On Mon, Mar 27, 2023 at 08:25:04PM +0800, lihuisong (C) wrote:
>
> 在 2023/3/27 19:30, Sudeep Holla 写道:
> > On Tue, Mar 14, 2023 at 07:11:34PM +0800, Huisong Li wrote:
> > > Currently, PCC driver doesn't support the processing of platform
> > > notification for type 4 PCC subspaces.
> > >
> > > According to ACPI specification, if platform sends a notification
> > > to OSPM, it must clear the command complete bit and trigger platform
> > > interrupt. OSPM needs to check whether the command complete bit is
> > > cleared, clear platform interrupt, process command, and then set the
> > > command complete and ring doorbell to the Platform.
> > >
> > > Let us stash the value of the pcc type and use the same while processing
> > > the interrupt of the channel. We also need to set the command complete
> > > bit and ring doorbell in the interrupt handler for the type 4 channel to
> > > complete the communication flow after processing the notification from
> > > the Platform.
> > >
> > > Signed-off-by: Huisong Li <lihuisong@xxxxxxxxxx>
> > > ---
> > > drivers/mailbox/pcc.c | 50 +++++++++++++++++++++++++++++++++++--------
> > > 1 file changed, 41 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
> > > index 105d46c9801b..a0a87c480d8b 100644
> > > --- a/drivers/mailbox/pcc.c
> > > +++ b/drivers/mailbox/pcc.c
> > > @@ -91,6 +91,7 @@ struct pcc_chan_reg {
> > > * @cmd_update: PCC register bundle for the command complete update register
> > > * @error: PCC register bundle for the error status register
> > > * @plat_irq: platform interrupt
> > > + * @type: PCC subspace type
> > > */
> > > struct pcc_chan_info {
> > > struct pcc_mbox_chan chan;
> > > @@ -100,12 +101,15 @@ struct pcc_chan_info {
> > > struct pcc_chan_reg cmd_update;
> > > struct pcc_chan_reg error;
> > > int plat_irq;
> > > + u8 type;
> > > };
> > > #define to_pcc_chan_info(c) container_of(c, struct pcc_chan_info, chan)
> > > static struct pcc_chan_info *chan_info;
> > > static int pcc_chan_count;
> > > +static int pcc_send_data(struct mbox_chan *chan, void *data);
> > > +
> > > /*
> > > * PCC can be used with perf critical drivers such as CPPC
> > > * So it makes sense to locally cache the virtual address and
> > > @@ -221,6 +225,34 @@ static int pcc_map_interrupt(u32 interrupt, u32 flags)
> > > return acpi_register_gsi(NULL, interrupt, trigger, polarity);
> > > }
> > > +static bool pcc_mbox_cmd_complete_check(struct pcc_chan_info *pchan)
> > > +{
> > > + u64 val;
> > > + int ret;
> > > +
> > > + ret = pcc_chan_reg_read(&pchan->cmd_complete, &val);
> > > + if (ret)
> > > + return false;
> > > +
> > > + if (!pchan->cmd_complete.gas)
> > > + return true;
> > > +
> > > + /*
> > > + * Judge if the channel respond the interrupt based on the value of
> > > + * command complete.
> > > + */
> > > + val &= pchan->cmd_complete.status_mask;
> > [super nit] Would prefer an blank line here.
> >
> Yeah, it would be better if there is an blank line here.
> Is it necessary to send v3 for this?
Let us see once you have Robbie's tested-by. Depending on who picks up we can
check with them.
--
Regards,
Sudeep
