Re: [PATCH 4/7] coresight: etm4x: Change etm4_platform_driver driver for MMIO devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/03/2023 03:04, Anshuman Khandual wrote:
This updates existing etm4_platform_driver to accommodate MMIO based device
tree represented coresight etm4x devices along with current sysreg ones. It
first looks for 'apb_clk' clock and tries to enable it via a new helper i.e
coresight_get_enable_apb_pclk(). If 'apb_clock' is not found on the system
as indicated by a return value 'NULL', ignore and proceed further assuming
that platform already has got required clocks enabled. But if the clock is
but could not be enabled, device probe fails with -ENODEV. Similarly iomem
base address is fetched via devm_ioremap_resource() onyl when the platform
has valid 'struct resource'. The probed device is ensured to be a coresight
etm4x, via two new helpers in etm4_init_iomem_access(). This also registers
runtime power management callbacks i.e for suspend and resume operations.

This looks too much detail about the actual implementation of HOW rather
than WHAT.

Could it be something like :

"Add support for handling MMIO based devices via platform driver. We
need to make sure that :
  1) The APB clock, if present is enabled at probe and via runtime_pm ops.
  2) Use the ETM4x architecture/CoreSight Architecture registers to
     identify a device as CoreSight ETM4x, instead of relying a white
     list of "Peripheral IDs"
The driver doesn't get to handle the devices yet, until we wire the ACPI
and DT changes to move the devices to be handled via platform driver
than the etm4_amba driver.
"


Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Mike Leach <mike.leach@xxxxxxxxxx>
Cc: Leo Yan <leo.yan@xxxxxxxxxx>
Cc: coresight@xxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
---
  .../coresight/coresight-etm4x-core.c          | 62 +++++++++++++++++--
  drivers/hwtracing/coresight/coresight-etm4x.h |  3 +
  include/linux/coresight.h                     | 44 +++++++++++++
  3 files changed, 105 insertions(+), 4 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index a4c138e67920..60f027e33aa0 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -30,6 +30,7 @@
  #include <linux/platform_device.h>
  #include <linux/pm_runtime.h>
  #include <linux/property.h>
+#include <linux/clk/clk-conf.h>
#include <asm/barrier.h>
  #include <asm/sections.h>
@@ -1067,12 +1068,24 @@ static bool etm4_init_sysreg_access(struct etmv4_drvdata *drvdata,
  	return true;
  }
+static bool is_etm4x_device(void __iomem *base)
+{
+	u32 devarch = readl(base + TRCDEVARCH);
+	u32 devtype = readl(base + TRCDEVTYPE);
+
+	return (((devarch & ETM_DEVARCH_ID_MASK) == ETM_DEVARCH_ETMv4x_ARCH) &&
+		(devtype == ETM_DEVTYPE_ETMv4x_ARCH));
+}
+
  static bool etm4_init_iomem_access(struct etmv4_drvdata *drvdata,
  				   struct csdev_access *csa)
  {
  	u32 devarch = readl_relaxed(drvdata->base + TRCDEVARCH);
  	u32 idr1 = readl_relaxed(drvdata->base + TRCIDR1);
+ if (!is_coresight_device(drvdata->base) || !is_etm4x_device(drvdata->base))
+		return false;
+
  	/*
  	 * All ETMs must implement TRCDEVARCH to indicate that
  	 * the component is an ETMv4. To support any broken

Now that we do the is_etm4x_device(), we could the following ^^
TRCDEVARCH check.

@@ -2133,6 +2146,7 @@ static int etm4_probe_amba(struct amba_device *adev, const struct amba_id *id)
static int etm4_probe_platform_dev(struct platform_device *pdev)
  {
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	struct etmv4_drvdata *drvdata;
  	int ret;
@@ -2140,7 +2154,16 @@ static int etm4_probe_platform_dev(struct platform_device *pdev)
  	if (!drvdata)
  		return -ENOMEM;
- drvdata->base = NULL;
+	drvdata->pclk = coresight_get_enable_apb_pclk(&pdev->dev);
+	if (IS_ERR(drvdata->pclk))
+		return -ENODEV;
+
+	if (res) {
+		drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(drvdata->base))
+			return PTR_ERR(drvdata->base);

Drop the clock reference ?

+	}
+
  	dev_set_drvdata(&pdev->dev, drvdata);
  	pm_runtime_get_noresume(&pdev->dev);
  	pm_runtime_set_active(&pdev->dev);
@@ -2186,7 +2209,7 @@ static struct amba_cs_uci_id uci_id_etm4[] = {
  		/*  ETMv4 UCI data */
  		.devarch	= ETM_DEVARCH_ETMv4x_ARCH,
  		.devarch_mask	= ETM_DEVARCH_ID_MASK,
-		.devtype	= 0x00000013,
+		.devtype	= ETM_DEVTYPE_ETMv4x_ARCH,
  	}
  };
@@ -2244,6 +2267,10 @@ static int __exit etm4_remove_platform_dev(struct platform_device *pdev) if (drvdata)
  		ret = etm4_remove_dev(drvdata);
+
+	if (!IS_ERR(drvdata->pclk))
+		clk_put(drvdata->pclk);
+
  	pm_runtime_disable(&pdev->dev);

If we re-order the clk_put() after pm_runtime_disable(), we could use a label to jump here from the ioremap_resource failure.

  	return ret;
  }
@@ -2284,7 +2311,34 @@ static struct amba_driver etm4x_amba_driver = {
  	.id_table	= etm4_ids,
  };
-static const struct of_device_id etm4_sysreg_match[] = {
+#ifdef CONFIG_PM
+static int etm4_runtime_suspend(struct device *dev)
+{
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
+
+	if (!IS_ERR(drvdata->pclk))
+		clk_disable_unprepare(drvdata->pclk);
+
+	return 0;
+}
+
+static int etm4_runtime_resume(struct device *dev)
+{
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
+
+	if (!IS_ERR(drvdata->pclk))
+		clk_prepare_enable(drvdata->pclk);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops etm4_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(etm4_runtime_suspend, etm4_runtime_resume, NULL)
+};

Where is this hooked in ?

+
+static const struct of_device_id etm4_match[] = {
+	{ .compatible	= "arm,coresight-etm4x" },
  	{ .compatible	= "arm,coresight-etm4x-sysreg" },
  	{ .compatible	= "arm,embedded-trace-extension" },
  	{}
@@ -2295,7 +2349,7 @@ static struct platform_driver etm4_platform_driver = {
  	.remove		= etm4_remove_platform_dev,
  	.driver			= {
  		.name			= "coresight-etm4x",
-		.of_match_table		= etm4_sysreg_match,
+		.of_match_table		= etm4_match,
  		.suppress_bind_attrs	= true,
  	},
  };
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 434f4e95ee17..5a37df4a02e9 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -701,6 +701,8 @@
  #define ETM_DEVARCH_ETE_ARCH						\
  	(ETM_DEVARCH_ARCHITECT_ARM | ETM_DEVARCH_ARCHID_ETE | ETM_DEVARCH_PRESENT)
+#define ETM_DEVTYPE_ETMv4x_ARCH 0x00000013
+
  #define TRCSTATR_IDLE_BIT		0
  #define TRCSTATR_PMSTABLE_BIT		1
  #define ETM_DEFAULT_ADDR_COMP		0
@@ -1017,6 +1019,7 @@ struct etmv4_save_state {
   * @arch_features: Bitmap of arch features of etmv4 devices.
   */
  struct etmv4_drvdata {
+	struct clk			*pclk;

Please document the field, above the structure.

  	void __iomem			*base;
  	struct coresight_device		*csdev;
  	spinlock_t			spinlock;
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index f85b041ea475..75a7aa6d7444 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -6,6 +6,8 @@
  #ifndef _LINUX_CORESIGHT_H
  #define _LINUX_CORESIGHT_H
+#include <linux/amba/bus.h>
+#include <linux/clk.h>
  #include <linux/device.h>
  #include <linux/io.h>
  #include <linux/perf_event.h>
@@ -370,6 +372,48 @@ static inline u32 csdev_access_relaxed_read32(struct csdev_access *csa,
  	return csa->read(offset, true, false);
  }
+#define CORESIGHT_CIDRn(i) (0xFF0 + ((i) * 4))
+
+static inline u32 coresight_get_cid(void __iomem *base)
+{
+	u32 i, cid = 0;
+
+	for (i = 0; i < 4; i++)
+		cid |= readl(base + CORESIGHT_CIDRn(i)) << (i * 8);
+
+	return cid;
+}
+
+static inline bool is_coresight_device(void __iomem *base)
+{
+	u32 cid = coresight_get_cid(base);
+
+	return cid == CORESIGHT_CID;
+}
+
+/*
+ * This function attempts to find a 'apb_pclk' clock on the system and
+ * if found, enables it. This returns NULL if 'apb_pclk' clock is not
+ * and return error pointer from clk_prepare_enable(), if it fails to
+ * enable the discovered clock.

minor nit: Easier if it is something like:

	Attempt to find and enable "APB clock" for the given device.

	Returns:
		NULL	- No clock found
		clk	- Clock is found and enabled.
		ERROR	- Failed to enable the clock.


Suzuki




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux