Re: [PATCH v2] x86/pci: Stop requiring ECAM to be declared in E820, ACPI or EFI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/25/2024 18:35, Bjorn Helgaas wrote:
On Wed, Jan 17, 2024 at 11:53:50AM -0600, Mario Limonciello wrote:
On 12/15/2023 16:03, Mario Limonciello wrote:
commit 7752d5cfe3d1 ("x86: validate against acpi motherboard resources")
introduced checks for ensuring that MCFG table also has memory region
reservations to ensure no conflicts were introduced from a buggy BIOS.

This has proceeded over time to add other types of reservation checks
for ACPI PNP resources and EFI MMIO memory type.  The PCI firmware spec
does say that these checks are only required when the operating system
doesn't comprehend the firmware region:

```
If the operating system does not natively comprehend reserving the MMCFG
region, the MMCFG region must be reserved by firmware. The address range
reported in the MCFG table or by _CBA method (see Section 4.1.3) must be
reserved by declaring a motherboard resource. For most systems, the
motherboard resource would appear at the root of the ACPI namespace
(under \_SB) in a node with a _HID of EISAID (PNP0C02), and the resources
in this case should not be claimed in the root PCI bus’s _CRS. The
resources can optionally be returned in Int15 E820h or EFIGetMemoryMap
as reserved memory but must always be reported through ACPI as a
motherboard resource.
```

Running this check causes problems with accessing extended PCI
configuration space on OEM laptops that don't specify the region in PNP
resources or in the EFI memory map. That later manifests as problems with
dGPU and accessing resizable BAR. Similar problems don't exist in Windows
11 with exact same laptop/firmware stack.

Due to the stability of the Windows ecosystem that x86 machines participate
it is unlikely that using the region specified in the MCFG table as
a reservation will cause a problem. The possible worst circumstance could
be that a buggy BIOS causes a larger hole in the memory map that is
unusable for devices than intended.

Change the default behavior to keep the region specified in MCFG even if
it's not specified in another source. This is expected to improve
machines that otherwise couldn't access PCI extended configuration space.

In case this change causes problems, add a kernel command line parameter
that can restore the previous behavior.

Link: https://members.pcisig.com/wg/PCI-SIG/document/15350
        PCI Firmware Specification 3.3
        Section 4.1.2 MCFG Table Description Note 2
Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---

Bjorn,

Any thoughts on this version since our last conversation on V1?

Just to let you know that I'm not ignoring this, and I'm trying to
formulate a useful response.

Thanks, I had been wondering.

FYI - we've also added another place to make noise about this ECAM issue in AMDGPU. This warning should go into 6.9:

https://lore.kernel.org/amd-gfx/20240110101319.695169-1-Jun.Ma2@xxxxxxx/

It will at least be interesting to see how many people come out of the woodwork to report that new warning.

mmconfig-shared.c has grown into an
extremely complicated mess and is a continual source of problems, so
I'd really like to untangle it a tiny bit if we can.

One thing is that per spec, ACPI motherboard resources are the ONLY
way to reserve ECAM space.  I'd like to reclaim a little clarity about
that and separate out the E820 and EFI stuff as secondary hacks.  But
there's an insane amount of history that got us here.

I guess you know better than anyone here. But if my idea is actually viable then the E820 and EFI stuff turn into "information only".


The problem we have to avoid is assigning a BAR that overlaps ECAM.
We assign BARs for lots of reasons.  dGPU and resizable BARs are
examples but there are others, like hotplug and SR-IOV.  The fact that
Windows works is a red herring because it allocates BARs differently.

Have we actually observed a case that assigning the BAR overlaps ECAM region thus far or it's hypothetical?

I would think that if the reservation is made by ECAM first, then any conflict for any reason that tries to assign it will just get a smaller BAR, but not necessarily a functional problem.

But that's also part of why I was thinking kernel command line for us to have the escape hatch.

It's also little bit of a burr under my saddle to add things for a
problem on unspecified machines, where I don't even know whether the
machines are already in the field or the firmware could still be
fixed.

Of the two machines I know of:

* One of them has been fixed by a BIOS change before it's final production stage.
* The other is still affected.

Here is the info for the still affected one.  It's been shipping already.

Alienware Alienware m18 R1 AMD/0RU01H, BIOS 1.2.2 04/21/2023


And of course, if there's any way to solve this safely without adding
yet another kernel parameter, that would be vastly preferable.

The kernel isn't static though; something we could do is keep the parameter around a year or two to get the bug feedback loop of people testing it and then rip it out if nothing comes up.


Sorry, nothing actionable here but wanted to let you know that it's
keeping me awake at night ;)

:)

Bjorn

v1->v2:
   * Rebase on pci/next
   * Add an escape hatch
   * Reword commit message
---
   .../admin-guide/kernel-parameters.txt         |  6 ++++++
   arch/x86/pci/mmconfig-shared.c                | 19 +++++++++++++++----
   2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 65731b060e3f..eacd0c0521c2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1473,6 +1473,12 @@
   			(in particular on some ATI chipsets).
   			The kernel tries to set a reasonable default.
+	enforce_ecam_resv [X86]
+			Enforce requiring an ECAM reservation specified in
+			BIOS for PCI devices.
+			This parameter is only valid if CONFIG_PCI_MMCONFIG
+			is enabled.
+
   	enforcing=	[SELINUX] Set initial enforcing status.
   			Format: {"0" | "1"}
   			See security/selinux/Kconfig help text.
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 0cc9520666ef..aee117c6bbf9 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -34,6 +34,15 @@ static DEFINE_MUTEX(pci_mmcfg_lock);
   LIST_HEAD(pci_mmcfg_list);
+static bool enforce_ecam_resv __read_mostly;
+static int __init parse_ecam_options(char *str)
+{
+	enforce_ecam_resv = true;
+
+	return 1;
+}
+__setup("enforce_ecam_resv", parse_ecam_options);
+
   static void __init pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
   {
   	if (cfg->res.parent)
@@ -569,10 +578,12 @@ static void __init pci_mmcfg_reject_broken(int early)
   	list_for_each_entry(cfg, &pci_mmcfg_list, list) {
   		if (!pci_mmcfg_reserved(NULL, cfg, early)) {
-			pr_info("not using ECAM (%pR not reserved)\n",
-				&cfg->res);
-			free_all_mmcfg();
-			return;
+			pr_info("ECAM %pR not reserved, %s\n", &cfg->res,
+				enforce_ecam_resv ? "ignoring" : "using anyway");
+			if (enforce_ecam_resv) {
+				free_all_mmcfg();
+				return;
+			}
   		}
   	}
   }

base-commit: 67e04d921cb6902e8c2abdbf748279d43f25213e






[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux