From: Hans de Goede <hdegoede@xxxxxxxxxx>
[ Upstream commit f91280f35895d6dcb53f504968fafd1da0b00397 ]
The Lenovo Yoga Book yb1-x90f/l 2-in-1 which ships with Android as
Factory OS has (another) bug in its DSDT where the UART resource for
the BTH0 ACPI device contains "\\_SB.PCIO.URT1" as path to the UART.
Note that is with a letter 'O' instead of the number '0' which is wrong.
This causes Linux to instantiate a standard /dev/ttyS? device for
the UART instead of a /sys/bus/serial device, which in turn causes
bluetooth to not work.
Similar DSDT bugs have been encountered before and to work around those
the acpi_quirk_skip_serdev_enumeration() helper exists.
Previous devices had the broken resource pointing to the first UART, while
the BT HCI was on the second UART, which ACPI_QUIRK_UART1_TTY_UART2_SKIP
deals with. Add a new ACPI_QUIRK_UART1_SKIP quirk for skipping enumeration
of UART1 instead for the Yoga Book case and add this quirk to the
existing DMI quirk table entry for the yb1-x90f/l .
This leaves the UART1 controller unbound allowing the x86-android-tablets
module to manually instantiate a serdev for it fixing bluetooth.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/acpi/x86/utils.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index 436dccdce8275..2b3e32764a758 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -249,10 +249,11 @@ bool force_storage_d3(void)
* drivers/platform/x86/x86-android-tablets.c kernel module.
*/
#define ACPI_QUIRK_SKIP_I2C_CLIENTS BIT(0)
-#define ACPI_QUIRK_UART1_TTY_UART2_SKIP BIT(1)
-#define ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY BIT(2)
-#define ACPI_QUIRK_USE_ACPI_AC_AND_BATTERY BIT(3)
-#define ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS BIT(4)
+#define ACPI_QUIRK_UART1_SKIP BIT(1)
+#define ACPI_QUIRK_UART1_TTY_UART2_SKIP BIT(2)
+#define ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY BIT(3)
+#define ACPI_QUIRK_USE_ACPI_AC_AND_BATTERY BIT(4)
+#define ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS BIT(5)
static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
/*
@@ -309,6 +310,7 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"),
},
.driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS |
+ ACPI_QUIRK_UART1_SKIP |
ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY |
ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS),
},
@@ -439,6 +441,9 @@ int acpi_quirk_skip_serdev_enumeration(struct device *controller_parent, bool *s
if (dmi_id)
quirks = (unsigned long)dmi_id->driver_data;
+ if ((quirks & ACPI_QUIRK_UART1_SKIP) && uid == 1)
+ *skip = true;
+
if (quirks & ACPI_QUIRK_UART1_TTY_UART2_SKIP) {
if (uid == 1)
return -ENODEV; /* Create tty cdev instead of serdev */
--
2.39.2
