Re: [PATCH 1/1] PCI: acpiphp:: use pci_assign_unassigned_bridge_resources() only if bus->self not NULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you to both you and Woody for chasing this down!

On Wed, Jul 26, 2023 at 02:35:18PM +0200, Igor Mammedov wrote:
> Commit [1] switched acpiphp hotplug to use
>    pci_assign_unassigned_bridge_resources()
> which depends on bridge being available, however in some cases
> when acpiphp is in use, enable_slot() can get a slot without
> bridge associated.
>   1. legitimate case of hotplug on root bus
>       (likely not exiting on real hw, but widely used in virt world)
>   2. broken firmware, that sends 'Bus check' events to non
>      existing root ports (Dell Inspiron 7352/0W6WV0), which somehow
>      endup at acpiphp:enable_slot(..., bridge = 0) and with bus
>      without bridge assigned to it.

Do we have evidence about the details of this non-existent root port?
If we do, I think it would be interesting to include a URL to them in
case there's some hole in the way we handle Bus Check events.

> Issue is easy to reproduce with QEMU's 'pc' machine provides
> PCI hotplug on hostbridge slots. to reproduce boot kernel at
> commit [1] in VM started with followin CLI and hotplug a device:

You mention CLI; did you mean to include a qemu command line here?
Maybe it's the same thing mentioned in the 40613da52b13 commit log?
I tried briefly to reproduce this using the 40613da52b13 command line
but haven't quite got it going yet.  I think it would be very useful
to either include it here again or point to the 40613da52b13 commit
log.

> once guest OS is fully booted at qemu prompt:
> 
> (qemu) device_add e1000
> 
> it will cause NULL pointer dereference at
> 
>     void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
>     {
>         struct pci_bus *parent = bridge->subordinate;
> 
> [  612.277651] BUG: kernel NULL pointer dereference, address: 0000000000000018
> [...]
> [  612.277798]  ? pci_assign_unassigned_bridge_resources+0x1f/0x260
> [  612.277804]  ? pcibios_allocate_dev_resources+0x3c/0x2a0
> [  612.277809]  enable_slot+0x21f/0x3e0
> [  612.277816]  acpiphp_hotplug_notify+0x13d/0x260
> [  612.277822]  ? __pfx_acpiphp_hotplug_notify+0x10/0x10
> [  612.277827]  acpi_device_hotplug+0xbc/0x540
> [  612.277834]  acpi_hotplug_work_fn+0x15/0x20
> [  612.277839]  process_one_work+0x1f7/0x370
> [  612.277845]  worker_thread+0x45/0x3b0
> [  612.277850]  ? __pfx_worker_thread+0x10/0x10
> [  612.277854]  kthread+0xdc/0x110
> [  612.277860]  ? __pfx_kthread+0x10/0x10
> [  612.277866]  ret_from_fork+0x28/0x40
> [  612.277871]  ? __pfx_kthread+0x10/0x10
> [  612.277876]  ret_from_fork_asm+0x1b/0x30
> 
> The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with
> following sequence:
>    1. suspend to RAM
>    2. wake up with the same backtrace being observed:
>    3. 2nd suspend to RAM attempt makes laptop freeze
> 
> Fix it by using __pci_bus_assign_resources() instead of
> pci_assign_unassigned_bridge_resources()as we used to do
> but only in case when bus doesn't have a bridge associated
> with it.
> 
> That let us keep hotplug on root bus working like it used to be
> but at the same time keeps resource reassignment usable on
> root ports (and other 1st level bridges) that was fixed by [1].
> 
> 1)
> Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
> Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@xxxxxxxxx
> Reported-by: Woody Suwalski <terraluna977@xxxxxxxxx>
> Signed-off-by: Igor Mammedov <imammedo@xxxxxxxxxx>
> ---
>  drivers/pci/hotplug/acpiphp_glue.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> index 328d1e416014..3bc4e1f3efee 100644
> --- a/drivers/pci/hotplug/acpiphp_glue.c
> +++ b/drivers/pci/hotplug/acpiphp_glue.c
> @@ -498,6 +498,7 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge)
>  				acpiphp_native_scan_bridge(dev);
>  		}
>  	} else {
> +		LIST_HEAD(add_list);
>  		int max, pass;
>  
>  		acpiphp_rescan_slot(slot);
> @@ -511,10 +512,15 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge)
>  				if (pass && dev->subordinate) {
>  					check_hotplug_bridge(slot, dev);
>  					pcibios_resource_survey_bus(dev->subordinate);
> +					if (!bus->self)
> +						__pci_bus_size_bridges(dev->subordinate, &add_list);
>  				}
>  			}
>  		}
> -		pci_assign_unassigned_bridge_resources(bus->self);
> +		if (bus->self)
> +			pci_assign_unassigned_bridge_resources(bus->self);
> +		else
> +			__pci_bus_assign_resources(bus, &add_list, NULL);
>  	}
>  
>  	acpiphp_sanitize_bus(bus);
> -- 
> 2.39.3
> 



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux