On Sun, 2024-01-14 at 17:20 +0000, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> This use of the new cleanup.h scope based freeing infrastructure allows
> us to exit directly from error conditions within the
> device_for_each_child_node(dev, child) loop. On normal exit from that
> loop no fwnode_handle reference will be held and the child pointer
> will be NULL thus making the automatically run fwnode_handle_put() a
> noop.
>
> Removing the goto err; statements also allows more extensive use of
> dev_err_probe() further simplifying the code.
>
> Cc: Mihail Chindris <mihail.chindris@xxxxxxxxxx>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
Acked-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> drivers/iio/dac/ad3552r.c | 50 +++++++++++++++------------------------
> 1 file changed, 19 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
> index a492e8f2fc0f..f21c88cb480a 100644
> --- a/drivers/iio/dac/ad3552r.c
> +++ b/drivers/iio/dac/ad3552r.c
> @@ -880,7 +880,7 @@ static void ad3552r_reg_disable(void *reg)
> static int ad3552r_configure_device(struct ad3552r_desc *dac)
> {
> struct device *dev = &dac->spi->dev;
> - struct fwnode_handle *child;
> + struct fwnode_handle *child __free(fwnode_handle) = NULL;
> struct regulator *vref;
> int err, cnt = 0, voltage, delta = 100000;
> u32 vals[2], val, ch;
> @@ -951,51 +951,43 @@ static int ad3552r_configure_device(struct ad3552r_desc
> *dac)
>
> device_for_each_child_node(dev, child) {
> err = fwnode_property_read_u32(child, "reg", &ch);
> - if (err) {
> - dev_err(dev, "mandatory reg property missing\n");
> - goto put_child;
> - }
> - if (ch >= AD3552R_NUM_CH) {
> - dev_err(dev, "reg must be less than %d\n",
> - AD3552R_NUM_CH);
> - err = -EINVAL;
> - goto put_child;
> - }
> + if (err)
> + return dev_err_probe(dev, err,
> + "mandatory reg property
> missing\n");
> + if (ch >= AD3552R_NUM_CH)
> + return dev_err_probe(dev, -EINVAL,
> + "reg must be less than %d\n",
> + AD3552R_NUM_CH);
>
> if (fwnode_property_present(child, "adi,output-range-
> microvolt")) {
> err = fwnode_property_read_u32_array(child,
> "adi,output-
> range-microvolt",
> vals,
> 2);
> - if (err) {
> - dev_err(dev,
> + if (err)
> + return dev_err_probe(dev, err,
> "adi,output-range-microvolt property
> could not be parsed\n");
> - goto put_child;
> - }
>
> err = ad3552r_find_range(dac->chip_id, vals);
> - if (err < 0) {
> - dev_err(dev,
> - "Invalid adi,output-range-microvolt
> value\n");
> - goto put_child;
> - }
> + if (err < 0)
> + return dev_err_probe(dev, err,
> + "Invalid adi,output-
> range-microvolt value\n");
> +
> val = err;
> err = ad3552r_set_ch_value(dac,
>
> AD3552R_CH_OUTPUT_RANGE_SEL,
> ch, val);
> if (err)
> - goto put_child;
> + return err;
>
> dac->ch_data[ch].range = val;
> } else if (dac->chip_id == AD3542R_ID) {
> - dev_err(dev,
> - "adi,output-range-microvolt is required for
> ad3542r\n");
> - err = -EINVAL;
> - goto put_child;
> + return dev_err_probe(dev, -EINVAL,
> + "adi,output-range-microvolt is
> required for ad3542r\n");
> } else {
> err = ad3552r_configure_custom_gain(dac, child, ch);
> if (err)
> - goto put_child;
> + return err;
> }
>
> ad3552r_calc_gain_and_offset(dac, ch);
> @@ -1003,7 +995,7 @@ static int ad3552r_configure_device(struct ad3552r_desc
> *dac)
>
> err = ad3552r_set_ch_value(dac, AD3552R_CH_SELECT, ch, 1);
> if (err < 0)
> - goto put_child;
> + return err;
>
> dac->channels[cnt] = AD3552R_CH_DAC(ch);
> ++cnt;
> @@ -1021,10 +1013,6 @@ static int ad3552r_configure_device(struct ad3552r_desc
> *dac)
> dac->num_ch = cnt;
>
> return 0;
> -put_child:
> - fwnode_handle_put(child);
> -
> - return err;
> }
>
> static int ad3552r_init(struct ad3552r_desc *dac)
