Re: [PATCH 00/12] Rework PHY reset handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Florian,

On 23-04-05, Florian Fainelli wrote:
> Hi Marco,
> 
> On 4/5/2023 2:26 AM, Marco Felsch wrote:
> > The current phy reset handling is broken in a way that it needs
> > pre-running firmware to setup the phy initially. Since the very first
> > step is to readout the PHYID1/2 registers before doing anything else.
> > 
> > The whole dection logic will fall apart if the pre-running firmware
> > don't setup the phy accordingly or the kernel boot resets GPIOs states
> > or disables clocks. In such cases the PHYID1/2 read access will fail and
> > so the whole detection will fail.
> 
> PHY reset is a bit too broad and should need some clarifications between:
> 
> - external reset to the PHY whereby a hardware pin on the PHY IC may be used
> 
> - internal reset to the PHY whereby we call into the PHY driver soft_reset
> function to have the PHY software reset itself
> 
> You are changing the way the former happens, not the latter, at least not
> changing the latter intentionally if at all.

Yes.

> This is important because your cover letter will be in the merge commit in
> the networking tree.

Ah okay, I didn't know that. I will adapt the cover letter accordingly.

> Will do a more thorough review on a patch by patch basis. Thanks.

Thanks a lot, looking forward to it.

Regards,
  Marco



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux