Re: [PATCH 6/7] x86/hyperv: Reserve real mode when ACPI wakeup mailbox is available

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 06 2024 at 15:12, Yunhong Jiang wrote:
> +static void __init hv_reserve_real_mode(void)
> +{
> +	phys_addr_t mem;
> +	size_t size = real_mode_size_needed();
> +
> +	/*
> +	 * We only need the memory to be <4GB since the 64-bit trampoline goes
> +	 * down to 32-bit mode.
> +	 */
> +	mem = memblock_phys_alloc_range(size, PAGE_SIZE, 0, SZ_4G);
> +	if (!mem)
> +		panic("No sub-4G memory is available for the trampoline\n");
> +	set_real_mode_mem(mem);
> +}

We really don't need another copy of reserve_real_mode(). See uncompiled
patch below. It does not panic when the allocation fails, but why do you
want to panic in that case? If it's not there then the system boots with
a single CPU, so what.

>  void __init hv_vtl_init_platform(void)
>  {
>  	pr_info("Linux runs in Hyper-V Virtual Trust Level\n");
>  
>  	if (wakeup_mailbox_addr) {
>  		x86_platform.hyper.is_private_mmio = hv_is_private_mmio_tdx;
> +		x86_platform.realmode_reserve = hv_reserve_real_mode;
>  	} else {
>  		x86_platform.realmode_reserve = x86_init_noop;
>  		x86_platform.realmode_init = x86_init_noop;
> @@ -259,7 +276,8 @@ int __init hv_vtl_early_init(void)
>  		panic("XSAVE has to be disabled as it is not supported by this module.\n"
>  			  "Please add 'noxsave' to the kernel command line.\n");
>  
> -	real_mode_header = &hv_vtl_real_mode_header;
> +	if (!wakeup_mailbox_addr)
> +		real_mode_header = &hv_vtl_real_mode_header;

Why is that not suffient to be done in hv_vtl_init_platform() inside the
condition which clears x86_platform.realmode_reserve/init?

x86_platform.realmode_init() is invoked from an early initcall while
hv_vtl_init_platform() is called during early boot.

Thanks,

        tglx
---
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -31,12 +31,18 @@ struct x86_init_mpparse {
  *				platform
  * @memory_setup:		platform specific memory setup
  * @dmi_setup:			platform specific DMI setup
+ * @realmode_limit:		platform specific address limit for the realmode trampoline
+ *				(default 1M)
+ * @reserve_bios:		platform specific address limit for reserving the BIOS area
+ *				(default 1M)
  */
 struct x86_init_resources {
 	void (*probe_roms)(void);
 	void (*reserve_resources)(void);
 	char *(*memory_setup)(void);
 	void (*dmi_setup)(void);
+	unsigned long realmode_limit;
+	unsigned long reserve_bios;
 };
 
 /**
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -8,6 +8,7 @@
 #include <linux/ioport.h>
 #include <linux/export.h>
 #include <linux/pci.h>
+#include <linux/sizes.h>
 
 #include <asm/acpi.h>
 #include <asm/bios_ebda.h>
@@ -68,6 +69,8 @@ struct x86_init_ops x86_init __initdata
 		.reserve_resources	= reserve_standard_io_resources,
 		.memory_setup		= e820__memory_setup_default,
 		.dmi_setup		= dmi_setup,
+		.realmode_limit		= SZ_1M,
+		.reserve_bios		= SZ_1M,
 	},
 
 	.mpparse = {
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -45,7 +45,7 @@ void load_trampoline_pgtable(void)
 
 void __init reserve_real_mode(void)
 {
-	phys_addr_t mem;
+	phys_addr_t mem, limit = x86_init.resources.realmode_limit;
 	size_t size = real_mode_size_needed();
 
 	if (!size)
@@ -54,17 +54,15 @@ void __init reserve_real_mode(void)
 	WARN_ON(slab_is_available());
 
 	/* Has to be under 1M so we can execute real-mode AP code. */
-	mem = memblock_phys_alloc_range(size, PAGE_SIZE, 0, 1<<20);
+	mem = memblock_phys_alloc_range(size, PAGE_SIZE, 0, limit);
 	if (!mem)
-		pr_info("No sub-1M memory is available for the trampoline\n");
+		pr_info("No memory below %lluM for the real-mode trampoline\n", limit >> 20);
 	else
 		set_real_mode_mem(mem);
 
-	/*
-	 * Unconditionally reserve the entire first 1M, see comment in
-	 * setup_arch().
-	 */
-	memblock_reserve(0, SZ_1M);
+	/* Reserve the entire first 1M, if enabled. See comment in setup_arch(). */
+	if (x86_init.resources.reserve_bios)
+		memblock_reserve(0, x86_init.resources.reserve_bios);
 }
 
 static void __init sme_sev_setup_real_mode(struct trampoline_header *th)




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux