Re: [PATCH v1 0/3] thermal: intel: int340x: Use generic trip points table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rafael,

On Thu, 2023-01-26 at 14:13 +0100, Rafael J. Wysocki wrote:
> On Thursday, January 26, 2023 1:02:59 AM CET srinivas pandruvada
> wrote:
> > Hi Rafael,
> > 
> > 
> 

[...]

> I've added the appended patch to the thermal-intel-test branch.  Can
> you please
> check if it makes that difference in behavior go away?
I synced the tree again and your patch in thermal-intel-test fixes the
issue.

Thanks,
Srinivas
> 
> ---
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> Subject: [PATCH] thermal: ACPI: Initialize trips if temperature is
> out of range
> 
> In some cases it is still useful to register a trip point if the
> temperature returned by the corresponding ACPI thermal object (for
> example, _HOT) is invalid to start with, because the same ACPI
> thermal object may start to return a valid temperature after a
> system configuration change (for example, from an AC power source
> to battery an vice versa).
> 
> For this reason, if the ACPI thermal object evaluated by
> thermal_acpi_trip_init() successfully returns a temperature value
> that
> is out of the range of values taken into account, initialize the trip
> point using THERMAL_TEMP_INVALID as the temperature value instead of
> returning an error to allow the user of the trip point to decide what
> to do with it.
> 
> Also update pch_wpt_add_acpi_psv_trip() to reject trip points with
> invalid temperature values.
> 
> Fixes: 7a0e39748861 ("thermal: ACPI: Add ACPI trip point routines")
> Reported-by: Srinivas Pandruvada
> <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> ---
>  drivers/thermal/intel/intel_pch_thermal.c |    2 +-
>  drivers/thermal/thermal_acpi.c            |    7 ++++---
>  2 files changed, 5 insertions(+), 4 deletions(-)
> 
> Index: linux-pm/drivers/thermal/thermal_acpi.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_acpi.c
> +++ linux-pm/drivers/thermal/thermal_acpi.c
> @@ -64,13 +64,14 @@ static int thermal_acpi_trip_init(struct
>                 return -ENODATA;
>         }
>  
> -       if (temp < TEMP_MIN_DECIK || temp >= TEMP_MAX_DECIK) {
> +       if (temp >= TEMP_MIN_DECIK && temp <= TEMP_MAX_DECIK) {
> +               trip->temperature =
> deci_kelvin_to_millicelsius(temp);
> +       } else {
>                 acpi_handle_debug(adev->handle, "%s result %llu out
> of range\n",
>                                   obj_name, temp);
> -               return -ENODATA;
> +               trip->temperature = THERMAL_TEMP_INVALID;
>         }
>  
> -       trip->temperature = deci_kelvin_to_millicelsius(temp);
>         trip->hysteresis = 0;
>         trip->type = type;
>  
> Index: linux-pm/drivers/thermal/intel/intel_pch_thermal.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/intel/intel_pch_thermal.c
> +++ linux-pm/drivers/thermal/intel/intel_pch_thermal.c
> @@ -107,7 +107,7 @@ static void pch_wpt_add_acpi_psv_trip(st
>                 return;
>  
>         ret = thermal_acpi_trip_passive(adev, &ptd-
> >trips[*nr_trips]);
> -       if (ret)
> +       if (ret || ptd->trips[*nr_trips].temperature <= 0)
>                 return;
>  
>         ++(*nr_trips);
> 
> 
> 




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux