[PATCH] perf/arm-cmn: fix regitster offset of CMN_MXP__CONNECT_INFO_P2-5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the CMN700 specification, it is described that the address offset
of the mxp_device_connect_info_p0-5 register is 16'h8 + #{8*index}.
Therefore, the address offset of the CMN_MXP__CONNECT_INFO_P2-5 macro
defined in the code is wrong, which causes the cmn700 topology map
incorrect printed in debugfs.

So correct the address offset value to make the cmn700 topology map
correct in debugfs.

Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Signed-off-by: Jing Zhang <renyu.zj@xxxxxxxxxxxxxxxxx>
Signed-off-by: Ruidong Tian <tianruidong@xxxxxxxxxxxxxxxxx>
---
 drivers/perf/arm-cmn.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
index 1deb61b..e9f844b 100644
--- a/drivers/perf/arm-cmn.c
+++ b/drivers/perf/arm-cmn.c
@@ -59,10 +59,10 @@
 /* XPs also have some local topology info which has uses too */
 #define CMN_MXP__CONNECT_INFO_P0	0x0008
 #define CMN_MXP__CONNECT_INFO_P1	0x0010
-#define CMN_MXP__CONNECT_INFO_P2	0x0028
-#define CMN_MXP__CONNECT_INFO_P3	0x0030
-#define CMN_MXP__CONNECT_INFO_P4	0x0038
-#define CMN_MXP__CONNECT_INFO_P5	0x0040
+#define CMN_MXP__CONNECT_INFO_P2	0x0018
+#define CMN_MXP__CONNECT_INFO_P3	0x0020
+#define CMN_MXP__CONNECT_INFO_P4	0x0028
+#define CMN_MXP__CONNECT_INFO_P5	0x0030
 #define CMN__CONNECT_INFO_DEVICE_TYPE	GENMASK_ULL(4, 0)
 
 /* PMU registers occupy the 3rd 4KB page of each node's region */
-- 
1.8.3.1




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux