On Fri, Mar 31, 2023 at 05:11:39PM +0800, Pin-yen Lin wrote: > Analogix 7625 can be used in systems to switch the DP traffic between > two downstreams, which can be USB Type-C DisplayPort alternate mode > lane or regular DisplayPort output ports. > > Update the binding to accommodate this usage by introducing a > data-lanes and a mode-switch property on endpoints. > > Also include the link to the product brief in the bindings. > > Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > Reviewed-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> > Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > > --- > > (no changes since v12) > > Changes in v12: > - Removed the 4-lane binding in analogix,anx7625.yaml > - Reworded the description for the mode-switch property > > Changes in v11: > - Updated the description of the endpoints > - Referenced video-interfaces.yaml instead for the endpoints > > Changes in v10: > - Collected Reviewed-by and Tested-by tags > > Changes in v9: > - Collected Reviewed-by tag > > Changes in v8: > - Updated anx7625 bindings for data-lane property > - Fixed the subject prefix > > Changes in v7: > - Fixed issues reported by dt_binding_check > - Updated the schema and the example dts for data-lanes. > - Changed to generic naming for the example dts node. > > Changes in v6: > - Remove switches node and use endpoints and data-lanes property to > describe the connections. > > .../display/bridge/analogix,anx7625.yaml | 88 ++++++++++++++++++- > 1 file changed, 85 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > index b42553ac505c..604c7391d74f 100644 > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml > @@ -12,7 +12,8 @@ maintainers: > > description: | > The ANX7625 is an ultra-low power 4K Mobile HD Transmitter > - designed for portable devices. > + designed for portable devices. Product brief is available at > + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf > > properties: > compatible: > @@ -112,9 +113,40 @@ properties: > data-lanes: true > > port@1: > - $ref: /schemas/graph.yaml#/properties/port > + $ref: /schemas/graph.yaml#/$defs/port-base > description: > - Video port for panel or connector. > + Video port for panel or connector. Each endpoint connects to a video > + output downstream, and the "data-lanes" property is used to describe > + the pin connections. 0, 1, 2, 3 in "data-lanes" maps to SSRX1, SSTX1, > + SSRX2, SSTX2, respectively. > + > + patternProperties: > + "^endpoint@[01]$": > + $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false > + properties: > + reg: true > + > + remote-endpoint: true Don't need to list these 2. > + > + data-lanes: > + oneOf: > + - items: > + - enum: [0, 1, 2, 3] > + > + - items: > + - const: 0 > + - const: 1 > + > + - items: > + - const: 2 > + - const: 3 > + > + mode-switch: > + type: boolean > + description: Serves as Type-C mode switch if present. > + > + required: > + - remote-endpoint Don't need required. > > required: > - port@0 > @@ -186,3 +218,53 @@ examples: > }; > }; > }; > + - | > + i2c3 { i2c-3 But better yet, just expand the existing example rather than a whole new one. > + #address-cells = <1>; > + #size-cells = <0>; > + > + encoder@58 { > + compatible = "analogix,anx7625"; > + reg = <0x58>; > + pinctrl-names = "default"; > + pinctrl-0 = <&anx7625_dp_pins>; > + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; > + vdd10-supply = <&pp1100_dpbrdg>; > + vdd18-supply = <&pp1800_dpbrdg_dx>; > + vdd33-supply = <&pp3300_dpbrdg_dx>; > + analogix,audio-enable; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + anx7625_dp_in: endpoint { > + bus-type = <7>; > + remote-endpoint = <&dpi_out>; > + }; > + }; > + > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <1>; > + anx_typec0: endpoint@0 { > + reg = <0>; > + mode-switch; > + data-lanes = <0 1>; > + remote-endpoint = <&typec_port0>; > + }; > + anx_typec1: endpoint@1 { > + reg = <1>; > + mode-switch; > + data-lanes = <2 3>; > + remote-endpoint = <&typec_port1>; > + }; > + }; > + }; > + }; > + }; > -- > 2.40.0.348.gf938b09366-goog >
