Re: [PATCH v2] ACPI: resource: Remove "Zen" specific match and quirks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 18, 2023 at 8:39 PM Mario Limonciello
<mario.limonciello@xxxxxxx> wrote:
>
> commit 9946e39fe8d0 ("ACPI: resource: skip IRQ override on
> AMD Zen platforms") attempted to overhaul the override logic so it
> didn't apply on X86 AMD Zen systems.  This was intentional so that
> systems would prefer DSDT values instead of default MADT value for
> IRQ 1 on Ryzen 6000 systems which use ActiveLow for IRQ1.
>
> This turned out to be a bad assumption because several vendors seem
> to add Interrupt Source Override but don't fix the DSDT. A pile of
> quirks was collecting that proved this wasn't sustaintable.
>
> Adjust the logic so that only IRQ1 is overridden in Ryzen 6000 case.
>
> This effectively reverts the following commits:
> commit 17bb7046e7ce ("ACPI: resource: Do IRQ override on all TongFang
> GMxRGxx")
> commit f3cb9b740869 ("ACPI: resource: do IRQ override on Lenovo 14ALC7")
> commit bfcdf58380b1 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
> commit 7592b79ba4a9 ("ACPI: resource: do IRQ override on XMG Core 15")

Should it also remove the quirk added by commit 71a485624c4c ("ACPI:
resource: Add IRQ override quirk for LG UltraPC 17U70P")?

> Cc: ofenfisch@xxxxxxxxxxxxxx
> Cc: wse@xxxxxxxxxxxxxxxxxxx
> Cc: adam.niederer@xxxxxxxxx
> Cc: adrian@xxxxxxxxx
> Cc: jirislaby@xxxxxxxxxx
> Tested-by: Renjith.Pananchikkal@xxxxxxx
> Tested-by: anson.tsao@xxxxxxx
> Tested-by: Richard.Gong@xxxxxxx
> Tested-by: Chuanhong Guo <gch981213@xxxxxxxxx>
> Reported-by: evilsnoo@xxxxxxxxx
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217394
> Reported-by: ruinairas1992@xxxxxxxxx
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217406
> Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
> Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> ---
> v1->v2:
>  * Rebase on 71a485624c4c ("ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70P")
>  * Pick up tag
> ---
>  drivers/acpi/resource.c | 154 +++++++++++++++++-----------------------
>  1 file changed, 65 insertions(+), 89 deletions(-)
>
> diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
> index 0800a9d77558..c6ac87e01e1c 100644
> --- a/drivers/acpi/resource.c
> +++ b/drivers/acpi/resource.c
> @@ -470,52 +470,6 @@ static const struct dmi_system_id asus_laptop[] = {
>         { }
>  };
>
> -static const struct dmi_system_id lenovo_laptop[] = {
> -       {
> -               .ident = "LENOVO IdeaPad Flex 5 14ALC7",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "82R9"),
> -               },
> -       },
> -       {
> -               .ident = "LENOVO IdeaPad Flex 5 16ALC7",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "82RA"),
> -               },
> -       },
> -       { }
> -};
> -
> -static const struct dmi_system_id tongfang_gm_rg[] = {
> -       {
> -               .ident = "TongFang GMxRGxx/XMG CORE 15 (M22)/TUXEDO Stellaris 15 Gen4 AMD",
> -               .matches = {
> -                       DMI_MATCH(DMI_BOARD_NAME, "GMxRGxx"),
> -               },
> -       },
> -       { }
> -};
> -
> -static const struct dmi_system_id maingear_laptop[] = {
> -       {
> -               .ident = "MAINGEAR Vector Pro 2 15",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "Micro Electronics Inc"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "MG-VCP2-15A3070T"),
> -               }
> -       },
> -       {
> -               .ident = "MAINGEAR Vector Pro 2 17",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "Micro Electronics Inc"),
> -                       DMI_MATCH(DMI_PRODUCT_NAME, "MG-VCP2-17A3070T"),
> -               },
> -       },
> -       { }
> -};
> -
>  static const struct dmi_system_id lg_laptop[] = {
>         {
>                 .ident = "LG Electronics 17U70P",
> @@ -527,7 +481,7 @@ static const struct dmi_system_id lg_laptop[] = {
>         { }
>  };
>
> -struct irq_override_cmp {
> +struct irq_override_dmi_cmp {
>         const struct dmi_system_id *system;
>         unsigned char irq;
>         unsigned char triggering;
> @@ -536,50 +490,86 @@ struct irq_override_cmp {
>         bool override;
>  };
>
> -static const struct irq_override_cmp override_table[] = {
> +struct irq_override_acpi_cmp {
> +       const char *id;
> +       unsigned char irq;
> +       unsigned char triggering;
> +       unsigned char polarity;
> +};
> +
> +static const struct irq_override_dmi_cmp dmi_override_table[] = {
>         { medion_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
>         { asus_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
> -       { lenovo_laptop, 6, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
> -       { lenovo_laptop, 10, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, true },
> -       { tongfang_gm_rg, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
> -       { maingear_laptop, 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW, 1, true },
>         { lg_laptop, 1, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW, 0, false },
>  };
>
> -static bool acpi_dev_irq_override(u32 gsi, u8 triggering, u8 polarity,
> -                                 u8 shareable)
> +/*
> + * Ryzen 6000 requires ActiveLow for keyboard, but a number of machines
> + * seem to get it wrong in DSDT or don't have an Interrupt Source
> + * Override.
> + */
> +static const struct irq_override_acpi_cmp acpi_override_table[] = {
> +       { "AMDI0007", 1, ACPI_EDGE_SENSITIVE, ACPI_ACTIVE_LOW },
> +};
> +
> +static void acpi_dev_irq_override(u32 gsi, u8 *triggering, u8 *polarity,
> +                                 u8 *shareable)
>  {
> -       int i;
> +       int i, p, t;
> +       int check_override = true;
>
> -       for (i = 0; i < ARRAY_SIZE(override_table); i++) {
> -               const struct irq_override_cmp *entry = &override_table[i];
> +       for (i = 0; i < ARRAY_SIZE(dmi_override_table); i++) {
> +               const struct irq_override_dmi_cmp *entry = &dmi_override_table[i];
>
>                 if (dmi_check_system(entry->system) &&
>                     entry->irq == gsi &&
> -                   entry->triggering == triggering &&
> -                   entry->polarity == polarity &&
> -                   entry->shareable == shareable)
> -                       return entry->override;
> +                   entry->triggering == *triggering &&
> +                   entry->polarity == *polarity &&
> +                   entry->shareable == *shareable)
> +                       check_override = entry->override;
>         }
>
> -#ifdef CONFIG_X86
> -       /*
> -        * IRQ override isn't needed on modern AMD Zen systems and
> -        * this override breaks active low IRQs on AMD Ryzen 6000 and
> -        * newer systems. Skip it.
> -        */
> -       if (boot_cpu_has(X86_FEATURE_ZEN))
> -               return false;
> -#endif
> +       if (!check_override)
> +               return;
>
> -       return true;
> +       if (!acpi_get_override_irq(gsi, &t, &p)) {
> +               u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
> +               u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> +
> +               if (*triggering != trig || *polarity != pol) {
> +                       pr_warn("ACPI: IRQ %d override to %s%s, %s%s\n", gsi,
> +                               t ? "level" : "edge",
> +                               trig == *triggering ? "" : "(!)",
> +                               p ? "low" : "high",
> +                               pol == *polarity ? "" : "(!)");
> +                       *triggering = trig;
> +                       *polarity = pol;
> +               }
> +       }
> +
> +       for (i = 0; i < ARRAY_SIZE(acpi_override_table); i++) {
> +               const struct irq_override_acpi_cmp *entry = &acpi_override_table[i];
> +
> +               if (acpi_dev_found(entry->id) && gsi == entry->irq &&
> +                  (*polarity != entry->polarity || *triggering != entry->triggering)) {
> +                       pr_warn("ACPI: IRQ %d override to %s%s, %s%s due to %s\n",
> +                               gsi,
> +                               entry->triggering ? "level" : "edge",
> +                               entry->triggering == *triggering ? "" : "(!)",
> +                               entry->polarity ? "low" : "high",
> +                               entry->polarity == *polarity ? "" : "(!)",
> +                               entry->id);
> +                       *polarity = entry->polarity;
> +                       *triggering = entry->triggering;
> +               }
> +       }
>  }
>
>  static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
>                                      u8 triggering, u8 polarity, u8 shareable,
>                                      u8 wake_capable, bool check_override)
>  {
> -       int irq, p, t;
> +       int irq;
>
>         if (!valid_IRQ(gsi)) {
>                 irqresource_disabled(res, gsi);
> @@ -592,26 +582,12 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
>          * 2. BIOS uses IO-APIC mode Interrupt Source Override
>          *
>          * We do this only if we are dealing with IRQ() or IRQNoFlags()
> -        * resource (the legacy ISA resources). With modern ACPI 5 devices
> +        * resource (the legacy ISA resources). With ACPI devices
>          * using extended IRQ descriptors we take the IRQ configuration
>          * from _CRS directly.
>          */
> -       if (check_override &&
> -           acpi_dev_irq_override(gsi, triggering, polarity, shareable) &&
> -           !acpi_get_override_irq(gsi, &t, &p)) {
> -               u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
> -               u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
> -
> -               if (triggering != trig || polarity != pol) {
> -                       pr_warn("ACPI: IRQ %d override to %s%s, %s%s\n", gsi,
> -                               t ? "level" : "edge",
> -                               trig == triggering ? "" : "(!)",
> -                               p ? "low" : "high",
> -                               pol == polarity ? "" : "(!)");
> -                       triggering = trig;
> -                       polarity = pol;
> -               }
> -       }
> +       if (check_override)
> +               acpi_dev_irq_override(gsi, &triggering, &polarity, &shareable);
>
>         res->flags = acpi_dev_irq_flags(triggering, polarity, shareable, wake_capable);
>         irq = acpi_register_gsi(NULL, gsi, triggering, polarity);
>
> base-commit: c554eee18c9a440bd2dd5a363b0f79325717f0bf
> --
> 2.34.1
>



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux