[PATCH 2/2] ACPI: show temperature in millidegree Celsius

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Show the temperature in Millidegree Celsius.

Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
---
 drivers/acpi/thermal.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

Index: linux-2.6/drivers/acpi/thermal.c
===================================================================
--- linux-2.6.orig/drivers/acpi/thermal.c
+++ linux-2.6/drivers/acpi/thermal.c
@@ -879,6 +879,8 @@ static void acpi_thermal_check(void *dat
 }
 
 /* sys I/F for generic thermal sysfs support */
+#define KELVIN_TO_MILLICELSIUS(t) (KELVIN_TO_CELSIUS(t) * 1000)
+
 static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
 {
 	struct acpi_thermal *tz = thermal->devdata;
@@ -886,7 +888,7 @@ static int thermal_get_temp(struct therm
 	if (!tz)
 		return -EINVAL;
 
-	return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(tz->temperature));
+	return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
 }
 
 static const char enabled[] = "kernel";
@@ -980,21 +982,21 @@ static int thermal_get_trip_temp(struct 
 
 	if (tz->trips.critical.flags.valid) {
 		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
 				tz->trips.critical.temperature));
 		trip--;
 	}
 
 	if (tz->trips.hot.flags.valid) {
 		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
 					tz->trips.hot.temperature));
 		trip--;
 	}
 
 	if (tz->trips.passive.flags.valid) {
 		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
 					tz->trips.passive.temperature));
 		trip--;
 	}
@@ -1002,7 +1004,7 @@ static int thermal_get_trip_temp(struct 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 		tz->trips.active[i].flags.valid; i++) {
 		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_CELSIUS(
+			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
 					tz->trips.active[i].temperature));
 		trip--;
 	}


-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux