: scan: Add RISC-V interrupt controllers to honor list ACPI: scan: Define weak function to populate dependencies ACPI: bus: Add RINTC IRQ model for RISC-V ACPI: pci_link: Clear the dependencies after probe ACPI: RISC-V: Implement PCI related functionality ACPI: RISC-V: Implement function to reorder irqchip probe entries ACPI: RISC-V: Initialize GSI mapping structures ACPI: RISC-V: Implement function to add implicit dependencies irqchip/riscv-intc: Add ACPI support for AIA irqchip/riscv-imsic-state: Create separate function for DT irqchip/riscv-imsic: Add ACPI support irqchip/riscv-aplic: Add ACPI support irqchip/sifive-plic: Add ACPI support arch/arm64/kernel/pci.c | 191 ------------ arch/riscv/Kconfig | 2 + arch/riscv/include/asm/irq.h | 55 ++++ arch/riscv/kernel/acpi.c | 33 +- drivers/acpi/bus.c | 4 + drivers/acpi/pci_link.c | 2 + drivers/acpi/riscv/Makefile | 2 +- drivers/acpi/riscv/init.c | 13 + drivers/acpi/riscv/init.h | 4 + drivers/acpi/riscv/irq.c | 335 +++++++++++++++++++++ drivers/acpi/scan.c | 103 ++++--- drivers/irqchip/irq-riscv-aplic-direct.c | 22 +- drivers/irqchip/irq-riscv-aplic-main.c | 69 +++-- drivers/irqchip/irq-riscv-aplic-main.h | 1 + drivers/irqchip/irq-riscv-aplic-msi.c | 9 +- drivers/irqchip/irq-riscv-imsic-early.c | 64 +++- drivers/irqchip/irq-riscv-imsic-platform.c | 32 +- drivers/irqchip/irq-riscv-imsic-state.c | 160 +++++----- drivers/irqchip/irq-riscv-imsic-state.h | 2 +- drivers/irqchip/irq-riscv-intc.c | 90 ++++++ drivers/irqchip/irq-sifive-plic.c | 95 ++++-- drivers/pci/pci-acpi.c | 182 +++++++++++ include/acpi/acpi_bus.h | 2 + include/linux/acpi.h | 9 + include/linux/irqchip/riscv-imsic.h | 9 + 25 files changed, 1113 insertions(+), 377 deletions(-) create mode 100644 drivers/acpi/riscv/init.c create mode 100644 drivers/acpi/riscv/init.h create mode 100644 drivers/acpi/riscv/irq.c -- 2.43.0
