Hi Sunil, Could you help review this patch set? Thanks, Haibo On Wed, Jan 31, 2024 at 10:18 AM Haibo Xu <haibo1.xu@xxxxxxxxx> wrote: > > This patch series enable RISC-V ACPI NUMA support which was based on > the recently approved ACPI ECR[1]. > > Patch 1/4 is generated from the acpica PR[2] and should be merged through > the acpica project. Due to this dependency, other 3 patches can only be > merged after the corresponding ACPICA patch was pulled into linux. > > Patch 2/4 add the common SRAT RINTC affinity structure handler. > Patch 3/4 add RISC-V specific acpi_numa.c file to parse NUMA information > from SRAT and SLIT ACPI tables. > Patch 4/4 add corresponding ACPI_NUMA config for RISC-V Kconfig. > > Based-on: https://github.com/linux-riscv/linux-riscv/tree/for-next > > [1] https://mantis.uefi.org/mantis/view.php?id=2433 > [2] https://github.com/acpica/acpica/pull/926 > > Testing: > Since the ACPI AIA/PLIC support patch set is still under upstream review, > hence it is tested using the poll based HVC SBI console and RAM disk. > 1) Build latest Qemu with the following patch backported > https://lore.kernel.org/all/20240129094200.3581037-1-haibo1.xu@xxxxxxxxx/ > https://github.com/vlsunil/qemu/commit/42bd4eeefd5d4410a68f02d54fee406d8a1269b0 > > 2) Build latest EDK-II > https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md > > 3) Build Linux with the following configs enabled > CONFIG_RISCV_SBI_V01=y > CONFIG_SERIAL_EARLYCON_RISCV_SBI=y > CONFIG_HVC_RISCV_SBI=y > > 4) Build buildroot rootfs.cpio > > 5) Launch the Qemu machine > qemu-system-riscv64 -nographic \ > -machine virt,pflash0=pflash0,pflash1=pflash1 -smp 4 -m 8G \ > -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \ > -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \ > -object memory-backend-ram,size=4G,id=m0 \ > -object memory-backend-ram,size=4G,id=m1 \ > -numa node,memdev=m0,cpus=0-1,nodeid=0 \ > -numa node,memdev=m1,cpus=2-3,nodeid=1 \ > -numa dist,src=0,dst=1,val=30 \ > -kernel linux/arch/riscv/boot/Image \ > -initrd buildroot/output/images/rootfs.cpio \ > -append "root=/dev/ram ro console=hvc0 earlycon=sbi" > > [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x80000000-0x17fffffff] > [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x180000000-0x27fffffff] > [ 0.000000] NUMA: NODE_DATA [mem 0x17fe3bc40-0x17fe3cfff] > [ 0.000000] NUMA: NODE_DATA [mem 0x27fff4c40-0x27fff5fff] > ... > [ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x0 -> Node 0 > [ 0.000000] ACPI: NUMA: SRAT: PXM 0 -> HARTID 0x1 -> Node 0 > [ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x2 -> Node 1 > [ 0.000000] ACPI: NUMA: SRAT: PXM 1 -> HARTID 0x3 -> Node 1 > > Haibo Xu (4): > ACPICA: SRAT: Add RISC-V RINTC affinity structure > ACPI: NUMA: Add handler for SRAT RINTC affinity structure > ACPI: RISCV: Add NUMA support based on SRAT and SLIT > ACPI: RISCV: Enable ACPI based NUMA > > arch/riscv/Kconfig | 1 + > arch/riscv/include/asm/acpi.h | 15 +++- > arch/riscv/kernel/Makefile | 1 + > arch/riscv/kernel/acpi.c | 5 -- > arch/riscv/kernel/acpi_numa.c | 133 ++++++++++++++++++++++++++++++++++ > arch/riscv/kernel/setup.c | 4 +- > arch/riscv/kernel/smpboot.c | 2 - > drivers/acpi/numa/Kconfig | 2 +- > drivers/acpi/numa/srat.c | 35 ++++++++- > include/acpi/actbl3.h | 18 ++++- > include/linux/acpi.h | 7 ++ > 11 files changed, 209 insertions(+), 14 deletions(-) > create mode 100644 arch/riscv/kernel/acpi_numa.c > > -- > 2.34.1 >
