Re: [PATCH v2 2/2] PCI: hotplug: Add extension driver for Ampere Altra hotplug LED control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 30, 2023 at 2:20 AM D Scott Phillips
<scott@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is
> also present to request system firmware control of attention LEDs. Add an
> ACPI PCI Hotplug companion driver to support attention LED control.
>
> Signed-off-by: D Scott Phillips <scott@xxxxxxxxxxxxxxxxxxxxxx>

Acked-by: Rafael J. Wysocki <rafael@xxxxxxxxxx>

for the probing part.

> ---
> Changes since v1:
> - remove build-as-module restriction
> - add some more description
> - don't open code PCI_SLOT()
> - convert to a platform driver
>
>  drivers/pci/hotplug/Kconfig                |  12 ++
>  drivers/pci/hotplug/Makefile               |   1 +
>  drivers/pci/hotplug/acpiphp_ampere_altra.c | 127 +++++++++++++++++++++
>  3 files changed, 140 insertions(+)
>  create mode 100644 drivers/pci/hotplug/acpiphp_ampere_altra.c
>
> diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
> index 48113b210cf93..1472aef0fb812 100644
> --- a/drivers/pci/hotplug/Kconfig
> +++ b/drivers/pci/hotplug/Kconfig
> @@ -61,6 +61,18 @@ config HOTPLUG_PCI_ACPI
>
>           When in doubt, say N.
>
> +config HOTPLUG_PCI_ACPI_AMPERE_ALTRA
> +       tristate "ACPI PCI Hotplug driver Ampere Altra extensions"
> +       depends on HOTPLUG_PCI_ACPI
> +       depends on HAVE_ARM_SMCCC_DISCOVERY
> +       help
> +         Say Y here if you have an Ampere Altra system.
> +
> +         To compile this driver as a module, choose M here: the
> +         module will be called acpiphp_ampere_altra.
> +
> +         When in doubt, say N.
> +
>  config HOTPLUG_PCI_ACPI_IBM
>         tristate "ACPI PCI Hotplug driver IBM extensions"
>         depends on HOTPLUG_PCI_ACPI
> diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
> index 5196983220df6..240c99517d5e9 100644
> --- a/drivers/pci/hotplug/Makefile
> +++ b/drivers/pci/hotplug/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_HOTPLUG_PCI_S390)                += s390_pci_hpc.o
>
>  # acpiphp_ibm extends acpiphp, so should be linked afterwards.
>
> +obj-$(CONFIG_HOTPLUG_PCI_ACPI_AMPERE_ALTRA)    += acpiphp_ampere_altra.o
>  obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM)     += acpiphp_ibm.o
>
>  pci_hotplug-objs       :=      pci_hotplug_core.o
> diff --git a/drivers/pci/hotplug/acpiphp_ampere_altra.c b/drivers/pci/hotplug/acpiphp_ampere_altra.c
> new file mode 100644
> index 0000000000000..1b1fe5d6a3fbf
> --- /dev/null
> +++ b/drivers/pci/hotplug/acpiphp_ampere_altra.c
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ACPI PCI Hot Plug Extension for Ampere Altra. Allows control of
> + * attention LEDs via requests to system firmware.
> + *
> + * Copyright (C) 2023 Ampere Computing LLC
> + */
> +
> +#define pr_fmt(fmt) "acpiphp_ampere_altra: " fmt
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/pci_hotplug.h>
> +#include <linux/platform_device.h>
> +
> +#include "acpiphp.h"
> +
> +#define HANDLE_OPEN    0xb0200000
> +#define HANDLE_CLOSE   0xb0300000
> +#define REQUEST                0xf0700000
> +#define LED_CMD                0x00000004
> +#define LED_ATTENTION  0x00000002
> +#define LED_SET_ON     0x00000001
> +#define LED_SET_OFF    0x00000002
> +#define LED_SET_BLINK  0x00000003
> +
> +static u32 led_service_id[4];
> +
> +static int led_status(u8 status)
> +{
> +       switch (status) {
> +       case 1: return LED_SET_ON;
> +       case 2: return LED_SET_BLINK;
> +       default: return LED_SET_OFF;
> +       }
> +}
> +
> +static int set_attention_status(struct hotplug_slot *slot, u8 status)
> +{
> +       struct arm_smccc_res res;
> +       struct pci_bus *bus;
> +       struct pci_dev *root_port;
> +       unsigned long flags;
> +       u32 handle;
> +       int ret = 0;
> +
> +       bus = slot->pci_slot->bus;
> +       root_port = pcie_find_root_port(bus->self);
> +       if (!root_port)
> +               return -ENODEV;
> +
> +       local_irq_save(flags);
> +       arm_smccc_smc(HANDLE_OPEN, led_service_id[0], led_service_id[1],
> +                     led_service_id[2], led_service_id[3], 0, 0, 0, &res);
> +       if (res.a0) {
> +               ret = -ENODEV;
> +               goto out;
> +       }
> +       handle = res.a1 & 0xffff0000;
> +
> +       arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION,
> +                     pci_domain_nr(bus) | (PCI_SLOT(root_port->devfn) << 4), 0, 0,
> +                     handle, &res);
> +       if (res.a0)
> +               ret = -ENODEV;
> +
> +       arm_smccc_smc(HANDLE_CLOSE, handle, 0, 0, 0, 0, 0, 0, &res);
> +
> + out:
> +       local_irq_restore(flags);
> +       return ret;
> +}
> +
> +static int get_attention_status(struct hotplug_slot *slot, u8 *status)
> +{
> +       return -EINVAL;
> +}
> +
> +static struct acpiphp_attention_info ampere_altra_attn = {
> +       .set_attn = set_attention_status,
> +       .get_attn = get_attention_status,
> +       .owner = THIS_MODULE,
> +};
> +
> +static int altra_led_probe(struct platform_device *pdev)
> +{
> +       struct fwnode_handle *fwnode = dev_fwnode(&pdev->dev);
> +       int ret;
> +
> +       ret = fwnode_property_read_u32_array(fwnode, "uuid", led_service_id, 4);
> +       if (ret) {
> +               dev_err(&pdev->dev, "can't find uuid\n");
> +               return ret;
> +       }
> +
> +       ret = acpiphp_register_attention(&ampere_altra_attn);
> +       if (ret) {
> +               dev_err(&pdev->dev, "can't register driver\n");
> +               return ret;
> +       }
> +       return 0;
> +}
> +
> +static void altra_led_remove(struct platform_device *pdev)
> +{
> +       acpiphp_unregister_attention(&ampere_altra_attn);
> +}
> +
> +static const struct acpi_device_id altra_led_ids[] = {
> +       { "AMPC0008", 0 },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(acpi, altra_led_ids);
> +
> +static struct platform_driver altra_led_driver = {
> +       .driver = {
> +               .name = "ampere-altra-leds",
> +               .acpi_match_table = altra_led_ids,
> +       },
> +       .probe = altra_led_probe,
> +       .remove_new = altra_led_remove,
> +};
> +module_platform_driver(altra_led_driver);
> +
> +MODULE_AUTHOR("D Scott Phillips <scott@xxxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 2.41.0
>





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux