Re: [PATCH v2 4/4] ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2023-03-13 at 15:34 +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> When a cpufreq policy appears or goes away, the CPU cooling devices
> for
> the CPUs covered by that policy need to be updated so that the new
> processor_get_max_state() value is stored as max_state and the
> statistics in sysfs are rearranged for each of them.
> 
> Do that accordingly in acpi_thermal_cpufreq_init() and
> acpi_thermal_cpufreq_exit().
> 
> Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
> Reported-by: Wang, Quanxian <quanxian.wang@xxxxxxxxx>
> Link: 
> https://lore.kernel.org/linux-pm/53ec1f06f61c984100868926f282647e57ecfb2d.camel@xxxxxxxxx/
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Tested-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Reviewed-by: Zhang Rui <rui.zhang@xxxxxxxxx>

thanks,
rui

> ---
> 
> v1 -> v2: Remove the now redundant IS_ERR() checks on cdev before
> calling
>           thermal_cooling_device_update().
> 
> ---
>  drivers/acpi/processor_thermal.c |   14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> Index: linux-pm/drivers/acpi/processor_thermal.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/processor_thermal.c
> +++ linux-pm/drivers/acpi/processor_thermal.c
> @@ -140,9 +140,13 @@ void acpi_thermal_cpufreq_init(struct cp
>  		ret = freq_qos_add_request(&policy->constraints,
>  					   &pr->thermal_req,
>  					   FREQ_QOS_MAX, INT_MAX);
> -		if (ret < 0)
> +		if (ret < 0) {
>  			pr_err("Failed to add freq constraint for CPU%d
> (%d)\n",
>  			       cpu, ret);
> +			continue;
> +		}
> +
> +		thermal_cooling_device_update(pr->cdev);
>  	}
>  }
>  
> @@ -153,8 +157,12 @@ void acpi_thermal_cpufreq_exit(struct cp
>  	for_each_cpu(cpu, policy->related_cpus) {
>  		struct acpi_processor *pr = per_cpu(processors, cpu);
>  
> -		if (pr)
> -			freq_qos_remove_request(&pr->thermal_req);
> +		if (!pr)
> +			continue;
> +
> +		freq_qos_remove_request(&pr->thermal_req);
> +
> +		thermal_cooling_device_update(pr->cdev);
>  	}
>  }
>  #else				/* ! CONFIG_CPU_FREQ */
> 
> 
> 




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux