Re: [PATCH v8 7/9] dt/bindings: display: bridge: it6505: Add mode-switch support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/01/2023 11:22, Pin-yen Lin wrote:
> ITE IT6505 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
> 
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
> 
> Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
> 
> ---
> 
> Changes in v8:
> - Updated bindings for data-lanes property
> - Fixed subject prefix

How? It is still wrong. You have slash there.

> 

(...)

>                  port@1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
>                      reg = <1>;
> -                    it6505_out: endpoint {
> +                    it6505_out: endpoint@0 {
> +                        reg = <0>;
>                          remote-endpoint = <&dp_in>;
>                          data-lanes = <0 1>;
>                      };
> @@ -148,3 +173,49 @@ examples:
>              };
>          };
>      };
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c3 {

Just i2c


Best regards,
Krzysztof




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux