On Mon, Jan 16, 2023 at 01:37:02PM -0600, Mario Limonciello wrote: > commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") > changed the policy such that I2C touchpads may be able to wake up the > system by default if the system is configured as such. > > However on Clevo NL5xRU there is a mistake in the ACPI tables that the > TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level > triggered but connected to a pull up. As soon as the system suspends the > touchpad loses power and then the system wakes up. > > To avoid this problem, introduce a quirk for this model that will prevent > the wakeup capability for being set for GPIO 9. Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") > Reported-by: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx> > Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 > Co-developed-by: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx> > Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx> > --- > drivers/gpio/gpiolib-acpi.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c > index 4287555a12408..9ef0f5641b521 100644 > --- a/drivers/gpio/gpiolib-acpi.c > +++ b/drivers/gpio/gpiolib-acpi.c > @@ -1623,6 +1623,19 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = { > .ignore_interrupt = "AMDI0030:00@18", > }, > }, > + { > + /* > + * Spurious wakeups from TP_ATTN# pin > + * Found in BIOS 1.7.8 > + * https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 > + */ > + .matches = { > + DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"), > + }, > + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { > + .ignore_wake = "ELAN0415:00@9", > + }, > + }, > {} /* Terminating entry */ > }; > > -- > 2.34.1 > -- With Best Regards, Andy Shevchenko