On Wed, Nov 29, 2023 at 04:22:41PM +0100, Fiona Ebner wrote:
> Hi,
> it seems that hot-plugging SCSI disks for QEMU virtual machines booting
> with UEFI and with guest kernels >= 6.5 might be broken. It's not
> consistently broken, hinting there might be a race somewhere.
>
> Reverting the following two commits seems to make it work reliably again:
>
> cc22522fd55e2 ("PCI: acpiphp: Use
> pci_assign_unassigned_bridge_resources() only for non-root bus")
> 40613da52b13f ("PCI: acpiphp: Reassign resources on bridge if necessary"
>
> Of course, they might only expose some pre-existing issue, but this is
> my best lead. See below for some logs and details about an affected
> virtual machine. Happy to provide more information and to debug/test
> further.
> ...
> I've attached some logs for guest using kernel 6.7.0-rc3 where hotplug
> works rarely and guest using kernel 6.7.0-rc3 with the previously
> mentioned commits reverted where hotplug works reliably:
>
> 6.7.0-rc3:
>
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io 0x0000-0x003f]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io 0xe040-0xe07f]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:12:02 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:12:02 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:12:02 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
> > Nov 29 15:12:02 hotplug kernel: scsi 3:0:0:1: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:02 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
What's the actual symptom that this is broken? All these log
fragments show the exact same assignments for BARs 0, 1, 4 and for the
bridge windows.
I assume 0000:01:02.0 is the hot-added SCSI HBA, and 00:05.0 is a
bridge leading to it?
Can you put the complete dmesg logs somewhere? There's a lot of
context missing here.
Do you have to revert both cc22522fd55e2 and 40613da52b13f to make it
work reliably? If we have to revert something, reverting one would be
better than reverting both.
Bjorn
> Reboot
>
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io 0x0000-0x003f]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io 0xe040-0xe07f]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:12:52 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:12:52 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:12:52 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:12:52 hotplug kernel: scsi 3:0:0:1: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:12:52 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
>
> RebootThe one time it did work. Note that the line with "QEMU HARDDISK"
> comes after all lines with "bridge window":
>
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io 0x0000-0x003f]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io 0xe040-0xe07f]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:13:51 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:13:51 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: PCI bridge to [bus 01]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc1400000-0xc15fffff]
> > Nov 29 15:13:51 hotplug kernel: pci 0000:00:05.0: bridge window [mem 0xc000000000-0xc01fffffff 64bit pref]
> > Nov 29 15:13:51 hotplug kernel: scsi 3:0:0:1: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: Attached scsi generic sg1 type 0
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: Power-on or device reset occurred
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Write Protect is off
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Mode Sense: 63 00 00 08
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > Nov 29 15:13:51 hotplug kernel: sd 3:0:0:1: [sdb] Attached SCSI disk
> > Nov 29 15:14:08 hotplug systemd[1]: systemd-fsckd.service: Deactivated successfully.
>
> 6.7.0-rc3 with the following reverted:
> cc22522fd55e2 ("PCI: acpiphp: Use
> pci_assign_unassigned_bridge_resources() only for non-root bus")
> 40613da52b13f ("PCI: acpiphp: Reassign resources on bridge if necessary")
>
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: [1af4:1004] type 00 class 0x010000
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: reg 0x10: [io 0x0000-0x003f]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: reg 0x14: [mem 0x00000000-0x00000fff]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: BAR 4: assigned [mem 0xc000004000-0xc000007fff 64bit pref]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: BAR 1: assigned [mem 0xc1401000-0xc1401fff]
> > Nov 29 15:15:37 hotplug kernel: pci 0000:01:02.0: BAR 0: assigned [io 0xe040-0xe07f]
> > Nov 29 15:15:37 hotplug kernel: virtio-pci 0000:01:02.0: enabling device (0000 -> 0003)
> > Nov 29 15:15:37 hotplug kernel: ACPI: \_SB_.LNKC: Enabled at IRQ 11
> > Nov 29 15:15:37 hotplug kernel: scsi host3: Virtio SCSI HBA
> > Nov 29 15:15:37 hotplug kernel: scsi 3:0:0:1: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: Attached scsi generic sg1 type 0
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: Power-on or device reset occurred
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB)
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Write Protect is off
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Mode Sense: 63 00 00 08
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > Nov 29 15:15:37 hotplug kernel: sd 3:0:0:1: [sdb] Attached SCSI disk
> > Nov 29 15:15:38 hotplug systemd[1]: systemd-fsckd.service: Deactivated successfully.
>
