Analogix 7625 can be used in systems to switch the DP traffic between two downstreams, which can be USB Type-C DisplayPort alternate mode lane or regular DisplayPort output ports. Update the binding to accommodate this usage by introducing a data-lanes and a mode-switch property on endpoints. Also include the link to the product brief in the bindings. Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx> --- Changes in v7: - Fixed issues reported by dt_binding_check - Updated the schema and the example dts for data-lanes. - Changed to generic naming for the example dts node. Changes in v6: - Remove switches node and use endpoints and data-lanes property to describe the connections. .../display/bridge/analogix,anx7625.yaml | 101 +++++++++++++++++- 1 file changed, 98 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 4590186c4a0b..536dbe8eaf60 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -12,7 +12,8 @@ maintainers: description: | The ANX7625 is an ultra-low power 4K Mobile HD Transmitter - designed for portable devices. + designed for portable devices. Product brief is available at + https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf properties: compatible: @@ -112,10 +113,50 @@ properties: data-lanes: true port@1: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: Video port for panel or connector. + patternProperties: + "^endpoint@[01]$": + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + reg: + maxItems: 1 + + remote-endpoint: true + + data-lanes: + oneOf: + - minItems: 1 + maxItems: 1 + items: + enum: [0, 1, 2, 3] + + - items: + - const: 0 + - const: 1 + + - items: + - const: 2 + - const: 3 + + - items: + - const: 0 + - const: 1 + - const: 2 + - const: 3 + + mode-switch: + type: boolean + description: Register this node as a Type-C mode switch or not. + + required: + - reg + - remote-endpoint + required: - port@0 - port@1 @@ -164,8 +205,12 @@ examples: }; mipi2dp_bridge_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; - anx7625_out: endpoint { + anx7625_out: endpoint@0 { + reg = <0>; remote-endpoint = <&panel_in>; }; }; @@ -186,3 +231,53 @@ examples: }; }; }; + - | + i2c3 { + #address-cells = <1>; + #size-cells = <0>; + + encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&anx7625_dp_pins>; + enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1100_dpbrdg>; + vdd18-supply = <&pp1800_dpbrdg_dx>; + vdd33-supply = <&pp3300_dpbrdg_dx>; + analogix,audio-enable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7625_dp_in: endpoint { + bus-type = <7>; + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + anx_typec0: endpoint@0 { + reg = <0>; + mode-switch; + data-lanes = <0 1>; + remote-endpoint = <&typec_port0>; + }; + anx_typec1: endpoint@1 { + reg = <1>; + mode-switch; + data-lanes = <2 3>; + remote-endpoint = <&typec_port1>; + }; + }; + }; + }; + }; -- 2.39.0.314.g84b9a713c41-goog
