This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. This allows each ftrace callsite to provide an ftrace_ops to the common ftrace trampoline, allowing each callsite to invoke distinct tracer functions without the need to fall back to list processing or to allocate custom trampoliens for each callsite. This significantly speeds up cases where multiple distinct trace functions are used and callsites are mostly traced by a single tracer. The main idea is to place a pointer to the ftrace_ops as a literal at a fixed offset from the function entry point, which can be recovered by the common ftrace trampoline. Using a 64-bit literal avoids branch range limitations, and permits the ops to be swapped atomically without special considerations that apply to code-patching. In future this will also allow for the implementation of DYNAMIC_FTRACE_WITH_DIRECT_CALLS without branch range limitations by using additional fields in struct ftrace_ops. As noted in the core patch adding support for DYNAMIC_FTRACE_WITH_CALL_OPS, this approach allows for directly invoking ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or part of a module), without going via ftrace_ops_list_func. Currently, this approach is not compatible with CLANG_CFI, as the presence/absence of pre-function NOPs changes the offset of the pre-function type hash, and there's no existing mechanism to ensure a consistent offset for instrumented and uninstrumented functions. When CLANG_CFI is enabled, the existing scheme with a global ops->func pointer is used, and there should be no functional change. I am currently working with others to allow the two to work together in future (though this will liekly require updated compiler support). I've benchamrked this with the ftrace_ops sample module [1], which is not currently upstream, but available at: https://lore.kernel.org/lkml/20230103124912.2948963-1-mark.rutland@xxxxxxx git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git ftrace-ops-sample-20230109 Using that module I measured the total time taken for 100,000 calls to a trivial instrumented function, with a number of tracers enabled with relevant filters (which would apply to the instrumented function) and a number of tracers enabled with irrelevant filters (which would not apply to the instrumented function). I tested on an M1 MacBook Pro, running under a HVF-accelerated QEMU VM (i.e. on real hardware). Before this patch: Number of tracers || Total time | Per-call average time (ns) Relevant | Irrelevant || (ns) | Total | Overhead =========+============++=============+==============+============ 0 | 0 || 94,583 | 0.95 | - 0 | 1 || 93,709 | 0.94 | - 0 | 2 || 93,666 | 0.94 | - 0 | 10 || 93,709 | 0.94 | - 0 | 100 || 93,792 | 0.94 | - ---------+------------++-------------+--------------+------------ 1 | 1 || 6,467,833 | 64.68 | 63.73 1 | 2 || 7,509,708 | 75.10 | 74.15 1 | 10 || 23,786,792 | 237.87 | 236.92 1 | 100 || 106,432,500 | 1,064.43 | 1063.38 ---------+------------++-------------+--------------+------------ 1 | 0 || 1,431,875 | 14.32 | 13.37 2 | 0 || 6,456,334 | 64.56 | 63.62 10 | 0 || 22,717,000 | 227.17 | 226.22 100 | 0 || 103,293,667 | 1032.94 | 1031.99 ---------+------------++-------------+--------------+-------------- Note: per-call overhead is estiamated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. After this patch Number of tracers || Total time | Per-call average time (ns) Relevant | Irrelevant || (ns) | Total | Overhead =========+============++=============+==============+============ 0 | 0 || 94,541 | 0.95 | - 0 | 1 || 93,666 | 0.94 | - 0 | 2 || 93,709 | 0.94 | - 0 | 10 || 93,667 | 0.94 | - 0 | 100 || 93,792 | 0.94 | - ---------+------------++-------------+--------------+------------ 1 | 1 || 281,000 | 2.81 | 1.86 1 | 2 || 281,042 | 2.81 | 1.87 1 | 10 || 280,958 | 2.81 | 1.86 1 | 100 || 281,250 | 2.81 | 1.87 ---------+------------++-------------+--------------+------------ 1 | 0 || 280,959 | 2.81 | 1.86 2 | 0 || 6,502,708 | 65.03 | 64.08 10 | 0 || 18,681,209 | 186.81 | 185.87 100 | 0 || 103,550,458 | 1,035.50 | 1034.56 ---------+------------++-------------+--------------+------------ Note: per-call overhead is estiamated relative to the baseline case with 0 relevant tracers and 0 irrelevant tracers. As can be seen from the above: a) Whenever there is a single relevant tracer function associated with a tracee, the overhead of invoking the tracer is constant, and does not scale with the number of tracers which are *not* associated with that tracee. b) The overhead for a single relevant tracer has dropped to ~1/7 of the overhead prior to this series (from 13.37ns to 1.86ns). This is largely due to permitting calls to dynamically-allocated ftrace_ops without going through ftrace_ops_list_func. Signed-off-by: Mark Rutland <mark.rutland@xxxxxxx> Cc: Catalin Marinas <catalin.marinas@xxxxxxx> Cc: Florent Revest <revest@xxxxxxxxxxxx> Cc: Masami Hiramatsu <mhiramat@xxxxxxxxxx> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx> Cc: Will Deacon <will@xxxxxxxxxx> --- arch/arm64/Kconfig | 3 + arch/arm64/Makefile | 5 +- arch/arm64/include/asm/ftrace.h | 15 +-- arch/arm64/kernel/asm-offsets.c | 4 + arch/arm64/kernel/entry-ftrace.S | 32 ++++++- arch/arm64/kernel/ftrace.c | 156 +++++++++++++++++++++++++++++++ 6 files changed, 195 insertions(+), 20 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 03934808b2ed..7838f568fa15 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -123,6 +123,7 @@ config ARM64 select DMA_DIRECT_REMAP select EDAC_SUPPORT select FRAME_POINTER + select FUNCTION_ALIGNMENT_8B if DYNAMIC_FTRACE_WITH_CALL_OPS select GENERIC_ALLOCATOR select GENERIC_ARCH_TOPOLOGY select GENERIC_CLOCKEVENTS_BROADCAST @@ -186,6 +187,8 @@ config ARM64 select HAVE_DYNAMIC_FTRACE select HAVE_DYNAMIC_FTRACE_WITH_ARGS \ if $(cc-option,-fpatchable-function-entry=2) + select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \ + if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG) select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \ if DYNAMIC_FTRACE_WITH_ARGS select HAVE_EFFICIENT_UNALIGNED_ACCESS diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index d62bd221828f..4c3be442fbb3 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -139,7 +139,10 @@ endif CHECKFLAGS += -D__aarch64__ -ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y) +ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS),y) + KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY + CC_FLAGS_FTRACE := -fpatchable-function-entry=4,2 +else ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y) KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY CC_FLAGS_FTRACE := -fpatchable-function-entry=2 endif diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index 5664729800ae..1c2672bbbf37 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -62,20 +62,7 @@ extern unsigned long ftrace_graph_call; extern void return_to_handler(void); -static inline unsigned long ftrace_call_adjust(unsigned long addr) -{ - /* - * Adjust addr to point at the BL in the callsite. - * See ftrace_init_nop() for the callsite sequence. - */ - if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS)) - return addr + AARCH64_INSN_SIZE; - /* - * addr is the address of the mcount call instruction. - * recordmcount does the necessary offset calculation. - */ - return addr; -} +unsigned long ftrace_call_adjust(unsigned long addr); #ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS struct dyn_ftrace; diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 2234624536d9..ae345b06e9f7 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -9,6 +9,7 @@ #include <linux/arm_sdei.h> #include <linux/sched.h> +#include <linux/ftrace.h> #include <linux/kexec.h> #include <linux/mm.h> #include <linux/dma-mapping.h> @@ -193,6 +194,9 @@ int main(void) DEFINE(KIMAGE_HEAD, offsetof(struct kimage, head)); DEFINE(KIMAGE_START, offsetof(struct kimage, start)); BLANK(); +#endif +#ifdef CONFIG_FUNCTION_TRACER + DEFINE(FTRACE_OPS_FUNC, offsetof(struct ftrace_ops, func)); #endif return 0; } diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index 3b625f76ffba..350ed81324ac 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -65,13 +65,35 @@ SYM_CODE_START(ftrace_caller) stp x29, x30, [sp, #FREGS_SIZE] add x29, sp, #FREGS_SIZE - sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) - mov x1, x9 // parent_ip (callsite's LR) - ldr_l x2, function_trace_op // op - mov x3, sp // regs + /* Prepare arguments for the the tracer func */ + sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) + mov x1, x9 // parent_ip (callsite's LR) + mov x3, sp // regs + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS + /* + * The literal pointer to the ops is at an 8-byte aligned boundary + * which is either 12 or 16 bytes before the BL instruction in the call + * site. See ftrace_call_adjust() for details. + * + * Therefore here the LR points at `literal + 16` or `literal + 20`, + * and we can find the address of the literal in either case by + * aligning to an 8-byte boundary and subtracting 16. We do the + * alignment first as this allows us to fold the subtraction into the + * LDR. + */ + bic x2, x30, 0x7 + ldr x2, [x2, #-16] // op + + ldr x4, [x2, #FTRACE_OPS_FUNC] // op->func + blr x4 // op->func(ip, parent_ip, op, regs) + +#else + ldr_l x2, function_trace_op // op SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL) - bl ftrace_stub + bl ftrace_stub // func(ip, parent_ip, op, regs) +#endif /* * At the callsite x0-x8 and x19-x30 were live. Any C code will have preserved diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index 38ebdf063255..5545fe1a9012 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -60,6 +60,89 @@ int ftrace_regs_query_register_offset(const char *name) } #endif +unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* + * When using mcount, addr is the address of the mcount call + * instruction, and no adjustment is necessary. + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS)) + return addr; + + /* + * When using patchable-function-entry without pre-function NOPS, addr + * is the address of the first NOP after the function entry point. + * + * The compiler has either generated: + * + * addr+00: func: NOP // To be