Hi Hans, Thanks for the update. On Wed, Jul 05, 2023 at 11:30:06PM +0200, Hans de Goede wrote: > From: Daniel Scally <djrscally@xxxxxxxxx> > > Add a driver for the DW9719 VCM. The driver creates a v4l2 subdevice > and registers a control to set the desired focus. > > Signed-off-by: Daniel Scally <djrscally@xxxxxxxxx> > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > Changes in v3 (Hans de Goede) > - New patch in v3 of this series based on Dan Scally's initial > DW9719 upstream submission: > https://lore.kernel.org/all/20211128232115.38833-1-djrscally@xxxxxxxxx/ > - Drop hack to enable "vsio" regulator, this is no longer necessary > now that there is a device-link making the VCM a runtime-pm consumer > of the sensor > - Add checking of device-properties for sac-mode and vcm-freq, > as requested by Sakari, this is done similar to the dw9768: > Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml > Note no devicetree binding doc is added since currently only > i2c_device_id enumeration (instantiated by IPU bridge) is > supported > --- > MAINTAINERS | 7 + > drivers/media/i2c/Kconfig | 11 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/dw9719.c | 427 +++++++++++++++++++++++++++++++++++++ > 4 files changed, 446 insertions(+) > create mode 100644 drivers/media/i2c/dw9719.c > > diff --git a/MAINTAINERS b/MAINTAINERS > index 494682dd437f..cf8e799f6ea2 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -6266,6 +6266,13 @@ T: git git://linuxtv.org/media_tree.git > F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml > F: drivers/media/i2c/dw9714.c > > +DONGWOON DW9719 LENS VOICE COIL DRIVER > +M: Daniel Scally <djrscally@xxxxxxxxx> > +L: linux-media@xxxxxxxxxxxxxxx > +S: Maintained > +T: git git://linuxtv.org/media_tree.git > +F: drivers/media/i2c/dw9719.c > + > DONGWOON DW9768 LENS VOICE COIL DRIVER > L: linux-media@xxxxxxxxxxxxxxx > S: Orphan > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > index 26dc365365d8..4864f1df3c7a 100644 > --- a/drivers/media/i2c/Kconfig > +++ b/drivers/media/i2c/Kconfig > @@ -875,6 +875,17 @@ config VIDEO_DW9714 > capability. This is designed for linear control of > voice coil motors, controlled via I2C serial interface. > > +config VIDEO_DW9719 > + tristate "DW9719 lens voice coil support" > + depends on I2C && VIDEO_DEV > + select MEDIA_CONTROLLER > + select VIDEO_V4L2_SUBDEV_API > + select V4L2_ASYNC > + help > + This is a driver for the DW9719 camera lens voice coil. > + This is designed for linear control of voice coil motors, > + controlled via I2C serial interface. > + > config VIDEO_DW9768 > tristate "DW9768 lens voice coil support" > depends on I2C && VIDEO_DEV > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > index d175a2e2fb19..745f8d07e649 100644 > --- a/drivers/media/i2c/Makefile > +++ b/drivers/media/i2c/Makefile > @@ -32,6 +32,7 @@ obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o > obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o > obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o > obj-$(CONFIG_VIDEO_DW9714) += dw9714.o > +obj-$(CONFIG_VIDEO_DW9719) += dw9719.o > obj-$(CONFIG_VIDEO_DW9768) += dw9768.o > obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o > obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/ > diff --git a/drivers/media/i2c/dw9719.c b/drivers/media/i2c/dw9719.c > new file mode 100644 > index 000000000000..7b83ae102131 > --- /dev/null > +++ b/drivers/media/i2c/dw9719.c > @@ -0,0 +1,427 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2012 Intel Corporation > + > +/* > + * Based on linux/modules/camera/drivers/media/i2c/imx/dw9719.c in this repo: > + * https://github.com/ZenfoneArea/android_kernel_asus_zenfone5 > + */ > + > +#include <asm/unaligned.h> > + > +#include <linux/delay.h> > +#include <linux/i2c.h> > +#include <linux/pm_runtime.h> > +#include <linux/regulator/consumer.h> > +#include <linux/types.h> > + > +#include <media/v4l2-common.h> > +#include <media/v4l2-ctrls.h> > +#include <media/v4l2-subdev.h> > + > +#define DW9719_MAX_FOCUS_POS 1023 > +#define DW9719_CTRL_STEPS 16 > +#define DW9719_CTRL_DELAY_US 1000 > +#define DELAY_MAX_PER_STEP_NS (1000000 * 1023) > + > +#define DW9719_INFO 0 > +#define DW9719_ID 0xF1 > +#define DW9719_CONTROL 2 > +#define DW9719_VCM_CURRENT 3 > + > +#define DW9719_MODE 6 > +#define DW9719_VCM_FREQ 7 > + > +#define DW9719_MODE_SAC_SHIFT 4 > +#define DW9719_MODE_SAC3 4 > + > +#define DW9719_DEFAULT_VCM_FREQ 0x60 > + > +#define DW9719_ENABLE_RINGING 0x02 > + > +#define to_dw9719_device(x) container_of(x, struct dw9719_device, sd) > + > +struct dw9719_device { > + struct device *dev; > + struct i2c_client *client; > + struct regulator *regulator; > + struct v4l2_subdev sd; > + u32 sac_mode; > + u32 vcm_freq; > + > + struct dw9719_v4l2_ctrls { > + struct v4l2_ctrl_handler handler; > + struct v4l2_ctrl *focus; > + } ctrls; > +}; > + > +static int dw9719_i2c_rd8(struct i2c_client *client, u8 reg, u8 *val) > +{ > + struct i2c_msg msg[2]; > + u8 buf[2] = { reg }; > + int ret; > + > + msg[0].addr = client->addr; > + msg[0].flags = 0; > + msg[0].len = 1; > + msg[0].buf = buf; > + > + msg[1].addr = client->addr; > + msg[1].flags = I2C_M_RD; > + msg[1].len = 1; > + msg[1].buf = &buf[1]; > + *val = 0; > + > + ret = i2c_transfer(client->adapter, msg, 2); > + if (ret < 0) > + return ret; > + > + *val = buf[1]; > + > + return 0; > +} > + > +static int dw9719_i2c_wr8(struct i2c_client *client, u8 reg, u8 val) > +{ > + struct i2c_msg msg; > + int ret; > + > + u8 buf[2] = { reg, val }; > + > + msg.addr = client->addr; > + msg.flags = 0; > + msg.len = sizeof(buf); > + msg.buf = buf; > + > + ret = i2c_transfer(client->adapter, &msg, 1); > + > + return ret < 0 ? ret : 0; > +} > + > +static int dw9719_i2c_wr16(struct i2c_client *client, u8 reg, u16 val) > +{ > + struct i2c_msg msg; > + u8 buf[3] = { reg }; > + int ret; > + > + put_unaligned_be16(val, buf + 1); > + > + msg.addr = client->addr; > + msg.flags = 0; > + msg.len = sizeof(buf); > + msg.buf = buf; > + > + ret = i2c_transfer(client->adapter, &msg, 1); > + > + return ret < 0 ? ret : 0; > +} Seems like a use case for the new CCI register access framework. :-) Doesn't need to be on this set, though: there are lot of other drivers that could be converted as well. > + > +static int dw9719_detect(struct dw9719_device *dw9719) > +{ > + int ret; > + u8 val; > + > + ret = dw9719_i2c_rd8(dw9719->client, DW9719_INFO, &val); > + if (ret < 0) > + return ret; > + > + if (val != DW9719_ID) { > + dev_err(dw9719->dev, "Failed to detect correct id\n"); > + ret = -ENXIO; > + } > + > + return 0; > +} > + > +static int dw9719_power_down(struct dw9719_device *dw9719) > +{ > + return regulator_disable(dw9719->regulator); > +} > + > +static int dw9719_power_up(struct dw9719_device *dw9719) > +{ > + int ret; > + > + ret = regulator_enable(dw9719->regulator); > + if (ret) > + return ret; > + > + /* Jiggle SCL pin to wake up device */ > + ret = dw9719_i2c_wr8(dw9719->client, DW9719_CONTROL, 1); > + > + /* Need 100us to transit from SHUTDOWN to STANDBY*/ > + usleep_range(100, 1000); > + > + ret = dw9719_i2c_wr8(dw9719->client, DW9719_CONTROL, > + DW9719_ENABLE_RINGING); > + if (ret < 0) > + goto fail_powerdown; > + > + ret = dw9719_i2c_wr8(dw9719->client, DW9719_MODE, > + dw9719->sac_mode << DW9719_MODE_SAC_SHIFT); > + if (ret < 0) > + goto fail_powerdown; > + > + ret = dw9719_i2c_wr8(dw9719->client, DW9719_VCM_FREQ, dw9719->vcm_freq); > + if (ret < 0) > + goto fail_powerdown; > + > + return 0; > + > +fail_powerdown: > + dw9719_power_down(dw9719); > + return ret; > +} > + > +static int dw9719_t_focus_abs(struct dw9719_device *dw9719, s32 value) > +{ > + int ret; > + > + value = clamp(value, 0, DW9719_MAX_FOCUS_POS); > + ret = dw9719_i2c_wr16(dw9719->client, DW9719_VCM_CURRENT, value); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int dw9719_set_ctrl(struct v4l2_ctrl *ctrl) > +{ > + struct dw9719_device *dw9719 = container_of(ctrl->handler, > + struct dw9719_device, > + ctrls.handler); > + int ret; > + > + /* Only apply changes to the controls if the device is powered up */ > + if (!pm_runtime_get_if_in_use(dw9719->dev)) > + return 0; > + > + switch (ctrl->id) { > + case V4L2_CID_FOCUS_ABSOLUTE: > + ret = dw9719_t_focus_abs(dw9719, ctrl->val); > + break; > + default: > + ret = -EINVAL; > + } > + > + pm_runtime_put(dw9719->dev); > + > + return ret; > +} > + > +static const struct v4l2_ctrl_ops dw9719_ctrl_ops = { > + .s_ctrl = dw9719_set_ctrl, > +}; > + > +static int __maybe_unused dw9719_suspend(struct device *dev) > +{ > + struct v4l2_subdev *sd = dev_get_drvdata(dev); > + struct dw9719_device *dw9719 = to_dw9719_device(sd); > + int ret; > + int val; > + > + for (val = dw9719->ctrls.focus->val; val >= 0; > + val -= DW9719_CTRL_STEPS) { > + ret = dw9719_t_focus_abs(dw9719, val); > + if (ret) > + return ret; > + > + usleep_range(DW9719_CTRL_DELAY_US, DW9719_CTRL_DELAY_US + 10); > + } > + > + return dw9719_power_down(dw9719); > +} > + > +static int __maybe_unused dw9719_resume(struct device *dev) > +{ > + struct v4l2_subdev *sd = dev_get_drvdata(dev); > + struct dw9719_device *dw9719 = to_dw9719_device(sd); > + int current_focus = dw9719->ctrls.focus->val; > + int ret; > + int val; > + > + ret = dw9719_power_up(dw9719); > + if (ret) > + return ret; > + > + for (val = current_focus % DW9719_CTRL_STEPS; val < current_focus; > + val += DW9719_CTRL_STEPS) { > + ret = dw9719_t_focus_abs(dw9719, val); > + if (ret) > + goto err_power_down; > + > + usleep_range(DW9719_CTRL_DELAY_US, DW9719_CTRL_DELAY_US + 10); > + } > + > + return 0; > + > +err_power_down: > + dw9719_power_down(dw9719); > + return ret; > +} > + > +static int dw9719_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > +{ > + return pm_runtime_resume_and_get(sd->dev); > +} > + > +static int dw9719_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) > +{ > + pm_runtime_put(sd->dev); > + > + return 0; > +} > + > +static const struct v4l2_subdev_internal_ops dw9719_internal_ops = { > + .open = dw9719_open, > + .close = dw9719_close, > +}; > + > +static int dw9719_init_controls(struct dw9719_device *dw9719) > +{ > + const struct v4l2_ctrl_ops *ops = &dw9719_ctrl_ops; > + int ret; > + > + ret = v4l2_ctrl_handler_init(&dw9719->ctrls.handler, 1); > + if (ret) > + return ret; This check can be dropped. > + > + dw9719->ctrls.focus = v4l2_ctrl_new_std(&dw9719->ctrls.handler, ops, > + V4L2_CID_FOCUS_ABSOLUTE, 0, > + DW9719_MAX_FOCUS_POS, 1, 0); > + > + if (dw9719->ctrls.handler.error) { > + dev_err(dw9719->dev, "Error initialising v4l2 ctrls\n"); > + ret = dw9719->ctrls.handler.error; > + goto err_free_handler; > + } > + > + dw9719->sd.ctrl_handler = &dw9719->ctrls.handler; > + > + return ret; > + > +err_free_handler: > + v4l2_ctrl_handler_free(&dw9719->ctrls.handler); > + return ret; > +} > + > +static const struct v4l2_subdev_ops dw9719_ops = { }; > + > +static