[PATCH v1 3/3] gpiolib: Make debug messages in gpiod_find_by_fwnode() less confusing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently the extended debug messages have added confusion,
but value when con_id is NULL, which is the case for, e.g.,
GPIO LEDs.

Improve the messaging by using GPIO function name rather than con_id.
This requires to split and move the second part after the respective
calls.

Reported-by: Ferry Toth <ftoth@xxxxxxxxxxxxxx>
Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/gpio/gpiolib.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index beac3031246e..2cc275fb62b6 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3946,18 +3946,15 @@ static struct gpio_desc *gpiod_find_by_fwnode(struct fwnode_handle *fwnode,
 	struct gpio_desc *desc = ERR_PTR(-ENOENT);
 
 	if (is_of_node(fwnode)) {
-		dev_dbg(consumer, "using DT '%pfw' for '%s' GPIO lookup\n",
-			fwnode, con_id);
+		dev_dbg(consumer, "using DT '%pfw' for GPIO lookup\n", fwnode);
 		desc = of_find_gpio(to_of_node(fwnode), con_id, idx, propname, propsize,
 				    lookupflags);
 	} else if (is_acpi_node(fwnode)) {
-		dev_dbg(consumer, "using ACPI '%pfw' for '%s' GPIO lookup\n",
-			fwnode, con_id);
+		dev_dbg(consumer, "using ACPI '%pfw' for GPIO lookup\n", fwnode);
 		desc = acpi_find_gpio(fwnode, con_id, idx, propname, propsize,
 				      flags, lookupflags);
 	} else if (is_software_node(fwnode)) {
-		dev_dbg(consumer, "using swnode '%pfw' for '%s' GPIO lookup\n",
-			fwnode, con_id);
+		dev_dbg(consumer, "using swnode '%pfw' for GPIO lookup\n", fwnode);
 		desc = swnode_find_gpio(fwnode, con_id, idx, propname, propsize,
 					lookupflags);
 	}
@@ -3993,10 +3990,12 @@ static struct gpio_desc *gpiod_find_and_request(struct device *consumer,
 	}
 
 	if (IS_ERR(desc)) {
-		dev_dbg(consumer, "No GPIO consumer %s found\n", con_id);
+		dev_dbg(consumer, "No GPIO descriptor for '%s' found\n", funcname);
 		return desc;
 	}
 
+	dev_dbg(consumer, "Found GPIO descriptor for '%s'\n", funcname);
+
 	/*
 	 * If a connection label was passed use that, else attempt to use
 	 * the device name as label
@@ -4015,13 +4014,13 @@ static struct gpio_desc *gpiod_find_and_request(struct device *consumer,
 		 * FIXME: Make this more sane and safe.
 		 */
 		dev_info(consumer,
-			 "nonexclusive access to GPIO for %s\n", con_id);
+			 "nonexclusive access to GPIO for %s\n", funcname);
 		return desc;
 	}
 
 	ret = gpiod_configure_flags(desc, funcname, lookupflags, flags);
 	if (ret < 0) {
-		dev_dbg(consumer, "setup of GPIO %s failed\n", con_id);
+		dev_dbg(consumer, "setup of GPIO %s failed\n", funcname);
 		gpiod_put(desc);
 		return ERR_PTR(ret);
 	}
-- 
2.40.0.1.gaa8946217a0b





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux