Re: [RFC KERNEL PATCH v4 3/3] PCI/sysfs: Add gsi sysfs for pci_dev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 31, 2024 at 09:58:19AM +0100, Roger Pau Monné wrote:
> On Tue, Jan 30, 2024 at 02:44:03PM -0600, Bjorn Helgaas wrote:
> > On Tue, Jan 30, 2024 at 10:07:36AM +0100, Roger Pau Monné wrote:
> > > On Mon, Jan 29, 2024 at 04:01:13PM -0600, Bjorn Helgaas wrote:
> > > > On Thu, Jan 25, 2024 at 07:17:24AM +0000, Chen, Jiqian wrote:
> > > > > On 2024/1/24 00:02, Bjorn Helgaas wrote:
> > > > > > On Tue, Jan 23, 2024 at 10:13:52AM +0000, Chen, Jiqian wrote:
> > > > > >> On 2024/1/23 07:37, Bjorn Helgaas wrote:
> > > > > >>> On Fri, Jan 05, 2024 at 02:22:17PM +0800, Jiqian Chen wrote:
> > > > > >>>> There is a need for some scenarios to use gsi sysfs.
> > > > > >>>> For example, when xen passthrough a device to dumU, it will
> > > > > >>>> use gsi to map pirq, but currently userspace can't get gsi
> > > > > >>>> number.
> > > > > >>>> So, add gsi sysfs for that and for other potential scenarios.
> > > > > >> ...
> > > > > > 
> > > > > >>> I don't know enough about Xen to know why it needs the GSI in
> > > > > >>> userspace.  Is this passthrough brand new functionality that can't be
> > > > > >>> done today because we don't expose the GSI yet?
> > > > 
> > > > I assume this must be new functionality, i.e., this kind of
> > > > passthrough does not work today, right?
> > > > 
> > > > > >> has ACPI support and is responsible for detecting and controlling
> > > > > >> the hardware, also it performs privileged operations such as the
> > > > > >> creation of normal (unprivileged) domains DomUs. When we give to a
> > > > > >> DomU direct access to a device, we need also to route the physical
> > > > > >> interrupts to the DomU. In order to do so Xen needs to setup and map
> > > > > >> the interrupts appropriately.
> > > > > > 
> > > > > > What kernel interfaces are used for this setup and mapping?
> > > > >
> > > > > For passthrough devices, the setup and mapping of routing physical
> > > > > interrupts to DomU are done on Xen hypervisor side, hypervisor only
> > > > > need userspace to provide the GSI info, see Xen code:
> > > > > xc_physdev_map_pirq require GSI and then will call hypercall to pass
> > > > > GSI into hypervisor and then hypervisor will do the mapping and
> > > > > routing, kernel doesn't do the setup and mapping.
> > > > 
> > > > So we have to expose the GSI to userspace not because userspace itself
> > > > uses it, but so userspace can turn around and pass it back into the
> > > > kernel?
> > > 
> > > No, the point is to pass it back to Xen, which doesn't know the
> > > mapping between GSIs and PCI devices because it can't execute the ACPI
> > > AML resource methods that provide such information.
> > > 
> > > The (Linux) kernel is just a proxy that forwards the hypercalls from
> > > user-space tools into Xen.
> > 
> > But I guess Xen knows how to interpret a GSI even though it doesn't
> > have access to AML?
> 
> On x86 Xen does know how to map a GSI into an IO-APIC pin, in order
> configure the RTE as requested.

IIUC, mapping a GSI to an IO-APIC pin requires information from the
MADT.  So I guess Xen does use the static ACPI tables, but not the AML
_PRT methods that would connect a GSI with a PCI device?

I guess this means Xen would not be able to deal with _MAT methods,
which also contains MADT entries?  I don't know the implications of
this -- maybe it means Xen might not be able to use with hot-added
devices?

The tables (including DSDT and SSDTS that contain the AML) are exposed
to userspace via /sys/firmware/acpi/tables/, but of course that
doesn't mean Xen knows how to interpret the AML, and even if it did,
Xen probably wouldn't be able to *evaluate* it since that could
conflict with the host kernel's use of AML.

Bjorn




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux