[PATCH 6/6] media: imx219: Use pm_runtime_get_if_active(), put usage_count correctly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use pm_runtime_get_if_active() to get the device's runtime PM usage_count
and set controls, then use runtime PM autosuspend once the controls have
been set (instead of likely transitioning to suspended state immediately).

Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
 drivers/media/i2c/imx219.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 8436880dcf7a..b38ee8b3e073 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -371,7 +371,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
 	const struct v4l2_mbus_framefmt *format;
 	struct v4l2_subdev_state *state;
-	int ret = 0;
+	int ret = 0, pm_status;
 
 	state = v4l2_subdev_get_locked_active_state(&imx219->sd);
 	format = v4l2_subdev_get_pad_format(&imx219->sd, state, 0);
@@ -393,7 +393,8 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 	 * Applying V4L2 control value only happens
 	 * when power is up for streaming
 	 */
-	if (pm_runtime_get_if_in_use(&client->dev) == 0)
+	pm_status = pm_runtime_get_if_active(&client->dev);
+	if (!pm_status)
 		return 0;
 
 	switch (ctrl->id) {
@@ -446,7 +447,8 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
-	pm_runtime_put(&client->dev);
+	if (pm_status > 0)
+		pm_runtime_put(&client->dev);
 
 	return ret;
 }
-- 
2.39.2





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux