Re: [PATCH v3 17/18] media: atomisp: csi2-bridge: Add dev_name() to acpi_handle_info() logging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 05, 2023 at 11:30:09PM +0200, Hans de Goede wrote:
> acpi_handle_info() uses the ACPI path to the handle as prefix for messages
> e.g. : "\_SB_.I2C2.CAM8".
> 
> This makes it hard for users to figure out which csi2-bridge messages
> belong to which sensor since the actual sensor drivers uses the ACPI
> device name (typically "HID:00") for logging.
> 
> Extend the acpi_handle_info() (and err and warn) logging to also log
> the device name to make it easier to match csi2-bridge messages with
> sensor driver log messages.

Fine by me, one suggestion below (up to you, guys)
Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx>

> Suggested-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  .../media/atomisp/pci/atomisp_csi2_bridge.c   | 51 ++++++++++++-------
>  1 file changed, 34 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> index 551c6fd244fd..8124be486e2e 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_csi2_bridge.c
> @@ -131,7 +131,8 @@ static char *gmin_cfg_get_dsm(struct acpi_device *adev, const char *key)
>  			if (!val)
>  				break;
>  
> -			acpi_handle_info(adev->handle, "Using DSM entry %s=%s\n", key, val);
> +			acpi_handle_info(adev->handle, "%s: Using DSM entry %s=%s\n",
> +					 dev_name(&adev->dev), key, val);

Maybe (maybe!) it's a candidate to have something like

v4l2_acpi_log_info(adev, ...) which combines both and unloads the code from
thinking about it?

