Hi, Jonathan, Please attach the acpidump output using the latest pmtools at : http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ Please attach the result of "cat /proc/acpi/thermal_zone/*/*" as well. thanks, rui On Fri, 2008-02-29 at 04:08 +0800, Jonathan McDowell wrote: > I'm getting a "general protection fault" when trying to boot > 2.6.25-rc3 > on my AMD64 box; 2.6.24 boots fine. The machine just seems to end up > sitting there at the end, but still responds to a ctrl-alt-del to > cleanly shutdown. The GPF is as follows: > > ----- > general protection fault: 0000 [1] PREEMPT SMP > CPU 1 > Modules linked in: thermal(+) processor fan > Pid: 598, comm: modprobe Not tainted 2.6.25-rc3 #1 > RIP: 0010:[<ffffffff803590a8>] [<ffffffff803590a8>] > acpi_ns_map_handle_to_node+0x19/0x23 > RSP: 0018:ffff81011de5fc68 EFLAGS: 00010246 > RAX: 0000000000000000 RBX: 0000000000001001 RCX: 0000000000000000 > RDX: 0000000000005067 RSI: 0000000000000001 RDI: 4d52454854584e4c > RBP: ffff81011de5fc68 R08: 0000000000000000 R09: ffff81011de5fc78 > R10: ffff81011dcc0648 R11: ffffffff802d566a R12: 4d52454854584e4c > R13: ffff81011de5fcf8 R14: ffffffff80362bd3 R15: 0000000000000003 > FS: 00007f04840336e0(0000) GS:ffff81011fab1bc0(0000) > knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 00007f0484032000 CR3: 000000011defc000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process modprobe (pid: 598, threadinfo ffff81011de5e000, task > ffff81011de38640) > Stack: ffff81011de5fc98 ffffffff803584ab ffff81011de5fcf8 > ffff81011df1a800 > 0000000000000000 ffff81011de5fcf8 ffff81011de5fcb8 ffffffff80362382 > ffff81011de52230 0000000000000001 ffff81011de5fd28 ffffffff880113a9 > Call Trace: > [<ffffffff803584ab>] acpi_get_data+0x3f/0x70 > [<ffffffff80362382>] acpi_bus_get_device+0x25/0x39 > [<ffffffff880113a9>] :thermal:acpi_thermal_cooling_device_cb > +0x6b/0x166 > [<ffffffff80405ee8>] ? thermal_zone_bind_cooling_device+0x0/0x26e > [<ffffffff880114c6>] :thermal:acpi_thermal_bind_cooling_device > +0x10/0x12 > [<ffffffff80405e68>] thermal_zone_device_register+0x252/0x2d2 > [<ffffffff88011626>] :thermal:acpi_thermal_add+0x15e/0x42b > [<ffffffff80364138>] acpi_device_probe+0x45/0x92 > [<ffffffff803aac23>] driver_probe_device+0xc0/0x147 > [<ffffffff803aad55>] ? __driver_attach+0x0/0x94 > [<ffffffff803aadb0>] __driver_attach+0x5b/0x94 > [<ffffffff803a9f55>] bus_for_each_dev+0x4f/0x7f > [<ffffffff803aaa6e>] driver_attach+0x1c/0x1e > [<ffffffff803aa81e>] bus_add_driver+0xb7/0x201 > [<ffffffff803aafdb>] driver_register+0x5e/0xd6 > [<ffffffff803644ce>] acpi_bus_register_driver+0x3e/0x40 > [<ffffffff88017061>] :thermal:acpi_thermal_init+0x61/0x83 > [<ffffffff80257120>] sys_init_module+0x98/0x16b > [<ffffffff8020c0eb>] system_call_after_swapgs+0x7b/0x80 > > > Code: 83 c6 04 41 ff c8 45 85 c0 75 a7 c6 06 00 31 c0 c9 c3 48 8d 47 > ff 55 48 83 f8 fd 48 89 e5 76 09 48 8b 05 cc 49 3f 00 eb 0a 31 c0 <80> > 7f 08 0f 48 0f 44 c7 c9 c3 55 48 89 f8 48 89 e5 c9 c3 55 31 > RIP [<ffffffff803590a8>] acpi_ns_map_handle_to_node+0x19/0x23 > RSP <ffff81011de5fc68> > ---[ end trace c027ad8802a9e766 ]--- > Segmentation fault > ----- > > Full boot log is at: > > http://the.earth.li/~noodles/2.6.25-breakage/meepok.console-2.6.25-rc3.log > > Config at: > > http://the.earth.li/~noodles/2.6.25-breakage/config-2.6.25-rc3 > > 2.6.25-rc1 and 2.6.25-rc2-git6 both show the same issue. > > J. > > -- > jid: > noodles@xxxxxxxxxxxxxxx > In God we trust; all else we walk through. > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" > in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
