On Fri, May 10, 2024 at 06:52:41PM +0200, Armin Wolf wrote: > Am 10.05.24 um 18:41 schrieb Rafael J. Wysocki: > > On Fri, May 10, 2024 at 6:10 PM Armin Wolf <W_Armin@xxxxxx> wrote: > > > Am 10.05.24 um 16:03 schrieb Rafael J. Wysocki: > > > > > > > From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx> > > > > > > > > It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo > > > > IdeaPad Pro 5 due to a missing address space handler for the EC address > > > > space: > > > > > > > > ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130) > > > > > > > > This happens because the EC driver only registers the EC address space > > > > handler for operation regions defined in the EC device scope of the > > > > ACPI namespace while the operation region being accessed by the _DSM > > > > in question is located beyond that scope. > > > > > > > > To address this, modify the ACPI EC driver to install the EC address > > > > space handler at the root of the ACPI namespace. > > > > > > > > Note that this change is consistent with some examples in the ACPI > > > > specification in which EC operation regions located outside the EC > > > > device scope are used (for example, see Section 9.17.15 in ACPI 6.5), > > > > so the current behavior of the EC driver is arguably questionable. > > > Hi, > > > > > > the patch itself looks good to me, but i wonder what happens if multiple > > > ACPI EC devices are present. How would we handle such a situation? > > I'm wondering if this is a theoretical question or do you have any > > existing or planned systems in mind? > > > > ec_read(), ec_write() and ec_transaction() use only the first EC that > > has been found anyway. > > Its a theoretical question, i do not know of any systems which have more than > one ACPI EC device. The specification is clear about this case in the "ACPI Embedded Controller Interface Specification": "The ACPI standard supports multiple embedded controllers in a system, each with its own resources. Each embedded controller has a flat byte-addressable I/O space, currently defined as 256 bytes." However, I haven't checked deeper, so it might be a leftover in the documentation. The OperationRegion() has no reference to the EC (or in general, device) which we need to speak to. The only possibility to declare OpRegion() for the second+ EC is to use vendor specific RegionSpace, AFAIU. So, even if ACPI specification supports 2+ ECs, it doesn't support OpRegion():s for them under the same RegionSpace. That said, the commit message might be extended to summarize this, but at the same time I see no way how this series can break anything even in 2+ ECs environments. > This patch would prevent any ACPI ECs other than the first one from probing, > since they would fail to register their address space handler. > I am just curious if/how we want to handle such situations. -- With Best Regards, Andy Shevchenko