patched to MOV X9, LR + * addr+04: NOP // To be patched to BL <caller> + * + * Or: + * + * addr-04: BTI C + * addr+00: func: NOP // To be patched to MOV X9, LR + * addr+04: NOP // To be patched to BL <caller> + * + * We must adjust addr to the address of the NOP which will be patched + * to `BL <caller>`, which is at `addr + 4` bytes in either case. + * + */ + if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)) + return addr + AARCH64_INSN_SIZE; + + /* + * When using patchable-function-entry with pre-function NOPs, addr is + * the address of the first pre-function NOP. + * + * Starting from an 8-byte aligned base, the compiler has either + * generated: + * + * addr+00: NOP // Literal (first 32 bits) + * addr+04: NOP // Literal (last 32 bits) + * addr+08: func: NOP // To be patched to MOV X9, LR + * addr+12: NOP // To be patched to BL <caller> + * + * Or: + * + * addr+00: NOP // Literal (first 32 bits) + * addr+04: NOP // Literal (last 32 bits) + * addr+08: func: BTI C + * addr+12: NOP // To be patched to MOV X9, LR + * addr+16: NOP // To be patched to BL <caller> + * + * We must adjust addr to the address of the NOP which will be patched + * to `BL <caller>`, which is at either addr+12 or addr+16 depending on + * whether there is a BTI. + */ + + if (!IS_ALIGNED(addr, sizeof(unsigned long))) { + WARN_RATELIMIT(1, "Misaligned patch-site %pS\n", + (void *)(addr + 8)); + return 0; + } + + /* Skip the NOPs placed before the function entry point */ + addr += 2 * AARCH64_INSN_SIZE; + + /* Skip any BTI */ + if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) { + u32 insn = le32_to_cpu(*(__le32 *)addr); + + if (aarch64_insn_is_bti(insn)) { + addr += AARCH64_INSN_SIZE; + } else if (insn != aarch64_insn_gen_nop()) { + WARN_RATELIMIT(1, "unexpected insn in patch-site %pS: 0x%08x\n", + (void *)addr, insn); + } + } + + /* Skip the first NOP after function entry */ + addr += AARCH64_INSN_SIZE; + + return addr; +} + /* * Replace a single instruction, which may be a branch or NOP. * If @validate == true, a replaced instruction is checked against 'old'. @@ -98,6 +181,13 @@ int ftrace_update_ftrace_func(ftrace_func_t func) unsigned long pc; u32 new; + /* + * When using CALL_OPS, the function to call is associated with the + * call site, and we don't have a global function pointer to update. + */ + if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS)) + return 0; + pc = (unsigned long)ftrace_call; new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, AARCH64_INSN_BRANCH_LINK); @@ -176,6 +266,44 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec, return true; } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS +static const struct ftrace_ops *arm64_rec_get_ops(struct dyn_ftrace *rec) +{ + const struct ftrace_ops *ops = NULL; + + if (rec->flags & FTRACE_FL_CALL_OPS_EN) { + ops = ftrace_find_unique_ops(rec); + WARN_ON_ONCE(!ops); + } + + if (!ops) + ops = &ftrace_list_ops; + + return ops; +} + +static int ftrace_rec_set_ops(const struct dyn_ftrace *rec, + const struct ftrace_ops *ops) +{ + unsigned long literal = ALIGN_DOWN(rec->ip - 12, 8); + return aarch64_insn_write_literal_u64((void *)literal, + (unsigned long)ops); +} + +static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) +{ + return ftrace_rec_set_ops(rec, &ftrace_nop_ops); +} + +static int ftrace_rec_update_ops(struct dyn_ftrace *rec) +{ + return ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec)); +} +#else +static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) { return 0; } +static int ftrace_rec_update_ops(struct dyn_ftrace *rec) { return 0; } +#endif + /* * Turn on the call to ftrace_caller() in instrumented function */ @@ -183,6 +311,11 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { unsigned long pc = rec->ip; u32 old, new; + int ret; + + ret = ftrace_rec_update_ops(rec); + if (ret) + return ret; if (!ftrace_find_callable_addr(rec, NULL, &addr)) return -EINVAL; @@ -193,6 +326,19 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return ftrace_modify_code(pc, old, new, true); } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr) +{ + if (WARN_ON_ONCE(old_addr != (unsigned long)ftrace_caller)) + return -EINVAL; + if (WARN_ON_ONCE(addr != (unsigned long)ftrace_caller)) + return -EINVAL; + + return ftrace_rec_update_ops(rec); +} +#endif + #ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS /* * The compiler has inserted two NOPs before the regular function prologue. @@ -220,6 +366,11 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec) { unsigned long pc = rec->ip - AARCH64_INSN_SIZE; u32 old, new; + int ret; + + ret = ftrace_rec_set_nop_ops(rec); + if (ret) + return ret; old = aarch64_insn_gen_nop(); new = aarch64_insn_gen_move_reg(AARCH64_INSN_REG_9, @@ -237,9 +388,14 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, { unsigned long pc = rec->ip; u32 old = 0, new; + int ret; new = aarch64_insn_gen_nop(); + ret = ftrace_rec_set_nop_ops(rec); + if (ret) + return ret; + /* * When using mcount, callsites in modules may have been initalized to * call an arbitrary module PLT (which redirects to the _mcount stub) -- 2.30.2