int dw9719_probe(struct i2c_client *client) > +{ > + struct dw9719_device *dw9719; > + int ret; > + > + dw9719 = devm_kzalloc(&client->dev, sizeof(*dw9719), GFP_KERNEL); > + if (!dw9719) > + return -ENOMEM; > + > + dw9719->client = client; > + dw9719->dev = &client->dev; > + > + dw9719->sac_mode = DW9719_MODE_SAC3; > + dw9719->vcm_freq = DW9719_DEFAULT_VCM_FREQ; > + > + /* Optional indication of SAC mode select */ > + device_property_read_u32(&client->dev, "dongwoon,sac-mode", > + &dw9719->sac_mode); > + > + /* Optional indication of VCM frequency */ > + device_property_read_u32(&client->dev, "dongwoon,vcm-freq", > + &dw9719->vcm_freq); > + > + dw9719->regulator = devm_regulator_get(&client->dev, "vdd"); > + if (IS_ERR(dw9719->regulator)) > + return dev_err_probe(&client->dev, PTR_ERR(dw9719->regulator), > + "getting regulator\n"); > + > + v4l2_i2c_subdev_init(&dw9719->sd, client, &dw9719_ops); > + dw9719->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + dw9719->sd.internal_ops = &dw9719_internal_ops; > + > + ret = dw9719_init_controls(dw9719); > + if (ret) > + return ret; > + > + ret = media_entity_pads_init(&dw9719->sd.entity, 0, NULL); > + if (ret < 0) > + goto err_free_ctrl_handler; > + > + dw9719->sd.entity.function = MEDIA_ENT_F_LENS; > + > + /* > + * We need the driver to work in the event that pm runtime is disable in > + * the kernel, so power up and verify the chip now. In the event that > + * runtime pm is disabled this will leave the chip on, so that the lens > + * will work. > + */ > + > + ret = dw9719_power_up(dw9719); > + if (ret) > + goto err_cleanup_media; > + > + ret = dw9719_detect(dw9719); > + if (ret) > + goto err_powerdown; > + > + pm_runtime_set_active(&client->dev); > + pm_runtime_get_noresume(&client->dev); > + pm_runtime_enable(&client->dev); > + > + ret = v4l2_async_register_subdev(&dw9719->sd); > + if (ret < 0) > + goto err_pm_runtime; > + > + pm_runtime_set_autosuspend_delay(&client->dev, 1000); > + pm_runtime_use_autosuspend(&client->dev); > + pm_runtime_put_autosuspend(&client->dev); > + > + return ret; > + > +err_pm_runtime: > + pm_runtime_disable(&client->dev); > + pm_runtime_put_noidle(&client->dev); > +err_powerdown: > + dw9719_power_down(dw9719); > +err_cleanup_media: > + media_entity_cleanup(&dw9719->sd.entity); > +err_free_ctrl_handler: > + v4l2_ctrl_handler_free(&dw9719->ctrls.handler); > + > + return ret; > +} > + > +static void dw9719_remove(struct i2c_client *client) > +{ > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > + struct dw9719_device *dw9719 = container_of(sd, struct dw9719_device, sd); No need for such a long line. > + > + pm_runtime_disable(&client->dev); > + v4l2_async_unregister_subdev(sd); > + v4l2_ctrl_handler_free(&dw9719->ctrls.handler); > + media_entity_cleanup(&dw9719->sd.entity); Missing call to dw9719_power_down(). I can address these while applying (assuming that's all in terms of changes needed). > +} > + > +static const struct i2c_device_id dw9719_id_table[] = { > + { "dw9719" }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, dw9719_id_table); > + > +static const struct dev_pm_ops dw9719_pm_ops = { > + SET_RUNTIME_PM_OPS(dw9719_suspend, dw9719_resume, NULL) > +}; > + > +static struct i2c_driver dw9719_i2c_driver = { > + .driver = { > + .name = "dw9719", > + .pm = &dw9719_pm_ops, > + }, > + .probe_new = dw9719_probe, > + .remove = dw9719_remove, > + .id_table = dw9719_id_table, > +}; > +module_i2c_driver(dw9719_i2c_driver); > + > +MODULE_AUTHOR("Daniel Scally <djrscally@xxxxxxxxx>"); > +MODULE_DESCRIPTION("DW9719 VCM Driver"); > +MODULE_LICENSE("GPL"); -- Kind regards, Sakari Ailus
