[PATCH v3 5/8] ACPI: property: Dig "rotation" property for devices with CSI2 _CRS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dig "rotation" property value for devices with _CRS CSI2 resource
descriptor. The value comes from _PLD (physical location of device)
object, if it exists for the device.

This way camera sensor drivers that know the "rotation" property do not
need to care about _PLD on ACPI.

Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
 drivers/acpi/mipi.c     | 16 ++++++++++++++++
 include/acpi/acpi_bus.h |  1 +
 2 files changed, 17 insertions(+)

diff --git a/drivers/acpi/mipi.c b/drivers/acpi/mipi.c
index 5dbdf33a13831..b81bfa1edd8ad 100644
--- a/drivers/acpi/mipi.c
+++ b/drivers/acpi/mipi.c
@@ -629,16 +629,32 @@ static void init_port_csi2_remote(struct acpi_device *device,
  */
 void acpi_init_swnodes(struct acpi_device *device)
 {
+	struct fwnode_handle *fwnode = acpi_fwnode_handle(device);
 	struct acpi_device_software_nodes *ads;
 	struct acpi_buffer buffer = { .length = ACPI_ALLOCATE_BUFFER };
 	struct fwnode_handle *primary;
+	struct acpi_pld_info *pld;
+	unsigned int prop_index = 0;
 	unsigned int i;
+	u32 val;
 	int ret;
 
 	device->swnodes = ads = crs_csi2_swnode_get(device->handle);
 	if (!ads)
 		return;
 
+	/*
+	 * Check if "rotation" property exists and if it doesn't but there's a
+	 * _PLD object, then get the rotation value from there.
+	 */
+	if (fwnode_property_read_u32(fwnode, "rotation", &val) &&
+	    ACPI_SUCCESS(acpi_get_physical_device_location(acpi_device_handle(device),
+							   &pld))) {
+		ads->dev_props[NEXT_PROPERTY(prop_index, DEV_ROTATION)] =
+			PROPERTY_ENTRY_U32("rotation", pld->rotation * 45U);
+		kfree(pld);
+	}
+
 	if (ACPI_FAILURE(acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer))) {
 		acpi_handle_warn(acpi_device_handle(device), "cannot get path name\n");
 		return;
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 9a7729e96d14c..3c4a1daed33f1 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -361,6 +361,7 @@ struct acpi_device_data {
 struct acpi_gpio_mapping;
 
 enum acpi_device_swnode_dev_props {
+	ACPI_DEVICE_SWNODE_DEV_ROTATION,
 	ACPI_DEVICE_SWNODE_DEV_NUM_OF,
 	ACPI_DEVICE_SWNODE_DEV_NUM_ENTRIES
 };
-- 
2.30.2




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux