This patch series enable RISC-V ACPI NUMA support which was based on the recently approved ACPI ECR[1]. Patch 1/6 is generated from the acpica PR[2] and should be merged through the acpica project. Due to this dependency, other 5 patches can only be merged after the corresponding ACPICA patch was pulled into linux. Patch 2/6 add RISC-V specific acpi_numa.c file to parse NUMA information from SRAT and SLIT ACPI tables. Patch 3/6 add the common SRAT RINTC affinity structure handler. Patch 4/6 remove the '#if defined(CONFIG_ARCH)' condition to make some NUMA related parse functions common for all current architectures that support ACPI_NUMA. Patch 5/6 change the ACPI_NUMA to a hidden option since it would be selected by default on all supported platform. Patch 6/6 replace pr_info with pr_debug in arch_acpi_numa_init() to avoid potential boot noise on ACPI platforms that are not NUMA. Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next [1] https://drive.google.com/file/d/1YTdDx2IPm5IeZjAW932EYU-tUtgS08tX/view?usp=sharing [2] https://github.com/acpica/acpica/pull/926 Testing: Since the ACPI AIA/PLIC support patch set is still under upstream review, hence it is tested using the poll based HVC SBI console and RAM disk. 1) Build latest Qemu with the following patch backported https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0 2) Build latest EDK-II https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md 3) Build Linux with the following configs enabled CONFIG_RISCV_SBI_V01=y CONFIG_SERIAL_EARLYCON_RISCV_SBI=y CONFIG_NONPORTABLE=y CONFIG_HVC_RISCV_SBI=y CONFIG_NUMA=y CONFIG_ACPI_NUMA=y 4) Build buildroot rootfs.cpio 5) Launch the Qemu machine qemu-system-riscv64 -nographic \ -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \ -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \ -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \ -object memory-backend-ram,size=4G,id=m0 \ -object memory-backend-ram,size=4G,id=m1 \ -numa node,memdev=m0,cpus=0-1,nodeid=0 \ -numa node,memdev=m1,cpus=2-3,nodeid=1 \ -numa dist,src=0,dst=1,val=30 \ -kernel linux/arch/riscv/boot/Image \ -initrd buildroot/output/images/rootfs.cpio \ -append "root=/dev/ram ro console=hvc0 earlycon=sbi" [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff] [ 0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff] ... [ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0 [ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0 [ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1 [ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1 --- Changes since v2 - Rebase to Linux 6.9-rc1 - changed ACPI_NUMA to a hidden option in patch 5/6 per Arnd's suggestion - Removed original 6/6 which was not needed with changes in patch 5/6 - Added a new patch 6/6 to replace pr_info to pr_debug in arch_acpi_numa_init Haibo Xu (6): ACPICA: SRAT: Add RISC-V RINTC affinity structure ACPI: RISCV: Add NUMA support based on SRAT and SLIT ACPI: NUMA: Add handler for SRAT RINTC affinity structure ACPI: NUMA: Make some NUMA related parse functions common ACPI: NUMA: change the ACPI_NUMA to a hidden option ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init arch/arm64/Kconfig | 1 - arch/loongarch/Kconfig | 1 - arch/riscv/include/asm/acpi.h | 15 +++- arch/riscv/kernel/Makefile | 1 + arch/riscv/kernel/acpi.c | 5 -- arch/riscv/kernel/acpi_numa.c | 131 ++++++++++++++++++++++++++++++++++ arch/riscv/kernel/setup.c | 4 +- arch/riscv/kernel/smpboot.c | 2 - drivers/acpi/numa/Kconfig | 5 +- drivers/acpi/numa/srat.c | 40 ++++++++--- drivers/base/arch_numa.c | 2 +- include/acpi/actbl3.h | 18 ++++- include/linux/acpi.h | 6 ++ 13 files changed, 204 insertions(+), 27 deletions(-) create mode 100644 arch/riscv/kernel/acpi_numa.c -- 2.34.1