>  			break;
>  		}
>  	}
> @@ -156,7 +157,8 @@ static char *gmin_cfg_get_dmi_override(struct acpi_device *adev, const char *key
>  		if (strcmp(key, gv->key))
>  			continue;
>  
> -		acpi_handle_info(adev->handle, "Using DMI entry %s=%s\n", key, gv->val);
> +		acpi_handle_info(adev->handle, "%s: Using DMI entry %s=%s\n",
> +				 dev_name(&adev->dev), key, gv->val);
>  		return kstrdup(gv->val, GFP_KERNEL);
>  	}
>  
> @@ -192,7 +194,8 @@ static int gmin_cfg_get_int(struct acpi_device *adev, const char *key, int defau
>  	return int_val;
>  
>  out_use_default:
> -	acpi_handle_info(adev->handle, "Using default %s=%d\n", key, default_val);
> +	acpi_handle_info(adev->handle, "%s: Using default %s=%d\n",
> +			 dev_name(&adev->dev), key, default_val);
>  	return default_val;
>  }
>  
> @@ -235,7 +238,8 @@ static int atomisp_csi2_get_pmc_clk_nr_from_acpi_pr0(struct acpi_device *adev)
>  	ACPI_FREE(buffer.pointer);
>  
>  	if (ret < 0)
> -		acpi_handle_warn(adev->handle, "Could not find PMC clk in _PR0\n");
> +		acpi_handle_warn(adev->handle, "%s: Could not find PMC clk in _PR0\n",
> +				 dev_name(&adev->dev));
>  
>  	return ret;
>  }
> @@ -254,7 +258,8 @@ static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
>  	clk = clk_get(NULL, name);
>  	if (IS_ERR(clk)) {
>  		ret = PTR_ERR(clk);
> -		acpi_handle_err(adev->handle, "Error getting clk %s:%d\n", name, ret);
> +		acpi_handle_err(adev->handle, "%s: Error getting clk %s: %d\n",
> +				dev_name(&adev->dev), name, ret);
>  		return ret;
>  	}
>  
> @@ -268,7 +273,8 @@ static int atomisp_csi2_set_pmc_clk_freq(struct acpi_device *adev, int clock_num
>  	if (!ret)
>  		ret = clk_set_rate(clk, PMC_CLK_RATE_19_2MHZ);
>  	if (ret)
> -		acpi_handle_err(adev->handle, "Error setting clk-rate for %s:%d\n", name, ret);
> +		acpi_handle_err(adev->handle, "%s: Error setting clk-rate for %s: %d\n",
> +				dev_name(&adev->dev), name, ret);
>  
>  	clk_put(clk);
>  	return ret;
> @@ -317,7 +323,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>  
>  	if (i == data->settings_count) {
>  		acpi_handle_warn(data->adev->handle,
> -				 "Could not find DSM GPIO settings for pin %u\n", pin);
> +				 "%s: Could not find DSM GPIO settings for pin %u\n",
> +				 dev_name(&data->adev->dev), pin);
>  		return 1;
>  	}
>  
> @@ -329,7 +336,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>  		name = "powerdown-gpios";
>  		break;
>  	default:
> -		acpi_handle_warn(data->adev->handle, "Unknown GPIO type 0x%02lx for pin %u\n",
> +		acpi_handle_warn(data->adev->handle, "%s: Unknown GPIO type 0x%02lx for pin %u\n",
> +				 dev_name(&data->adev->dev),
>  				 INTEL_GPIO_DSM_TYPE(settings), pin);
>  		return 1;
>  	}
> @@ -354,7 +362,8 @@ static int atomisp_csi2_handle_acpi_gpio_res(struct acpi_resource *ares, void *_
>  	data->map->mapping[i].size = 1;
>  	data->map_count++;
>  
> -	acpi_handle_info(data->adev->handle, "%s crs %d %s pin %u active-%s\n", name,
> +	acpi_handle_info(data->adev->handle, "%s: %s crs %d %s pin %u active-%s\n",
> +			 dev_name(&data->adev->dev), name,
>  			 data->res_count - 1, agpio->resource_source.string_ptr,
>  			 pin, active_low ? "low" : "high");
>  
> @@ -391,7 +400,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  	obj = acpi_evaluate_dsm_typed(adev->handle, &intel_sensor_module_guid,
>  				      0x00, 1, NULL, ACPI_TYPE_STRING);
>  	if (obj) {
> -		acpi_handle_info(adev->handle, "Sensor module id: '%s'\n", obj->string.pointer);
> +		acpi_handle_info(adev->handle, "%s: Sensor module id: '%s'\n",
> +				 dev_name(&adev->dev), obj->string.pointer);
>  		ACPI_FREE(obj);
>  	}
>  
> @@ -405,7 +415,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  				      &intel_sensor_gpio_info_guid, 0x00, 1,
>  				      NULL, ACPI_TYPE_INTEGER);
>  	if (!obj) {
> -		acpi_handle_err(adev->handle, "No _DSM entry for GPIO pin count\n");
> +		acpi_handle_err(adev->handle, "%s: No _DSM entry for GPIO pin count\n",
> +				dev_name(&adev->dev));
>  		return -EIO;
>  	}
>  
> @@ -413,7 +424,9 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  	ACPI_FREE(obj);
>  
>  	if (data.settings_count > CSI2_MAX_ACPI_GPIOS) {
> -		acpi_handle_err(adev->handle, "Too many GPIOs %u > %u\n", data.settings_count, CSI2_MAX_ACPI_GPIOS);
> +		acpi_handle_err(adev->handle, "%s: Too many GPIOs %u > %u\n",
> +				dev_name(&adev->dev), data.settings_count,
> +				CSI2_MAX_ACPI_GPIOS);
>  		return -EOVERFLOW;
>  	}
>  
> @@ -427,7 +440,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  					      0x00, i + 2,
>  					      NULL, ACPI_TYPE_INTEGER);
>  		if (!obj) {
> -			acpi_handle_err(adev->handle, "No _DSM entry for pin %u\n", i);
> +			acpi_handle_err(adev->handle, "%s: No _DSM entry for pin %u\n",
> +					dev_name(&adev->dev), i);
>  			return -EIO;
>  		}
>  
> @@ -442,7 +456,8 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  			    INTEL_GPIO_DSM_PIN(data.settings[j]))
>  				continue;
>  
> -			acpi_handle_err(adev->handle, "Duplicate pin number %lu\n",
> +			acpi_handle_err(adev->handle, "%s: Duplicate pin number %lu\n",
> +					dev_name(&adev->dev),
>  					INTEL_GPIO_DSM_PIN(data.settings[i]));
>  			return -EIO;
>  		}
> @@ -463,12 +478,14 @@ static int atomisp_csi2_add_gpio_mappings(struct acpi_device *adev)
>  
>  	if (data.map_count != data.settings_count ||
>  	    data.res_count != data.settings_count)
> -		acpi_handle_warn(adev->handle, "ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
> -				 data.settings_count, data.res_count, data.map_count);
> +		acpi_handle_warn(adev->handle, "%s: ACPI GPIO resources vs DSM GPIO-info count mismatch (dsm: %d res: %d map %d\n",
> +				 dev_name(&adev->dev), data.settings_count,
> +				 data.res_count, data.map_count);
>  
>  	ret = acpi_dev_add_driver_gpios(adev, data.map->mapping);
>  	if (ret)
> -		acpi_handle_err(adev->handle, "Error adding driver GPIOs: %d\n", ret);
> +		acpi_handle_err(adev->handle, "%s: Error adding driver GPIOs: %d\n",
> +				dev_name(&adev->dev), ret);
>  
>  	return ret;
>  }
> -- 
> 2.41.0
> 

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux