From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx> Use the connection information extracted from the _CRS CSI-2 resource descriptors for all devices that have them to populate port names and the "reg", "bus-type" and "remote-endpoint" properties in the software nodes representing the CSI-2 connection graph. Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#camera-serial-interface-csi-2-connection-resource-descriptor Co-developed-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx> --- drivers/acpi/mipi-di.c | 153 +++++++++++++++++++++++++++++++++++++++++++++++- include/acpi/acpi_bus.h | 53 ++++++++++++++++ 2 files changed, 205 insertions(+), 1 deletion(-) Index: linux-pm/include/acpi/acpi_bus.h =================================================================== --- linux-pm.orig/include/acpi/acpi_bus.h +++ linux-pm/include/acpi/acpi_bus.h @@ -366,8 +366,61 @@ struct acpi_device_data { struct acpi_gpio_mapping; +#define ACPI_DEVICE_CSI2_DATA_LANES 4 + +#define ACPI_DEVICE_SWNODE_PORT_NAME_LENGTH 8 + +enum acpi_device_swnode_port_props { + ACPI_DEVICE_SWNODE_PORT_REG, + ACPI_DEVICE_SWNODE_PORT_NUM_OF, + ACPI_DEVICE_SWNODE_PORT_NUM_ENTRIES +}; + +enum acpi_device_swnode_ep_props { + ACPI_DEVICE_SWNODE_EP_REMOTE_EP, + ACPI_DEVICE_SWNODE_EP_BUS_TYPE, + ACPI_DEVICE_SWNODE_EP_REG, + ACPI_DEVICE_SWNODE_EP_CLOCK_LANES, + ACPI_DEVICE_SWNODE_EP_DATA_LANES, + ACPI_DEVICE_SWNODE_EP_LANE_POLARITIES, + /* TX only */ + ACPI_DEVICE_SWNODE_EP_LINK_FREQUENCIES, + ACPI_DEVICE_SWNODE_EP_NUM_OF, + ACPI_DEVICE_SWNODE_EP_NUM_ENTRIES +}; + +/* + * Each device has a root software node plus two times as many nodes as the + * number of CSI-2 ports. + */ +#define ACPI_DEVICE_SWNODE_PORT(port) (2 * (port) + 1) +#define ACPI_DEVICE_SWNODE_EP(endpoint) \ + (ACPI_DEVICE_SWNODE_PORT(endpoint) + 1) + +/** + * struct acpi_device_software_node_port - MIPI DisCo for Imaging CSI-2 port + * @port_name: Port name. + * @data_lanes: "data-lanes" property values. + * @lane_polarities: "lane-polarities" property values. + * @link_frequencies: "link_frequencies" property values. + * @port_nr: Port number. + * @crs_crs2_local: _CRS CSI2 record present (i.e. this is a transmitter one). + * @port_props: Port properties. + * @ep_props: Endpoint properties. + * @remote_ep: Reference to the remote endpoint. + */ struct acpi_device_software_node_port { + char port_name[ACPI_DEVICE_SWNODE_PORT_NAME_LENGTH + 1]; + u32 data_lanes[ACPI_DEVICE_CSI2_DATA_LANES]; + u32 lane_polarities[ACPI_DEVICE_CSI2_DATA_LANES + 1 /* clock lane */]; + u64 link_frequencies[ACPI_DEVICE_CSI2_DATA_LANES]; unsigned int port_nr; + bool crs_csi2_local; + + struct property_entry port_props[ACPI_DEVICE_SWNODE_PORT_NUM_ENTRIES]; + struct property_entry ep_props[ACPI_DEVICE_SWNODE_EP_NUM_ENTRIES]; + + struct software_node_ref_args remote_ep[1]; }; /** Index: linux-pm/drivers/acpi/mipi-di.c =================================================================== --- linux-pm.orig/drivers/acpi/mipi-di.c +++ linux-pm/drivers/acpi/mipi-di.c @@ -23,6 +23,8 @@ #include <linux/slab.h> #include <linux/string.h> +#include <media/v4l2-fwnode.h> + #include "internal.h" static LIST_HEAD(acpi_mipi_crs_csi2_list); @@ -240,6 +242,142 @@ overflow: port_count); } +#define ACPI_CRS_CSI2_PHY_TYPE_C 0 +#define ACPI_CRS_CSI2_PHY_TYPE_D 1 + +static unsigned int next_csi2_port_index(struct acpi_device_software_nodes *swnodes, + unsigned int port_nr) +{ + unsigned int i; + + for (i = 0; i < swnodes->num_ports; i++) { + struct acpi_device_software_node_port *port = &swnodes->ports[i]; + + if (port->port_nr == port_nr) + return i; + + if (port->port_nr == NO_CSI2_PORT) { + port->port_nr = port_nr; + return i; + } + } + + return NO_CSI2_PORT; +} + +/* Print graph port name into a buffer, return non-zero on failure. */ +#define GRAPH_PORT_NAME(var, num) \ + (snprintf((var), sizeof(var), SWNODE_GRAPH_PORT_NAME_FMT, (num)) >= \ + sizeof(var)) + +static void extract_crs_csi2_conn_info(acpi_handle local_handle, + struct acpi_device_software_nodes *local_swnodes, + struct crs_csi2_connection *conn) +{ + struct crs_csi2 *remote_csi2 = acpi_mipi_get_crs_csi2(conn->remote_handle); + struct acpi_device_software_nodes *remote_swnodes; + struct acpi_device_software_node_port *local_port, *remote_port; + struct software_node *local_node, *remote_node; + unsigned int local_index, remote_index; + unsigned int bus_type; + + /* + * If the previous steps have failed to make room for a _CRS CSI-2 + * representation for the remote end of the given connection, skip it. + */ + if (!remote_csi2) + return; + + remote_swnodes = remote_csi2->swnodes; + if (!remote_swnodes) + return; + + switch (conn->csi2_data.phy_type) { + case ACPI_CRS_CSI2_PHY_TYPE_C: + bus_type = V4L2_FWNODE_BUS_TYPE_CSI2_CPHY; + break; + + case ACPI_CRS_CSI2_PHY_TYPE_D: + bus_type = V4L2_FWNODE_BUS_TYPE_CSI2_DPHY; + break; + + default: + acpi_handle_info(local_handle, "unknown CSI-2 PHY type %u\n", + conn->csi2_data.phy_type); + return; + } + + local_index = next_csi2_port_index(local_swnodes, + conn->csi2_data.local_port_instance); + if (WARN_ON_ONCE(local_index >= local_swnodes->num_ports)) + return; + + remote_index = next_csi2_port_index(remote_swnodes, + conn->csi2_data.resource_source.index); + if (WARN_ON_ONCE(remote_index >= remote_swnodes->num_ports)) + return; + + local_port = &local_swnodes->ports[local_index]; + local_node = &local_swnodes->nodes[ACPI_DEVICE_SWNODE_EP(local_index)]; + local_port->crs_csi2_local = true; + + remote_port = &remote_swnodes->ports[remote_index]; + remote_node = &remote_swnodes->nodes[ACPI_DEVICE_SWNODE_EP(remote_index)]; + + local_port->remote_ep[0] = SOFTWARE_NODE_REFERENCE(remote_node); + remote_port->remote_ep[0] = SOFTWARE_NODE_REFERENCE(local_node); + + local_port->ep_props[ACPI_DEVICE_SWNODE_EP_REMOTE_EP] = + PROPERTY_ENTRY_REF_ARRAY("remote-endpoint", + local_port->remote_ep); + + local_port->ep_props[ACPI_DEVICE_SWNODE_EP_BUS_TYPE] = + PROPERTY_ENTRY_U32("bus-type", bus_type); + + local_port->ep_props[ACPI_DEVICE_SWNODE_EP_REG] = + PROPERTY_ENTRY_U32("reg", 0); + + local_port->port_props[ACPI_DEVICE_SWNODE_PORT_REG] = + PROPERTY_ENTRY_U32("reg", conn->csi2_data.local_port_instance); + + if (GRAPH_PORT_NAME(local_port->port_name, + conn->csi2_data.local_port_instance)) + acpi_handle_info(local_handle, "local port %u name too long", + conn->csi2_data.local_port_instance); + + remote_port->ep_props[ACPI_DEVICE_SWNODE_EP_REMOTE_EP] = + PROPERTY_ENTRY_REF_ARRAY("remote-endpoint", + remote_port->remote_ep); + + remote_port->ep_props[ACPI_DEVICE_SWNODE_EP_BUS_TYPE] = + PROPERTY_ENTRY_U32("bus-type", bus_type); + + remote_port->ep_props[ACPI_DEVICE_SWNODE_EP_REG] = + PROPERTY_ENTRY_U32("reg", 0); + + remote_port->port_props[ACPI_DEVICE_SWNODE_PORT_REG] = + PROPERTY_ENTRY_U32("reg", conn->csi2_data.resource_source.index); + + if (GRAPH_PORT_NAME(remote_port->port_name, + conn->csi2_data.resource_source.index)) + acpi_handle_info(local_handle, "remote port %u name too long", + conn->csi2_data.resource_source.index); +} + +static void prepare_crs_csi2_swnodes(struct crs_csi2 *csi2) +{ + struct acpi_device_software_nodes *local_swnodes = csi2->swnodes; + acpi_handle local_handle = csi2->handle; + struct crs_csi2_connection *conn; + + /* Bail out if the allocation of swnodes has failed. */ + if (!local_swnodes) + return; + + list_for_each_entry(conn, &csi2->connections, entry) + extract_crs_csi2_conn_info(local_handle, local_swnodes, conn); +} + /** * acpi_mipi_scan_crs_csi2 - Create ACPI _CRS CSI-2 software nodes * @@ -278,9 +416,22 @@ void acpi_mipi_scan_crs_csi2(void) } list_splice(&aux_list, &acpi_mipi_crs_csi2_list); - /* Allocate softwware nodes for representing the CSI-2 information. */ + /* + * Allocate softwware nodes for representing the CSI-2 information. + * + * This needs to be done for all of the list entries in one go, because + * they may point to each other without restrictions and the next step + * relies on the availability of swnodes memory for each list entry. + */ list_for_each_entry(csi2, &acpi_mipi_crs_csi2_list, entry) alloc_crs_csi2_swnodes(csi2); + + /* + * Set up software node properties using data from _CRS CSI-2 resource + * descriptors. + */ + list_for_each_entry(csi2, &acpi_mipi_crs_csi2_list, entry) + prepare_crs_csi2_swnodes(csi2); } /**
