On 2/8/2023 7:57 AM, Mika Westerberg wrote:
Hi,
On Tue, Feb 07, 2023 at 09:33:55AM -0700, Raul Rangel wrote:
Sorry, resending in plain text mode.
On Tue, Feb 7, 2023 at 12:25 AM Mika Westerberg
<mika.westerberg@xxxxxxxxxxxxxxx> wrote:
After commit b38f2d5d9615 ("i2c: acpi: Use ACPI wake capability bit to
set wake_irq") the I2C core has been setting I2C_CLIENT_WAKE for ACPI
devices if they announce to be wake capable in their device description.
However, on certain systems where audio codec has been connected through
I2C this causes system suspend to wake up immediately because power to
the codec is turned off which pulls the interrupt line "low" triggering
wake up.
Possible reason why the interrupt is marked as wake capable is that some
codecs apparently support "Wake on Voice" or similar functionality.
That's generally a bug in the ACPI tables. The wake bit shouldn't be
set if the power domain for the device is powered off on suspend. The
best thing is to fix the ACPI tables, but if you can't, then you can
set the ignore_wake flag for the device:
https://github.com/torvalds/linux/blob/master/drivers/gpio/gpiolib-acpi.c#L31.
If that works we can add a quirk for the device:
https://github.com/torvalds/linux/blob/master/drivers/gpio/gpiolib-acpi.c#L1633.
I've seen this one already and also tried to use it, but it didn't work.
Also when I was reading code I wasn't really convinced that it is linked
to i2c in any straightforward way. I mean i2c decides in different
places that it has wake support (I even added some prints to make sure
;). The code you pointed out decides in
https://github.com/torvalds/linux/blob/master/drivers/gpio/gpiolib-acpi.c#L387
but i2c code seems to decide in
https://github.com/torvalds/linux/blob/master/drivers/i2c/i2c-core-acpi.c#L176
where it just checks if irq flags has wake_capable flag set. When I
looked at it previously I was pretty sure it comes straight from BIOS
and passes the quirk code you mentioned, still I may have missed something.
I think (hope) these systems are not yet available for public so there
is a chance that the tables can still be fixed, without need to add any
quirks.
@Amadeusz, @Cezary, if that's the case I suggest filing a bug against
the BIOS.
Well, I tried custom DSDT and had problems, but I just remembered that I
probably need to pass "revision+1" in file, so kernel sees it as a newer
version, let me try again. Is it enough to replace "ExclusiveAndWake"
with "Exclusive"?
In any case, I don't think we should be enabling wakeup by default on
all I2C devices that are wake capable. According to device_init_wakeup()
documentation most devices should leave it disabled, with exceptions on
devices such as keyboards, power buttons etc. Userspace can enable
wakeup as needed by writing to device "power/wakeup" attribute.
Enabling wake by default was an unintended side-effect. I didn't catch
this when I wrote the patch :/ It's been exposing all the incorrect
ACPI configurations for better or worse. Mario pushed a patch up
earlier to disable thes Wake GPIOs when using S3:
https://github.com/torvalds/linux/commit/d63f11c02b8d3e54bdb65d8c309f73b7f474aec4.
Are you having problems with S3 or S0iX?
I think this case is S0ix.
We test both cases in our setups.
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
Hi,
Sending this as RFC because I'm not too familiar with the usage of
I2C_CLIENT_WAKE and whether this is something that is expected behaviour
in users of I2C devices. On ACPI side I think this is the correct thing
to do at least.
drivers/i2c/i2c-core-base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 087e480b624c..7046549bdae7 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -527,7 +527,7 @@ static int i2c_device_probe(struct device *dev)
goto put_sync_adapter;
}
- device_init_wakeup(&client->dev, true);
+ device_init_wakeup(&client->dev, false);
This would be a change in behavior for Device Tree. Maybe you can
declare a `bool enable_wake = true`, then in the ACPI branch
(https://github.com/torvalds/linux/blob/master/drivers/i2c/i2c-core-base.c#L495)
set `enable_wake = false`. This would keep wakes enabled by default on
device tree and disabled for ACPI. This matches the original behavior
before my patch.
I don't think it's a good idea to make the behaviour different. Drivers
in general do not need to know whether the device was enumerated on ACPI
or DT or whatnot. Same goes for users who should expect similar
behaviour on the same device.
I wonder what is the reason why I2C bus does this for all wake capable
devices in the first place? Typically it should be up to the user to
enable them not the opposite.
