On Sat, Jan 21, 2023 at 07:48:11AM -0600, Mario Limonciello wrote:
> commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
> adjusted the policy to enable wakeup by default if the ACPI tables
> indicated that a device was wake capable.
>
> It was reported however that this broke suspend on at least two System76
> systems in S3 mode and two Lenovo Gen2a systems, but only with S3.
> When the machines are set to s2idle, wakeup behaves properly.
>
> Configuring the GPIOs for wakeup with S3 doesn't work properly, so only
> set it when the system supports low power idle.
Fine by me,
Acked-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
> Fixes: b38f2d5d9615c ("i2c: acpi: Use ACPI wake capability bit to set wake_irq")
> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2357
> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2162013
> Reported-by: Nathan Smythe <ncsmythe@xxxxxxxxxxxx>
> Tested-by: Nathan Smythe <ncsmythe@xxxxxxxxxxxx>
> Suggested-by: Raul Rangel <rrangel@xxxxxxxxxxxx>
> Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> ---
> drivers/gpio/gpiolib-acpi.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
> index 9ef0f5641b521..17c53f484280f 100644
> --- a/drivers/gpio/gpiolib-acpi.c
> +++ b/drivers/gpio/gpiolib-acpi.c
> @@ -1104,7 +1104,8 @@ int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, in
> dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
> }
>
> - if (wake_capable)
> + /* avoid suspend issues with GPIOs when systems are using S3 */
> + if (wake_capable && acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
> *wake_capable = info.wake_capable;
>
> return irq;
> --
> 2.34.1
>
--
With Best Regards,
Andy Shevchenko
